NAPCO ISECHUB iSecure Kit User Manual
- June 5, 2024
- NAPCO
Table of Contents
NAPCO ISECHUB iSecure Kit
Thank you for purchasing a NAPCO iSecure kit.
The components in the kit have been preconfigured as a complete system to
allow a quick and easy install-lation. The included keypad, motion sensor and
door/window sensors have been preconfigured in the cloud and are ready to be
downloaded into your Go-Anywhere Hub, with no programming required. First,
activate your new iSecure account on NAPCO ComNet. If you do not have a ComNet
account…
- Go to www.NapcoComNet.com
- Enter your iSecure ID # and the select your service plan
- Go to www.iSecureByNapco.com to configure central station communications
- Click Dealer Login and enter your Dealer User ID, Password and Radio Serial Number
- Click Central Station Reporting
- Enter your central station telephone number
- Enter your central station account number
After you have downloaded the kit configuration into your Go-Anywhere Hub, you can add and easily con-figure any additional devices. For details, see the following pages in WI2240LF:
Adding:
- Keypads / Touchscreens: …………………… page 44
- Motion Sensors page ………………………… page 45
- Glass-Break Sensors ………………………… page 46
- Window / Door Transmitters ……………….. page 47
- Smoke Sensors ………………………………… page 48
- Heat Sensors …………………………………… page 49
- Carbon Monoxide Sensors ………………… page 50
- Panic Buttons ………………………………….. page 51
- Keyfobs ………………………………………….. page 52
- Sirens …………………………………………….. page 53
- Take Over Modules ………………………….. page 54
For all other manuals, visit www.iSecureByNapco.com and click the Resources icon.
NAPCO LIMITED WARRANTY
NAPCO SECURITY TECHNOLOGIES, INC. (NAPCO)
warrants its products to be free from manufacturing defects in materials and
workmanship for thirty-six months following the date of manufacture. NAPCO
will, within said period, at its option, repair or replace any product failing
to operate correctly without charge to the original purchaser or user. This
warranty shall not apply to any equipment, or any part thereof, which has been
repaired by others, improperly installed, improperly used, abused, altered,
damaged, subjected to acts of God, or on which any serial numbers have been
altered, defaced or removed. Seller will not be responsible for any
dismantling or reinstallation charges.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF
MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES
ON THE PART OF NAPCO.
Any action for breach of warranty, including but not limited to any implied
warranty of merchantability, must be brought within the six months following
the end of the warranty period. IN NO CASE SHALL NAPCO
BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE
IS CAUSED BY THE SELLER’S OWN NEGLIGENCE OR FAULT.
In case of defect, contact the security professional who installed and
maintains your security system. In order to exercise the warranty, the product
must be returned by the security professional, shipping costs prepaid and
insured to NAPCO. After repair or replacement, NAPCO assumes the cost of
returning products under warranty. NAPCO shall have no obligation under this
warranty, or otherwise, if the product has been repaired by others, improperly
installed, improperly used, abused, altered, damaged, subjected to accident,
nuisance, flood, fire or acts of God, or on which any serial numbers have been
altered, defaced or removed. NAPCO will not be responsible for any
dismantling, reassembly or reinstallation charges. This warranty contains the
entire warranty. It is the sole warranty and any prior agreements or
representations, whether oral or written, are either merged herein or are
expressly cancelled. NAPCO neither assumes, nor authorizes any other person
purporting to act on its behalf to modify, to change, or to assume for it, any
other warranty or liability concerning its products.
In no event shall NAPCO be liable for an amount in excess of NAPCO’s original
selling price of the product, for any loss or damage, whether direct,
indirect, incidental, consequential, or otherwise arising out of any failure
of the product. Seller’s warranty, as hereinabove set forth, shall not be
enlarged, diminished or affected by and no obligation or liability shall arise
or grow out of Seller’s rendering of technical advice or service in connection
with Buyer’s order of the goods furnished hereunder.
NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY.
Warning: Despite frequent testing, and due to, but not limited to, any or all
of the following; criminal tampering, electrical or communications disruption,
it is possible for the system to fail to perform as expected. NAPCO does not
represent that the product/system may not be compromised or circumvented; or
that the product or system will prevent any personal injury or property loss
by burglary, robbery, fire or otherwise; nor that the product or system will
in all cases provide adequate warning or protection. A properly installed and
maintained alarm may only reduce risk of burglary, robbery, fire or otherwise
but it is not insurance or a guarantee that these events will not occur.
THE PRODUCT FAILED TO GIVE WARNING.
Therefore, the installer should in turn advise the consumer to take any and
all precautions for his or her safety including, but not limited to, fleeing
the premises and calling police or fire department, in order to mitigate the
possibilities of harm and/or damage. NAPCO is not an insurer of either the
property or safety of the user’s family or employees, and limits its liability
for any loss or damage including incidental or consequential damages to
NAPCO’s original selling price of the product regardless of the cause of such
loss or damage. Some states do not allow limitations on how long an implied
warranty lasts or do not allow the exclusion or limitation of incidental or
consequential damages, or differentiate in their treatment of limitations of
liability for ordinary or gross negligence, so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights
and you may also have other rights which vary from state to state.
RADIO AND TELEVISION INTERFERENCE: CAUTION:
Changes or modifications not expressly approved by manufacturer could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and the receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402. Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>