TechToy TSL-LIG-STRIP5M Smart LED Strip Lighting Instruction Manual
- June 5, 2024
- TechToy
Table of Contents
TechToy TSL-LIG-STRIP5M Smart LED Strip Lighting
OPERATING INSTRUCTIONS
Techtoy Wi-Fi LED strip,
The bulb can be controlled through an App „Tesla Smart“. In the App, you can
set up your device and create scenarios and schedules for your lighting.
App Tesla Smart Information
Search and download the free app “Tesla Smart” on Android or iOS. System
requirement for use of the App:• iOS 8.0 or higher • Android 4.4 or higher
Usage and connection
Download and install the app „Tesla Smart“ from the „Apple App Store or Google
Play“ on your smart device. Scan the QR code below for a direct link to the
App.
Launch the „Tesla Smart“ app
Create a new account or log in to your existing account. Make sure Bluetooth is turned on in your smart device, as its necessary for the connection. Plug the LED strip into a socket, and turn on the power. If the light does not flash: Long press the controller key for 5 seconds or longer, until the light is rapidly flashing. (0.5 times per second). When the light flashes, a smart bulb or strip will appear in the app. If the smart bulb or strip does not show up, press „+“ in the upper right corner.
Add a smart bulb or strip by clicking on „+“
Confirm Wi-Fi network and password.
Name the unit, please observe that this will be the same name used when addressing the device from your voice assistants.
Now you can configure and share your system with family and friends. You can
also connect voice assistants like amazon alexa and google assistant to
control your Lighting.
Connecting Voice Assistants
Choose a unit to connect to a voice Assistant. Press the pencil to see the
unit information.
Choose which Voice Assistants to connect to.
CAUTION
- To reduce the risk of electric shock this product should only be opened by an authorized person.
- Unplug the power cord from the wall outlet, if any problems arise.
- Read the operating instructions carefully before use. Keep the instructions for use for future needs.
- Use the device only for its intended purpose.
- Do not use the device if any part is damaged or incorrect. If the device is damaged or incorrectly, it must be replaced immediately.
- The device is for indoor use only. Do not use the device outdoors. Do not expose the product to water or moisture.
- Do not touch the device with wet hands.
- Make sure the base of the bulb matches the lamp holder.
FAQ
Q1: What do you do if the smart bulb does not connect to your Wi-Fi?
Check that the smart bulb or strip is properly connected and has power. Make
sure Bluetooth is enabled on your mobile / tablet. Make sure that the smart
bulb or strip and mobile / tablet are connected to the same network.
Are the devices connected to the internet?
Check that the password for your Wi-Fi is entered correctly. Check that any
firewall is not blocking traffic.
What happens if my Wi-Fi connection is lost?
The smart bulb/strip must be connected to Wi-Fi to be controlled via the App.
How to change the Wi-Fi network or password for Wi-Fi?
Repeat the pairing process from step 5.
How do you reset the smart bulb/strip?
Switch the power to the luminaire on/off 3 times in quick succession (OFF-ON-
OFF-ON-OFF-ON), then wait 1-3 seconds until the smart bulb/strip starts
flashing.
Technical Specification
- Power / Lumen Output: 12V
- Colour temperature: RGB+3000K
- Mains: 220-240 VAC / 50Hz
- Radio Wi-Fi/BLE: 2.405 – 2.483 GHz <20dBm
- Operating temperature: -20C to +40C
- Radio Range (max): 30m
- IP rating: IP20
Radio Standard
- ETSI EN 300 328 V2.2.2 (2019-07)
EMC Standard
- EN 301489-1 V2.1.1 (2017-02),
- EN 301489-17 V3.1.1 (2017-02)
- EN 55015:2013 + A1:2015,
- EN 61547:2009
Safety Standard (LVD)
- IEC 60669-2-1:2002/AMD1:2008/AMD2:2015
- IEC 60669-1:1998/AMD1:1999/AMD2:2006
- EN 60669-2-1:2004+A1:2009+A12:2010,
- EN 60669-1:2018,EN 62311:2008
RoHS Standard
- 2011/65/EU,(EU) 2015/863
Radio Equipment (RED)
- Complies with 2014/53/EU Directive
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for a separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorization and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorized service center, or local authorities.
EU DECLARATION OF CONFORMITY
Witty, s.r.o declares that the radio equipment type E3W401, E3W403, LZW33,
SHW83, and BAW542 is in compliance with EU directives. The full text of the EU
declaration of conformity is available at the following internet address:
teslasmart.com/declaration.
- Connectivity: Bluetooth, Wi-Fi 2.4 GHz
- Frequency band Wi-Fi: 2.412 – 2.484 GHz
- Frequency band Bluetooth: 2.400 GHz – 2,4835 GHz
- Max. radio-frequency power (EIRP): < 20 dBm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>