Ningbo Cadysun Lighting Technology GC236759 Down Light User Manual

Ningbo Cadysun Lighting Technology GC236759 Down Light

Easy to install

Recessed cans are required, and can’t be installed directly on the ceiling.

WARNING

1. Ensure this manual is provided to the installers and users.
2. Cut off the power before installation or maintenance.
3. This luminaire is used only for inner room lighting, not allowed to use in high temperature and high humidity places.

CAUTION

1. Risk of injury
2. The luminaire may fall down if not installed properly, follow installation instructions.
3. Wear safety glasses and proper aid during installation and maintenance.

Smart Light Connection

1. Before installing the smart light, make sure you have a router that can access the internet successfully, the WiFi router must switch to 2.4Ghz mode. Please turn on WiFi and Bluetooth on your phone or tablet.
2. There are three methods to connect, EZ mode(Default), AP mode, and Bluetooth. It is usually successful to follow the EZ mode with the help of enabling the device’s Bluetooth function. 3. If not, then try the AP mode.

Default mode: Wifi Quick pairing with help of Bluetooth

• Step1: Download the smart life app?
  Android devices scan the QR code and download the smart life app.l0S search ‘smart life’ in-app store. Install the APP and Register an account. Smart life

• Step2: How to make the light blink rapidly?
  power on the light(>10s) DPower off(2s)->Turn on(<1s)->off(2s)->on(<1s)->off (2s)->on (Wait for 5S) Then the light will rapidly flash (On and off twice per second) if not, please try again, go on step 2 as long as the light is quickly flashing.

• Step3: How to add the smart light in the app?

1. App-installed devices connect to Wi-Fi and enable Bluetooth and location permissions.
2. When the light is in pairing status (quick flashing), click”+” on the top right corner of the smart life app, tap in ordered Manually->Lighting->Light Source (BLE+Wi-Fi).
3. Make sure the light is quick flashing.
4. Choose the local WiFi and enter the WiFi password, click ‘Next’, then add the light accordingly.
5. You can rename the device as you want and control it on the app.

AP mode

Set App to pairing status, please choose ‘AP mode’ on the top right corner. Follow the prompts:

1. Power on light(>10s) 2Power off(>2s)->Turn on(<1s)->off(>2s)->on(<1s)->of(2s) ->on, after the flash is quickly flashing(Light on and off twice per second), the continue, power off(>2s)->Turn on(<1s)->off 2s)-on(<1s)->off{>2s)- on (Wait for5S) 3Then the light is slowly flashing (Light on and off once per second).
2. Bluetooth connection: OMake sure your mobile phone/tablet has connected to a 2.4 Ghz WIFI router and the device’s Bluetooth is enabled.
3. Make sure the light is flickering.
4. When you open the ‘Smart Life’ app, the ‘adding device window will pop up, and add the device accordingly. If the device adding window does not pop up, click the ‘+’ on the top right corner of the App to add the device.

FAQs

Q: How to investigate problems if can not connect the smart light?

• A.Please check if the light is powered on properly.
• B. Check if the phone is connected to WIFI and if your light is connected to the same WIFl as your phone.
• C.Ensure the WIFl can access the internet, and only 2.4g WIFI is supported.
• D.Check if the light is rapidly flashing(on 0.5s and off 0.5s) Before you start step3.
• E.Make sure the WiFi password entered in App is correct when adding a device.
• F.Please do not use light outside the WiFi range and metal containers that can block WIFI signals.

Q: How to reset the light?

• A.lf the light doesn’t have installed. Turn on(<1s)–>off 2s)0n(<1s)–>0ff(>2s)—>on(Wait for 5S) And then the light will rapidly flash(2 times per second).
• B.lf the light have installed. On the page” device details”click remove device” after 5 seconds the light will flash.

How to connect smart light to Amazon Alexa

1. You can learn the detailed instruction on the “me->More Services” Page of’Smart life”APP
2. In the Third-party Access Service,Tap Alexa.
3. Tap’link with Account password”
4. there is detailed connection courses.

How to connect smart light to Google Assistant

1. You can learn the detailed instruction on the “me->More Services Page of’Smart life”APP.
2. .In the Third-party Access Service, Tap the Google Assistant, Tap the view more ways to link’.
3. Tap”link with Account password”
4. There are detailed connection course.

Instructions

The product has three years warranty under the condition that all the operations are strictly followed as per the instructions. And the following situations are not covered by the warranty:

1. Any alterations cut or illegible handwriting on the purchase tags or product instructions.
2. Malfunction caused by damage, incorrect connection, or misusage.
3. Adverse phenomena caused by extreme environment rather than the inherent causes of this product (e.g. lighting, flood,.fire, etc)
4. The product shell has been opened or disassembled.
5. Improper use, maintenance, and storage caused by non-conformity with product specifications (such as moisture and corrosion).
6. Product appearance deformation, damage, or any other Ianink Uth Account password

Warning

1. The light is limited to indoor use only, do not use in humid and high-temperature environments.
2. Do not touch the product when it is working due to the potential high temperature.
3. Do not use the product in the confined space of metal materials. otherwise, it can not be connected.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>