TechToy 128131 Smart Bulb RGB 11W E27 Instruction Manual
- June 3, 2024
- TechToy
Table of Contents
TechToy 128131 Smart Bulb RGB 11W E27 Instruction Manual
Tech Toy smart light with Zig Bee connection
Instructions for use
The bulb can be used through the “Tesla Smart” app.
You can set the light up in the app, creating various scenarios and schedules.
Information about the “Tesla Smart” app
Download the free “Tesla Smart” app for Android or iOS. Systems requirements
for app use:
- iOS 8.0 or newer
- Android 4.4 or newer
Use and connection
Download and install the „Tesla Smart“ app from the Apple App Store or Google
Play on your device.
You can get a direct link to download the app by scanning the QR code below.
The supplied bulb can be inserted into various fittings, e.g. into a ceiling light, free-standing lamp or table lamp. It is necessary that each of these flight fittings has a suitable socket.
- Switch off the lights and disconnect from the mains power (if possible). and/or turn off the room’s fuses in the fuse box.
- If necessary, let the previously inserted bulb cool down.
- Remove the old bulb and screw the new bulb into the fitting.
- Plug the light back into the mains power and/or switch the building’s fuse back on and set the switch to the on position.
Open the “Tesla Smart app“.
Create a new account or log in to your existing account.
To connect, you must have a properly configured Tesla Smart ZigBee Hub.
Screw the bulb into the fitting and turn on the power. Make sure the bulb is
in pairing mode (when switched on, the bulb will cycle through its colours or
flash briefly)
Open the Tesla Smart ZigBee Hub in the app and click on: „Add a sub-device“.
Confirm pairing and wait for completion of configuration.
Now the system can be configured and shared with family and friends. You can
also use voice assistants such as Amazon Alexa or Google Assistant to control
the light.
Connecting a voice assistant
Select the unit to which you want to connect the voice assistant.
Click on the pen symbol to view information about the unit.
Select the voice assistant that you want to connect.
Safety warning
This product may only be opened by an authorised person – risk of electric
shock!
In case of trouble, unplug the power cable from the power supply.
Read the instructions carefully before use. Retain these instructions for
possible future use.
Only use the device for the intended purpose.
Do not use the device if any part of it is damaged.
If the device is damaged, it must be replaced immediately.
The device is intended for indoor use only. Do not use the device outside. Do
not expose the product to water or moisture.
Do not touch the device with wet hands.
Make sure the bulb matches the lamp fitting.
Technical specifications
- Power/Light output.
- Colour temperature: 2 200 K – 6 500 K + RGB
- Power supply: 220-240 V AC / 50/60 Hz
- Radio connection ZigBee EEE 802.11b/g/n <20 dBm
- Operating temperature: -20 °C – +50 °C
- Radio range (max): 45 m outside
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/ EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Witty, s.r.o declares that the radio equipment type A60-PA-ZBLIC-TY- RGBCW y1 , C37-PA-ZBLIC-TY-RGBCW y2, GU10-PA-ZBLIC-TY-RGBCW y3 is in compliance with 2014/53/ UE directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc.
Connectivity: ZigBee EEE 802.11b/g/n
Frequency band: 2.412 – 2.472 MHz
Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer
Witty, s.r.o.
Průmyslová 1472/11,
102 00 Praha 15
www.wittytrade.cz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>