ASUS MB16AH ZenScreen Portable USB Monitor User Guide

ASUS MB16AH ZenScreen Portable USB Monitor

Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Notices

Federal Communications Commission Statement This device complies with

Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, an
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.

NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR® in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR®. Refer to ENERGYSTAR.gov (www. energystar.gov) for more information on the ENERGY STAR® program.

Safety information

• Before setting up this Portable USB Monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose this Portable USB Monitor to rain or moisture.
• Never try to open this Portable USB Monitor cabinet.
• Before using this Portable USB Monitor, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this Portable USB Monitor in any area where it may become wet. Place this Portable USB Monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this Portable USB Monitor cabinet.
• If you encounter technical problems with this Portable USB Monitor, contact a qualified service technician or your retailer.
• This Portable USB Monitor is powered by USB port which complies with LPS and SELV circuit according to IEC60950-1:2005.
• DO NOT dispose of the product in fire
• DO NOT use monitor near heating equipment or in places where there is likelihood of high temperature
• Keep your monitor away from sharp objects
• DO NOT place objects on top of your monitor

Care & cleaning

• Cleaning. Turn your monitor off and unplug the cable. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com

2. Optional documentation
   Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

Takeback services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.

Product information for EU energy label

Welcome!

Thank you for purchasing the ASUS® Portable USB Monitor!
The latest ASUS Portable USB Monitor provides great portability and simplicity to your daily life, enhancing both of your viewing experience and style.

Package contents

Check your package for the following items:

✓ Portable USB Monitor
✓ Quick Start Guide
✓ Warranty Card
✓ USB Type-C Cable
✓ Protective sleeve
✓ USB Type-C to A Adapter
✓ Micro HDMI to HDMI cable
✓ Power Adapter

|

• If any of the above items is damaged or missing, contact your retailer immediately.

---|---

Monitor introduction

Front View and Charging Instructions

1. Power button/Power LED
   • Press this button to turn the monitor on/off when connected to a valid source.
   • The color definition of the power indicator is as the below table.

2. 5 way key
   • Press the Central button to enter OSD when in connection to a valid source
   

3. Micro-HDMI port
   • Connect to valid source with micro HDMI to HDMI cable.Status| Description
   ---|---
   Blue| ON
   Amber| Standby mode
   Dark| OFF

4. USB Type-C port
   • Used to connect to a valid source such as Notebook/PC (Please make sure your Notebook/PC supports “DP Alt Mode”); signal input supports maximum to resolution 1920 x 1080 @60Hz.

WARNING: The adapter may become warm to hot while in use.
DO NOT cover the adapter and keep it away from your body while it is connected to a power source. If your device become unusual hot, disconnect the USB cable from your device and send the device including the power adapter and USB cable to an ASUS qualified service personnel

QuickFit Function
The QuickFit function contains two patterns: (1) Grid (2) Photo size.

1. Grid pattern: Facilitates designers and users to organize content and
   layout on one page and achieve a consistent look and feel.
   Alignment grid 1 will be rotated automatically if auto rotation is enabled.
   
   

2. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.

Monitor standing positions

You can prop the monitor up in either landscape or portrait mode with the protective sleeve.

Connect the portable monitor with system

NOTE: When connecting with system by HDMI port, please connect inbox adapter to power up the monitor.

OSD (On-Screen Display) menu

How to reconfigure

1. Press the Central of 5-way button to display the OSD menu.
2. Move the key up and down to switch the options in the menu. When you move from one icon to another, the option name is highlighted.
3. To select a highlighted item from the menu, move the key towards right or press the central key.
4. Move the key up and down to select the desired parameters.
5. Move the key towards right or press the central button to enter the slide bar, and then use the Up or Down keys (depending on the indicators in the menu) to make changes.
6. Move the key towards left to return to the previous menu.

Function Introduction

1. Splendid
   This function contains eight sub-functions that you can select for your preference.
   
   • Standard Mode: This is the best choice for document editing with SPLENDIDTM Video Intelligence Technology.
   • sRGB Mode: This is the best choice for viewing photos and graphics from PCs.
   • Scenery Mode: This is the best choice for scenery photo displaying with SPLENDIDTM Video Intelligence Technology.
   • Theater Mode: This is the best choice for movie watching with SPLENDIDTM Video Intelligence Technology.
   • Game Mode: This is the best choice for game playing with SPLENDIDTM Video Intelligence Technology.
   • Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDIDTM Video Intelligence Technology.
   • Reading Mode : This is the best choice for book reading.
   • Darkroom Mode : This is the best choice for a weak ambient light environmen.|

   • In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR functions are not user-configurable.
   • In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast and ASCR functions are not user-configurable.
   • In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast, and Color Temp functions are not user-configurable.
     ---|---

2. Blue Light Filter
   Adjust the energy level of blue light emitted from LED backlight.
   
   • Level 0: No change.
   • Level 1~4: The higher the level,the more blue light will be reduced.

|

  * When Blue Light Filter is activated,the default settings of Standard Mode will  

be automatically imported.

  * Between Level 1 to Level 3, the Brightness function is user-configurable.
  * Level 4 is optimized setting. It is compliance with TUV Low Blue Light  

Certification. The Brightness function is not user-configurable.
---|---
| Please refer to the following to alleviate eye strains:

  * Users should take some time away from the display if working for long hours.  

