Meiyou 8805 Bluetooth Glasses User Manual
- June 5, 2024
- Meiyou
Table of Contents
BTglasses
8805 Bluetooth Glasses
User Manual
SPECIFICATION
lf the phone can’ male or receive calls. check the Bluetooth of the phone to
see whether it has turned on its audio there’s something wrong with the keypad
of the phone, check the Bluetooth on the phone to s whether it has turned off
the input equipment
3lfthe Bluetooth cannot be charged. check the data able porand charger pug to
see if they are connected properly (phone charger shares a port with computer)
Caution
- Please use this product according to local laws and regulations when using this product during a drive or a ride please make sure you are sufficiently focused in order to safeguard your safety
- To ensure your safety, please don’t listen to loud music or use two headsets at the same time in places where your safety may be at risk
- Do allow children to play with this product as the small parts may scratch then
- Please pay attention to the tips in some specific arts hie a swimming pool or gs station
- Do not dismantle or damage the butt.in battery
- Please charge it within 30 if you donate it for a long tire
Re-calling: Press Key IM twice
Charging alert: Insert it into a US8 port for charging with the voltage of 5V
and its height being red (charging current should not exceed LA, ad 500mA is
recommended) Charging time: about 2 and a half hours
Btglassestf
Press and hold the power on key for 3 seconds to enter Bluetooth mode, and
double-click (power on the key) to enter mode, Three dick (power on the key)
to enter FM mode, nd short press (power on the key) to Search for radio
station, Short press the volume key to change channels, and long press to
increase or decrease the volume
Language Mode
Under ON state, double click the middle button to switch between Chinese and
English. (If the glasses have connected with the mobile phone, please turn off
Bluetooth before switching the language)
Common troubleshooting
- The Bluetooth cannot be connected to the phone, check the Bluetooth to see whether it has entered the matching mode (red and green lights alternate in a flashing) and heck if the Bluetooth on the phone is turned on
- the phone can’t play music, check the Bluetooth on the phone to see whether it has turned on the media audio
Switch on or off
- Press and hold key for4 seconds to switch on The green light will flash, and then the red and green lights will alternate inflating which indicates that it has entered into the matching mode
- Press and hold Key for4 seconds to switch off The red light wilt flash
Matching and automatic reconnection
Matching Press and hold Key for 4 seconds. When the red and green lights
alternate in flashing it has entered into the matching mode urn on the mobile
phone or other devices that are equipped with Bluetooth play function and
call function switch the Bluetooth to sech foe devices with Bluetooth
function, and then select 8glasses TF i the search result After successfully
matching rt can play music and be used for aang
Volume control
Volume Press and hold key
Volume Press and hold key
Music keys instruction
Pf Preer@shorty
Lt re Pr ory
Not.le4%4hoy
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The device has been
evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>