Luzerne Trading 870623 Bluetooth Speaker with Light User Manual

Trading 870623 Bluetooth Speaker with Light
User Manual

Notice:
Please read user manual carefully and keep it for your records

Notice for Use

1. For the first use, please charge the battery first. Do not play music while charging.
2. Please use a certified DC 5V cable for charging.
3. When music is played, if the sound is intermittent, it may be lack power, please charge it first.
4. Active the Bluetooth feature on the phone, laptops, or tablets, and set the device to search for wireless devices.

Specification

Material:ABS
Bluetooth version: 5.0
Bluetooth distance: 10M
Rechargeable battery: 1200mAh
Speaker power: 23W
Function: FM/USB/BT/TF/AUX /Handsfree /Led/TWS
Dimension: 8080*270mm
Product N.W: 503g

Includes
1Micro USB charging cable
1User Manual
1*Handle

Functional buttons:

⑤Volume down/Previous song

ON/OFF Button

Long press to turn on/off the speaker.
When you turn on the device, a sound will indicate “Bluetooth mode”. Activate the  Bluetooth feature on your phone, and set the phone to search for Bluetooth device  “AS623BT”.
Short press to change the lights mode, total 2 kinds of lights modes. Short press in sequence until finished, and the lights will turn off.

M Button

Short press to switch among BT, FM, USB Drive, TF Card, and Aux-in mode.
Long press to connect/disconnect TWS.

TWS Function(need 2pcs speakers)

Prepare 2pcs speakers and turn them on, long-press either M button of the 2 speakers to connect TWS. When you hear the prompt tone, that means the TWS connection is successful. At this time, your phone will only show one Bluetooth name, pair it,then you can hear two speakers playing music at the same time.
Long press again to disconnect TWS.

Play/Pause Button

Click to pause or play music; Double click in a short time to redial the last number.
For incoming calls, click to answer the call, click again to hang up the call, and double-click to reject the phone call.

Next Music/Increase Volume Button

Short press to change to the next music
Long press to increase the volume

Previous Music/Decrease Volume Button

Short press to change to previous music
Long press to decrease the volume

USB Reading/TF Card Reading

Insert the USB drive/TF card into the speaker to play MP3 files automatically, to change to previous/next music, and adjust the volume by following the speaker buttons.

Aux-in Mode

Plug a 3.5mm cable to the AUX hole, and connect the other end of the 3.5mm cable to your music device such as a mobile/MP3/PC. There will be a voice prompt when the  AUX mode connection is successful.

Charging

Connect the small end of the Micro USB charging cable (included) to the Micro USB port located on the back of the speaker. Connect the larger end of the cable to your computer’s USB port or an AC adaptor(not included). The LED indicator will turn red while charging. Once fully charged, the red LED will turn off.

Safety instructions

Do not disassemble, throw away or damage this Product. Consult your local waste collection agency for proper disposal or recycling methods.
This product is not a toy. Use extra caution while children are using this product.
Keep the wireless Speaker away from direct sunlight, fire, and high voltage equipment. Do not store the Wireless Speaker inside a car during hot weather.
Remember, a closed car acts as a greenhouse allowing the inside temperature to possibly reach over 200 degrees.
The device may become warm while charging.
Be assured to turn the product completely off when plugging and unplugging into an outlet.
Damage, shock, and/or injury can occur if this warning is not heeded properly.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

References

• realtime.at - Domain catched
• successful.at - This website is for sale! - successful Resources and Information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>