Changzhou Maofa Vehicle Accessories MFWXCV1 Car Mobile Phone Wireless Charger Instructions
- June 4, 2024
- Changzhou Maofa Vehicle Accessories
Table of Contents
Changzhou Maofa Vehicle Accessories MFWXCV1 Car Mobile Phone Wireless
Charger
INTRODUCTION
Thank you for purchusing the wireless charging producas produced by our
company!
The product is based on the original appearance of the original car. In view
of the inconvenience of charging the mobile phone during the current driving
process and the charging method of the original cable, the charging box inside
the charging car is messy and the charging of the mobile phone during driving
is extremely easy to cause a driving hazard . A stylish, beautiful, convenient
and durable wireless charging system specially developed for you, it is the
best choice for providing power support for other electronic products during
driving!
Dear users:
Thank you for using our product, I believe that the product can bring you a
new comfort experience. If you have any suggestions during use, please contact
us timely ..
The driver must ensure that the cae is safety during driving Do not affect
safe driving or even cause serious traffic accidents by viewing the product.
It is stricrly forbidden to operate this product during driving. If the driver
violates the rules during driving, all consequences are irrelevant to the
company! Please read this manual carefully before using this product.
About wireless charger
This product combines the application of wireless charging standards to
help mobile phones, digital products and other products to achieve wireless
charging function. eliminating the need to organize the charging cable. Please
do not place credit card or other magnetic storage media on this product, in
order to avoid losing the stored information due to degaussing.
Basic Product Specification
| Charging standard | WPC Qi I. 2. 4 |
|---|---|
| Operating temperature | -10″C�55″C |
| Storage temperature | -25-C�S0″C |
Input voltage
Input current
| 12V-24V
> 2A
Output voltage| 9V
Output current| I. 66A
Output power| 15W
Conversion efficiency
Transmission frequency
| ;-;,75!1,
110kllz-205kHz;
Over voltage protection| > l0V
Standby| Red light on
Charging| Blue light on
Full charge or foreign body
placed
| Blue light flashing
Solutions of Car Wireless Charging Problems
- The phone can’ t be charged on the wireless charger.
- Check whether there is any metal object on the back of your phone.Remove it, then your phone can be charged.
- Check whether your phone is placed on the center of the coil location.
- Confirm whether your mobile phone can be charged with the wireless charging.If not it needs to be used with the receiver.
In the printing process, if the machine is diff erent from the operation of the manual due to the appearance, software or hardware upgrade process, the company reserves the right of final interpretation!
Enjoy Wireless Charging
Convenient life starts with me
Problem| Problem|
Problem
---|---|---
The charging indicator
does not light up
|
Wireless reception not recognized or started
|
Please check whether there is metal objicts on the product surface
Use wireless charging mobile phone
The cell phone places the wireless reception area
Host is abnormally
|
Please contact dealer
Indicator light flashing continuously
|
Wireless reception did not
start normally
|
Put Mobile phone
into receptive area
Equipment incompatibility
Common Problems of iPhone Charging
-
Please check if the temperature in the car is too high which makes your wireless charging slow. When the ambient temperature is too high when using wireless charging, the charging speed will slow down, which to pr otect the battery life of iPhone.
How to charge more faster?
Make your phone center aligned with the charger coil center, so that the charging speed will be faster. -
The speed will slow down after the iPhone is charged to 70 % of all. This is because of the battery optimization function can protect and extend the battery life of iPhone.
-
The iPhone will not be charged after 80 % of all.
This is a protection function to extend the battery’s life and prevent overcharge accidents. It can be turned off from the interface of the battery optimization. -
The problem of slow charging or no charging.
-
When using wireless charging for iPhone, the power of the mobile phone does not increase or decrease during navigation. The iPhone will give a priority charge to the display and CPU. Because the
-
CPU will consume electricity to generate heat. The mobile phone battery protection mechanism will reduce the charging speed so that the charging speed will slow down.
How to charge more faster with wireless charging?
- Ml. The charging speed is the fastest if the mobile phone center is placed in the wireless charging center.
- M2. When the temperature in the car is too high, the wireless charging speed will be faster if turn on the air conditioner to cool down.
- M3. Too thick phone shell will aff ect the charging speed. The charging speed will be faster if the phone shell is removed.
FCC Statment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co‐located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.