ASUS 2114797 ROG Balteus QI Wireless Charging RGB Gaming Mouse Pad User Guide

: June 5, 2024
: Asus

Table of Contents

Package contents
Specifications
Device features
Getting started
Safety Guidelines
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Q 19545
Wireless Charging RGB Gaming Mouse Pad
Quick Start Guide
REPUBLIC OF GAMERS

Package contents

ASUS 2114797 ROG Balteus QI Wireless Charging RGB Gaming Mouse
Pad

Specifications

connection	USB 2.0

USB Passthrough Port
Wireless Charging| 1 x USB 2.0
Qi wireless charging
RGB Lighting Effects| 9 lighting effects
Lighting Zone| 15 customizable zones
Lighting Mode Button| Toggles between lighting profiles or brightness
Charging Status Indicator| 1 x LED indicator
Surface| Micro-textured hard surface
Bottom| Non-slip rubber base
Dimension (L x W x H)| 370 x 320 x 7.9mm
Cable| 1 x 2-Meter braided USB Y-cable
1 x 1-Meter Qi wireless charging cable
Operating System| Windows’ 10

Device features

USB 2.0 passthrough port
Micro USB DC-in port.
Qi wireless charging status indicator
Lighting mode button
Qi wireless charging zone
USB pass-through connector
USB connector (PAD)

Getting started

To set up your ROG BALTEUS Qi Wireless Charging RGB Gaming Mouse Pad:
Connect the 1)56 connector (PAD) to an available USB port on your device.

ASUS 2114797 ROG Balteus QI Wireless Charging RGB Gaming Mouse Pad-
usb To set up your USB 2.0 passthrough port:

Connect the USB passthrough connector to an available USB port on your device.
Connect your USB device to the U56 2.0 passthrough port on your mouse pad.

ASUS 2114797 ROG Balteus QI Wireless Charging RGB Gaming Mouse Pad- usb
1

Using the Qi wireless charging function

Connect the bundled Qi w*eless charging cable to the micro USB DC-in port and an adapter.
NOTE: We recommend using an adapter with a minimum of 5V27A power rating for optimal performance.
Plug the adapter into a 100V-240V power source.
Place your device on the Qi wireless charging zone. Ensure that the Qi wireless charging zone is aligned with your device’s Qi charging zone.

CAUTION, DO NOT place metal objects or items containing metal, such as coins, phone cases with metallic components, or credit cards on the charging zone.
Qi wireless charging status indication

ASUS 2114797 ROG Balteus QI Wireless Charging RGB Gaming Mouse Pad-
usb4

Qi wireless charging status indication

LED Status	Description
Blue (slowly blinking)	Fully charged
Blue (blinking)	Charging
Blue (rapidly blinking)	Low charging efficiency
Red (blinking)	Charging failure
Off	Standby

Customizing with ROG Armoury
For more lighting effects, and lighting zone configurations, download and install the ROG Armoury from
https://www.asus.com/ROG-Republic-Of-Gamers/ROG-Balteus- Qi/HelpDeskDownload/.

Ukraine Certification Logo

Service and Support
Visit our multi-language website at hlips://www.asiissom/support/.

https://qr.asus.com/ab92699

EAC Certification Logo

.11 ur I S. IfBalt
CE Mark Warning

Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/Declaration

CE RED RF Output table (Directive 2014/53/EU)

Function	Frequency	Maximum Output Power
Wireless charger	110 – 190 kHz	0.266 dB

UKCA RF Output table (The Radio Equipment Regulations 2017)

Function	Frequency	Maximum Output Power
Wireless charger	110 – 190 kHz	0.266 dB

Simplified UKCA Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (SI 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com.support/.

Manufacturer	ASUSTek COMPUTER INC.
Address, City	1 F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Authorized Representative in Europe	ASUS COMPUTER GmbH
Address	Harkortstrasse 21-23, 40880 Ratingen
Country	Germany
Authorized Representative in United Kingdom	ASUSTEK (UK) LIMITED
Address	1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M

6BL, England
Country| United Kingdom

Proper disposal

DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed-out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the device in fire. DO NOT short circuit the contacts. DO NOT disassemble the device.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information
The radiated output power of the wireless device is below the Industry Canada (IC) radio frequency exposure limits. The wireless device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions (antennas are greater then 20cm from a person’s body).
VCCI: Japan Compliance Statement
VCCI Class B Statement
NCC: Taiwan Wireless Statement
KC: Korea Warning Statement

Safety Guidelines

Keep the device away from liquid, humidity, or moisture. Operate the devie only within the specific temperature range of 0°C (32°F) to 45°C (113°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.
Notices
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1)THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csrasus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csrasus.com/encilish/Takeback.htm for detailed recycling information in different regions.

FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.1077
Responsible Party: Asus Computer International
Address: 48720 Kato Rd, Fremont, CA 94538
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name : ROG Balteus Qi Model Number : NHO1
compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ver. 180620