Shanghai Dewav Iot Technology V5X4G Real-Time Temperature Logger User Manual
- June 5, 2024
- Shanghai Dewav Iot Technology
Table of Contents
Shanghai Dewav Iot Technology V5X4G Real-Time Temperature Logger
Display Instruction
- Start: Long press the “Start/Stop” button till “REC” has been showing on the LCD interface, and the device is ready to monitor. At the same time, the record quantity also will be showed on the LCD interface.
- Stop Long press the “Start/Stop” button till “REC” disappear from the LCD interface, and the device has been stopped.
- Check data: Short press the “Data” button, to show some information:
- MAX temperature value
- MIN temperature value
Mode Switch[](https://manuals.plus/wp-content/uploads/2022/07/Shanghai-
Dewav-Iot-Technology-V5X4G-Real-Time-Temperature-Logger-FIG-5.png)
- Long press the “Mode” button, to enter flight mode:
- In-flight mode, the logger only records data and doesn’t send data to the platform.
- LCD will be shut down, and display nothing.
- Long press the “Mode” button again, to quit flight mode:
- Data report, LCD show, that everything is back to normal.
Usage scenarios
Put the device in the container with the goods together.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm from your
body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>