Seuic HS200 Handheld 2D Image Barcode Scanner User Guide

Seuic HS200 Handheld 2D Image Barcode Scanner

Features of wireless scanner

Definition of indicators

• Green LED: Successful decoding indicator
• Red LED: Failed decoding indicator (off by default)
• Yellow LED: Failed communication

Battery replacement

Notes:

1. It is recommended to fully charge the battery before use.
2. When the battery power is low, please charge or replace the battery in time.

Loading direction of scanner onto cradle

Connection of the cradle to external power supply

Connected to external power supply
Note: When it is connected with the USB cable to the power supply, the scanner can be charged; if fast charging is required, it is recommended to connect it with an external power supply.

Cable connection of the cradle

Notes:

1. The USB keyboard transmission mode (HID) is set by default in factory. If the default value (*) is not the desirable value, you can scan the corresponding setting code in “3) Communication interface settings” in the “Quick Setting Code of the Wireless Scanner” below to change it.
2. If it is connected via the RS232 cable, please scan the RS232 serial port setting code.

Quick setting code of wireless scanner

1. Restoring the factory settings (The USB keyboard mode (HID) is set for communication by default in factory)

2. Displaying the product information

3. Communication interface settings

4. Baud rate of RS232 serial port

5. Adding enter/line feed suffix

6. Barcode reading setting

7. Inverse color barcode reading mode

8. Trigger working mode (When the wireless scanner is always on or in auto-sensing mode, the power will be consumed fast, so such modes shall be triggered with caution)

9. Multiple barcode reading mode

10. Centering setting 

11. Lighting system setting 

12. Pre-aim mode setting
    After this mode is enabled, if the scanner is in the standby state after being turned on, the aiming light will be always on. It is convenient for users to align the barcode in advance to complete fast and accurate scanning.

13. Vibrator setting

14. Bluetooth pairing connection mode setting

15. Transmission mode setting

16. Other settings 

Description of buzzer status

Status of LED indicators

Power indicator
Power indicator in green| 51-100% power
Power indicator in yellow| 21-50% power
Power indicator in red, indicating low battery

power

| 0-20% power
Flash in blue (fast/fast/slow)| Paging status
Press and hold the scan button for 3 seconds, and the indicator will show the battery power; it will

automatically go off within 5 seconds;

Scan indicator
Off| The barcode scanner is turned on and ready to

scan, but the scanner is not powered

Flashing in green| The barcode has been successfully decoded
Red| Transmission error (off by default)
Yellow| Communication failure

Troubleshooting

The wireless scanner does not work

The scanner is not powered| Check if the battery power is low
The wireless scanner successfully decodes the barcode, but fails to upload the data to the

host

The host interface is incorrectly configured| Scan the appropriate host interface setting code
The cable is loose| Make sure that all cable are securely connected
The wireless scanner is not paired with the

cradle

| Scan the cradle pairing setting code to ensure

they are paired and connected properly

The wireless scanner cannot read the barcode

Corresponding code system is not enabled| Enable the corresponding code system
The barcode is not readable| Make sure the barcode is intact; try to scan the

same type of barcode for test

The distance between the scanner and the

barcode is incorrect

| Adjust the reading distance of the scanner

Precautions for safety

• Do not look directly at the laser scanning head during scanning to avoid accidental injury.
• Please use the battery and power adapter specified by Jiangsu Seuic Technology Co., Ltd. to prevent explosion or damage to the equipment.
• Do not short-circuit the battery and the power adapter, or touch the battery with metal or other conductive objects.
• Do not immerse the battery in or contact with water or other liquids; do not expose the battery to open flames, sources of explosion, or other hazardous sources such as microwave ovens and dryers.
• Do not immerse the USB cable in water, and keep it away from fire.
• If you suspect that the device or battery is damaged, please contact your supplier for help.

Technical Support

Please log onto the official website of the product www.chinaautoid.com to learn about the detailed user manual of this product and download the supporting software and development kits of related functions to help you make better use of this machine.
2021 SEUIC Company. All rights reserved.
Without consent of SEUIC, it is strictly prohibited to copy, spread, distribute and store any information in this document in any form.

SEUIC Technologies Co,. Ltd.
Add.: NO.15 Xinghuo Road, Nanjing New & High Technology Industry Development Zone Nanjing, 210061
P.O.: 210061
Tel.: 86-25-52261298
Fax: 86-25-52268995
Enterprise website: www.Seuic.com
Product website: www.ChinaAUTOID.com
Service hotline: 400-677-0876
E-mail for services: AUTOID@seuic.com 

FCC STATEMENT

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with part 15 of the FCC rules ，Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
• This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

MANUFACTURER: SEUIC Technologies Co,. Ltd.
ADDRESS: NO.15 Xinghuo Road, Nanjing New & High Technology
Industry Development Zone Nanjing, 210061

FCC ID: 2AC68-HS220GHD203B

References

• 手持终端,手持机,工业PDA,固定式读码器,工业平板电脑,超高频RFID读写器,工业扫描枪,Seuic东集官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>