Shenzhen Yuesheng Technology K18 Car Wireless Charger Instruction Manual
- June 5, 2024
- Shenzhen Yuesheng Technology
Table of Contents
Instruction Manual
Car Wireless Charger Manual
Power:15W,10W,7.5W,5W
Effective transmission distance: 1-8cm Size:
Middle disk diameter: 12.3cm><7.3cm><2.lcm
Charging inte『face: Type C
Packing list: Car bracket x l, Manual Xl,
Data linexl, Car outlet base(clip)xl
functional components
Specifications
- Color:Graw/Silver
- Weight:The net output weight is about 118g
- MaterialABS+PC Vacuum plating
- lnput voltage/current:5V/2A,9V/1.67A
- Output power:15W,10W,7.5W,5W automatic identification
- Working frequency:115-205KHz
- Induction distance:0-8mm
- Support specifications: Comply with QI wireless protocol charging
- Devices that support QC wireless fast charging such as Iphone8,/phone X, Iphone8 plus, Samsung 56, s6edge,s7,s7edge,s8,s84-,s9+
- F-or devices that do not support wireless charging, you need to use the corresponding magnetic head can be used.
Instructions For Use
- Conned the vehicle’s wireless charging devices the appropriate data cable when using it
- Connect the U5B port of the data cable to the charging interface on the car(eg, cigarette lighter switching charger and USB charging port on the car
- The device clip clips the air outlet and can also be placed elsewhere
- After the device Is powered on a 5V-9V DC power supply, It will automatically check the tension, and the red indicator light will be on. when the object Is close to the deck 5cm-20tm, the automatic induction will open the arms and put the phone into the phone, the device will automatically clamp the phone. At this point wireless charging will automatically charge the phone, charging bule light (mobile phone with wireless charging function) when you remove the phone you need to touch the back of the shell at the top of the sensing point, when the hand touches the sensing point position, the device automatically opens double Arm, remove the phone
- This device has over-voltage protection, over-temperature protection, magnetic field protection, and short-circuit protection if the device is abnormal, it will automatically stop working 6.Built in battery, it can be opened and closed normally without connecting power supply, and has a long endurance
Precautions
- Do not over-squeeze or hit the device
- Do not use the wireless charger under severe high temperature, humidity, or corrosive environment to avoid damaging the device’s circuit
Thank You For Using This Product
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>