TOJOCK ‎DVP-506 HD DVD Player User Guide

: June 5, 2024
: TOJOCK

Table of Contents

TOJOCK ‎DVP-506 HD DVD Player
Q&A
ACTIVATE WARRANTY
WARRANTY
Need Help?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TOJOCK ‎DVP-506 HD DVD Player

TOJOCK-‎DVP-506-HD-DVD-Player-
PRODUCT

Congratulations on your purchase of this DVD Player. Before using your player, it is recommended that you familiarize yourself with the features, functions, and operations described in this manual. Due to slight modifications in production, the instructions, features, and descriptions in this manual might be slightly different from your product. Design and specifications are subject to change without notice.

Q&A

Black screen/Black and white screen after connecting TV without any setting?

This DVD player supports Multi (AUTO), NTSC, and PAL systems. If you selected or default output type that is not supported by your TV, the screen will flicker with a black and white display.
Press the SETUP button and use the arrow buttons to go to the preference page and then select the correct TV type from the list. (NTSC/PAL)

The device is very noisy when reading discs and also playback.

The device has a little noise when reading the disc at the very beginning. But if it is noisy when playback, it may be defective or damaged during shipping. Please contact us to get a new replacement with your Order ID and shipping address.

Why the DVD player can’t read the files on a USB flash drive?

Check your USB Stick Format: FAT / FAT32, storage up to 32GB.
USB Playback only supports ≤720480 / 720576 Video, Doesn’t support MP4 video files.

Doesn’t read any disc?

1ST, make sure the disc format is correct.
2nd, clean the disc and make sure the disc is full insert the disc tray.
3rd, unplug the power cord, and then plug in the power cord and switch it on again.

The Disc Tray doesn’t open or close? Or suddenly no screen after changing the DVD player’s setting?

Unplug the power cord, and then switch it on again. Take our disc from the DVD player and long-press the “Zoom” button (5-10s) on the remote controller. The DVD player will be reset automatically.