electronic necessities PWC80126 5 In 1 Multi-Device Charging Station User Manual

June 5, 2024
electronic necessities

electronic necessities PWC80126 5 In 1 Multi-Device Charging Station

Introduction

Thank you for purchasing our Sinl Multi-Device Charging Station. Save space while charging 5 devices simultaneously.

Features

  • Space saving, charge up to 5 devices simultaneously (Max 3.4 Amp shared output) Charging multiple devices simultaneously may increase time needed for charging
  • Compatible with wireless charging smartphones, USB devices, Apple Watch®, and Apple AirPods® (Generation 1, Generation 2 and Airpods Pro™)
  • Built-in wireless charging pad with SW output
  • Connect your Apple Watch® and AirPods® charging cables (not included) to charge your devices
  • LED indicator illuminates blue and red when charging
  • Includes 2ft 3.SAmp USB Type-( cable to power station

Wireless Charging Compatible Smartphones:
(lncludingbutnotlimitedto … )

iPhone8 Samsung Galaxy So Edge Plus SamsungGalaxyZFlip
iPhone8Plus Samsung Galaxy SI LGGl
iPhoneX SamsungGalaxyS7 Active LGGJ
iPhoneXs Samsung Galaxy SI Edge LGG6′
iPhoneXsMax Samsung Galaxy 58 LGG6Plus’
iPhoneXr Samsung Galaxy S8 Active LGG7
iPhonell Samsung Galaxy 58 Plus LG G7ThinQ
iPhonellPro Samsung Galaxy Note 8 LGLucid2
iPhonellProMax SamsungGalaxyS9 LGLucid2
iPhoneSE(2020) SamsungGalaxyS9Plus LGOptimusFS
GoogleNexus4 SamsungGalaxyS9Plus LG Optimus G Pro
GoogleNexus5 Samsung Galaxy SlO LGOptimusltL-OSE
GoogleNexus6 Samsung Galaxy SlOe LGSpectrum2
GooglePixel3 Samsung Galaxy SlO Plus LGVu3
GooglePixel3XL Samsung Galaxy Note 10 LGVu3
GooglePixel4 Samsung Galaxy Note 10 Plus LGV30
GooglePixel4XL Samsung Galaxy fold LGVJOPlus
SamsungGalaxyS6 Samsung Galaxy S20 LGV40ThinQ
Samsung Galaxy S6 Active Samsung Galaxy S20+ LGVSOThinQ
SamsungGalaxyS6Edge Samsung Galaxy S20 Ultra (5G) LGV60ThinQ

Operation

Step 1
Insert official Apple Watch TM charger into the cavity.

Press firmly into mold.

Step2
Insert official Apple Lighting TM cable for your Airpods into the silicone holder.

Gently force the lighting cable head into the silicone holder opening until the lightning connector protrudes from the top and is flush with the surface .


Step3
Insert the USB end into the USB ports on the inside of the charging station, and organize cables as shown.

Be sure to organize and tuck the cables in so that they are not protruding or the holder may not sit on the charging base properly. Due to the limited space, it is suggested that the original cables provided with your Apple devices should be used.

Step4

  • To power the station, plug the included USB-C cable into the Type-( port labeled “input” and plug the other end of the usb cable into a USB Wall Adapter. Then plug the USB wall charger into power outlet.
  • The transparent divider LED lights will illuminate blue and the wireless charging LED indicator will flash blue and red, indicating that the charging station is powered on.
  • See below for USB Charger power requirements.

Note: For optimal charging, a SV 3. lamp rated USB Wall adapter should be used. Charging more devices at the same time may cause longer charging times. For best charging performance and faster charging times an 18W QC 3.0 USB wall adapter should be used. Using a USB wall adapter that is below 3.1 Amp rating may result in improper charging

Wireless Charging
Place device on wireless charging area to initiate wireless charging. LED indicator will illuminate red indicating the device is charging.

Wall/Home Charger Requirements
See chart below for the most suitable wall/home charger (not included) to use with your Sinl Charging Station.

Input Ouput(Shared) Charging
SV1A(SW) SV0.9A Max Insufficient
SV 2A (10W) SV 1.9AMax Slower
SV 3.1A (15.SW) SV 2.9A Max Slow
SV 3.1A (15.SW) SV 3.0A Max Medium
SV 3.4A (17W) SV 3.0A Max Fast
SV 3.5A (17.SW) SV 3.4A Max Faster

Removing Your Airpods
Use both hands to properly remove Airpods from the cradle. Hold down the airpod cradle while pulling up on the Airpods to prevent lifting.

Important Safety Information

CAUTION:
Use this only as intended. To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not use within a meter of any water such as swimming pools, bathtubs or sinks. To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only. Never insert objects of any kind, other than authorized item into the product as they may touch dangerous voltage points or short out parts that could result in fire or electrical shock. Do not dispose of this product in fire. Refer to local country, state and city guidelines for appropriate methods of battery disposal. This product contains small parts that may cause choking if swallowed. Not intended for use by children under 3 years of age.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, induding interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co -located or operating in conjunction with any other antenna or transmitter.

However, there is no guarantee that interference will not occur in a particularinstallation.
If this equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Specifications

Input, SV = 3.SA
Output SV = 34A Max

Distributed by Jem Accessories, Inc.

Apple”, iPhone®, Apple Watch®, AirPods® and iOS are licensed or registered trademarks of Apple Inc. Jem Accessories is not affiliated with Apple Inc.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals