Huize Technology Bluetooth Bracelet headset User Manual
- June 5, 2024
- Huize Technology
Table of Contents
Technology Bluetooth Bracelet headset
User Manual
Downloading the App
Scan the following OR code, download, and install the App.
http://app.crrepa.com/site/download
Scan QR Code and Download
Charging and Active
Insert the charger into the charging port, and connect the other end of the charger to the USB charging head or USB interface of the computer is OK.
Pairing
Long press the [time page] on your device, and go to the detail page. The MAC address on the detail page could help you identify your device on the scanning list.
Smart Watch Features
| Sports Smart
Watch automatically tracks Steps taken, Calories Burned, and Distance traveled
and displays them on the screen.
NOTE: Your movement stats reset to zero at midnight.
---|---
| Sleep
If you keep wearing Smart Watch in your sleep, it can provide the hours slept
and quality of sleep stats on both the screen and the APR.
NOTE: Sleep stats reset to zero at 8:00 pm.
| Heart Rate Test
Long press the heart rate page to start measuring your heart rate.
On the heart rate page, It can show the heart rate measured data of the last 7
times.
| Training
Long press on the training page to start a new training measure recording,
there are 8 sport modes to be chosen.
The last training recording will be shown on the training page.
| Blood Pressure Test
Long press on the blood pressure page to start measuring your blood pressure.
On the blood pressure page, It can show the blood pressure measurement data
for the last 7 times.
| Sp02 Test
Long press the Sp02 page to start measuring your Sp02.
On the Sp02 page, It can show the Sp02 measured data of the last 7 times.
| Weather
It could show the weather info for current and tomorrow on the weather page.
Weather info is synced after connecting with the APP, it will not be updated
after a long disconnect.
| Messages Reminder
The device can sync incoming notifications from Twitter, Facebook, Whatsapp,
Instagram etc. Recently 3 messages can be stored.
Note: You can switch of/off the incoming notification in the APP
| Remote Shutter
After connecting the device can remote contral the camera on your phone.
| Music Play Contraller
After connecting the device can remote contral the music player on your phone.
| Other Features
Other features include a stopwatch, brightness adjustment, mute mode, factory
reset, and power off.
| Stop Watch
Long press on the stopwatch page to start timing, and long press again to stop
timing.
| Silent Alarms
Set up the alarm on the APP, and the device will vibrate to remind on time.
| Remind to Move
The device will vibrate to remind you to make a relax after 1 hour sittiing.
Note: You can switch on/off the feature in the APP
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Watch. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using the Touch Button
Single tap the Touching Area under the main screen to wake up the device and switch to other functional pages. Long press the Touching Area to enter for more functions that are needed. -
Using Quick View
With Quick View, you can check the time or the message from your phone on your Smart Watch without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Operating temperature: 14 to 122 (-10 to 50 )
Non-operating temperature: -4 to 140 (-20 to 60 ) -
Size
Fits a wrist between 5.5 and 7.7 inches in circumference. -
Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to properly dispose of and recycle the Smart Watch and accompanying components. Do not dispose of Smart Watch with common household waste, the Smart Watch unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.
For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.
Headset manual
Control——- same as original
Attention: It’s tapping not touching
- Left: Double tapping, Call Siri
- Left: Triple tapping, Previous
- Right: Triple tapping, Next
- Right: Double tapping, Pause
- Left or Right: Double tapping, Pick up or hang up calls
Common problems and solutions
-
No headphones connected
Take out the headset, put the headset close to the phone (about 5cm, not too far away), turn on the Bluetooth of the phone, find “Airpods” and click connect, if the surrounding battery interference is too large, it will affect the Bluetooth connection. -
Take out the headset, the sound will not pause, or often pause in the ear to interrupt
This is because when the earphones were put into the ears not deep enough, the light sensor of the earphones did not start. If you put the earphones into your ears and go deeper, this problem can be solved. -
The connection is stuck, delayed, or broken
Due to the properties of Bluetooth straight: unstable and easy to interfere with WIFI, Bluetooth headset may occasionally be stuck, delayed, or broken, just reconnect -
No sound from a single headset
A. The earphone may not be placed in the charging compartment, please put them tightly again.
The earphones may be out of power. Put the earphones into the charging compartment and ensure that they are placed close to the charge for a while to solve the problem.
FCC Statement
FCC ID: 2AWRW-G36
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>