It is advised to take short breaks (at least 5 mins) after around 1 hour of
continuous working at the computer. Taking short and frequent breaks is more
effective than a single longer break.

  * To minimize eye strain and dryness in your eyes, users should rest the eye  

periodically by focusing on objects that are far away.

  * Eye exercises can help to reduces eye strain. Repeat these exercises often. If  

eye strain continues please consult a physician. Eye exercises: (1) Repeating
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.

  * High energy blue light may lead to eye strain and AMD (Age-Related Macular  

Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to
avoiding CVS (Computer Vision Syndrome).
---|---
3. Color
Select the image color you like from this function

• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish.|

  * In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100.  

---|---
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel and ASCR from this main function.

• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
• VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.|

  * 4:3 is only available when input resolution H:V < 16:9.  

---|---
5. Input Select
Select the input source from HDMI or Type-C input signal.

6. System Setup
   Adjusts the system configuration.
   
   
   • Splendid Demo Mode: Activate the demo mode for the Splendid function.
   • Auto Rotation: To enable/disable rotate image automatically.Please be noted that Auto rotation function is only working under Windows OS by installing DisplayWidget software.
   • ECO Mode: Activate this ecology mode for power saving.
   • Volume: Adjusts the output volume level.
   • GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus:
   • Press GamePlus Button to enter the GamePlus main menu.
   • Activate Crosshair, Timer, FPS Counter or Display Alignment function.
   • Move the button up/down to select and press to confirm the function needed.
   • Crosshair/Timer/FPS Counter is movable by moving 5-way key
   
   • QuickFit: See page 1-4 for details.
   • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen.
   • Language: Select OSD language. The selections are: English, French,
   German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia,
   Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
   Chinese, Japanese, Korean, Persian, Thai and Indonesian.
   • Key Lock: Pushing the 5-way button to the down for more than 5 seconds to disable key locking.
   • Information: Displays the monitor information.
   • Power Key Lock: To disable / enable power key.
   • All Reset: Selects “Yes” to revert all settings to the factory default mode.

7. Shortcut
   Selecting this option allows you to set shortcut key.
   
   • Shortcut : User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Contrast”, “Auto Rotation”, “Input Select”, “Volume” and set as shortcut key.

8. MyFavorite
   Load/Save all settings on the monitor.
   

Specifications

VCCI, J-Moss, UkrSEPRO, RoHS, WEEE,
Windows 7 & 8.1 & 10 WHQL, Blue light filter, Flicker
free, BIS ES8.0, ErP, MEPS, CEL, KCC, E-Standby
Voltage Rating| 5 or 9V     , 2.0A
QC3.0 charging spec is supported
Adapter| ASUS/AD2068M20 100-240V~50/60Hz 0.5A
5V     ,2A(Normal model）
OR 9V     , 2A(Quick charge model）

*Specifications are subject to change without notice.

Troubleshooting (FAQ)

• Press the    button to check if the monitor is in the ON mode.
• Check if the Type-C and HDMI port connected to source of signal.
• Check if the signal source is ON.

The power LED lights blue and there is no screen image|

• Check if the monitor and the computer are in the ON mode.
• Make sure the USB Type-C and HDMI cable is properly connected between the Portable USB Monitor and the computer.
• Inspect the signal cable and make sure none of the pins are bent.
• Connect the computer with another available monitor to check if the computer is properly working.

Screen image is too light or dark|

• Adjust the Brightness settings via the button.

Screen image bounces or a wave pattern is present in the image|

• Make sure the USB Type-C and HDMI cable is properly connected between the Portable USB Monitor and the computer
• Move electrical devices that may cause electrical interference.

Screen image has color defects (white does not look white)|

• Inspect the USB Type-C and HDMI cable and make sure that none of the pins are bent.

After connecting with the USB Type-C source device, the power LED lights continuously blinking or showing ASUS logo repeatly|

•  Insufficient power supply from source USB Type-C devices. Please follow below steps:
• Move the 5-way key downwards continuously, and then connect the USB Type-C cable. This operation will enable built-in safe mode. After displaying ASUS logo, please release the Blue Light Filter button. After ASUS Logo disappearing, there is “safe mode” message OSD showing up. Once “safe mode” message OSD disappears, please set background color to white image or nearly white image (*1)
• Press MENU button, main menu OSD is showing. The upper left corner of the OSD will display small red-colored font “S”, indicating it is now in safe mode. Enter brightness setup, press the up key to tune up brightness. During the process, please note down brightness value “Y” up until MB16AH re-start.(*2). For example, if brightness value shows “70” and MB16AH restarts when adjusting to “71”, “70” is the “Y” value to note down and is the highest brightness value for the connecting USB-C source device.
• Press MENU button, main menu OSD is showing. The upper left corner still indicate “S” as safe mode. Adjust the OSD brightness value to “Y”
• Close the OSD and press Low Blue Low Filter hot key for 5 seconds to turn off safe mode
• Complete.

1: White color background will consume higher power, so it’s better to use white color background to test the power limit from source USB Type-C device.
2: If MB16AH does not re-start when adjusting to value 100, that means
source USB Type-C device has sufficient power supply.

Supported Timing List

PC Supported Primary Timing

VESA Modes, User Available Timing

References

• Homepage | ENERGY STAR
• ASUS Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>