ASUS RT-AX86U Wireless-AX5700 Dual-band Gigabit Router User Guide
- June 5, 2024
- Asus
Table of Contents
ASUS RT-AX86U Wireless-AX5700 Dual-band Gigabit Router
Package contents
☑ RT-AX86U Wireless Router
☑ Network cable (RJ-45)
☑ AC adapter
☑ Quick Start Guide
A quick look at RT-AX86U
① | WPS LED |
---|---|
② | LAN 1~4 LEDs |
③ | WAN (Internet) LED |
④ | 2.5G LED |
⑤ | 2.4GHz LED |
⑥ | 5GHz LED |
⑦ | Power LED |
⑧ | LED on/off button |
⑨ | Power (DC-IN) port |
⑩ | Power button |
⑪ | Reset button |
⑫ | USB 3.2 Gen 1 ports |
⑬ | 2.5G port |
⑭ | WAN (Internet) port |
⑮ | LAN 1 ~ 4 ports |
⑯ | WPS button |
Position your wireless router
For optimal wireless transmission between the wireless router and connected wireless devices, ensure that you:
- Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
- Keep the wireless router away from metal obstructions and away from direct sunlight.
- Keep the wireless router away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal interference or loss.
- Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates.
- Orient the antennas as shown in the drawing below.
NOTES:
- Use only the adapter that came with your package. Using other adapters may damage the device.
- Specifications:
DC Power adapter| DC Output: +19V with 2.37A current
DC Output: +19.5V with 2.31A current
---|---
Operating Temperature| 0~40ºC| Storage| 0~70ºC
Operating Humidity| 50~90%| Storage| 20~90%
Preparing your modem
- Unplug the power cable/DSL modem. If it has a battery backup, remove the battery.
NOTE : If you are using DSL for Internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure the router.
-
Connect your modem to the router with the bundled network cable.
-
Power on your cable/DSL modem.
-
Check your cable/DSL modem LED lights to ensure the connection is active.
Setting up your RT-AX86U
You can set up your router via wired or wireless connection.
A. Wired connection
-
Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port on your router.
-
The web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
-
Set up a password for your router to prevent unauthorized access.
B. Wireless connection
-
Plug your router into a power outlet and power it on.
-
Connect to the network with SSID shown on the product label on the back side of the router. For better network security, change to a unique SSID and assign a password.
Wi-Fi Name (SSID): ASUS_XX
-
XX refers to the last two digits of 2.4GHz MAC address. You can find it on the label on the back of your router.
- You can choose either the web GUI or ASUS Router app to set up your router.
a. Web GUI Setup
• Once connected, the web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
• Set up a password for your router to prevent unauthorized access.
b. App Setup| |
---|---|---
|
- You can choose either the web GUI or ASUS Router app to set up your router.
Download ASUS Router App to set up your router via your mobile devices.
• Turn onWi-Fi on your mobile devices and connect to yourrouter’s network.
• Follow ASUS Router App setup instructionsto complete the setup.
Remembering your wireless router settings
- Remember your wireless settings as you complete the router setup.
Router Name:| Password:
---|---
2.4 GHz network SSID:| Password:
5GHz network SSID:| Password:
FAQ
- Where can I find more information about the wireless router?
• Online FAQ site: https://www.asus.com/support/faq
• Technical support site: https://www.asus.com/support
• Customer hotline: refer to the Support Hotline section in this Quick Start Guide
• You can get the user manual online at https://www.asus.com/support
NOTES:
- UK support e-mail: network_support_uk@asus.com
- For more information, visit the ASUS support site at: https://www.asus.com/support/
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirement,
please follow operation instruction as documented in this manual. This device
is restricted for indoor use.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation,
Science and Economic Development Canada radio frequency exposure limits.
The ASUS Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This equipment should be installed and operated with a minimum distance of 31
cm between the radiator any part of your body.
This device has been certified for use in Canada. Status of the listing in the
Innovation, Science and Economic Development Canada’s REL (Radio
Equipment List) can be found at the following web address:
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the
following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
This radio transmitter [3568A-RTAXI600] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the
e.i.r.p. limit.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall
be such that the equipment still complies with the e.i.r.p. limits specified
for point-to-point and non-point-to-point operation as appropriate.
For indoor use only.
Precautions for the use of the device
a. Pay particular attention to the personal safety when use this device in
airports, hospitals, gas stations and professional garages.
b. Medical device interference: Maintain a minimum distance of at least 15 cm
(6 inches) between implanted medical devices and ASUS products in order to
reduce the risk of interference.
c. Kindly use ASUS products in good reception conditions in order to minimize
the radiation’s level.
d. Keep the device away from pregnant women and the lower abdomen of the
teenager.
India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1 % by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.
CE statement
Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. Full text of EU declaration of conformity is available at
https://www.asus.com/Networking/RT-AX86U/HelpDesk/.
Declaration of Conformity for Ecodesign directive 2009/125/EC
Testing for eco-design requirements according to (EC) No 1275/2008 and (EU) No
801/2013 has been conducted. When the device is in Networked Standby Mode, its
I/O and network interface are in sleep mode and may not work properly. To wake
up the device, press the Wi-Fi on/off, LED on/off, reset, or WPS button.
This equipment complies with EU radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body.
All operational modes:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20),
802.11ac (VHT40), 802.11ax (HE20), 802.11ax (HE40) 5GHz: 802.11a, 802.11n
(HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80),
802.11ac (VHT160), 802.11ax (HE20), 802.11ax (HE40), 802.11ax (HE80), 802.11ax
(HE160)
The frequency, channel and the maximum transmitted power in EU are listed
below:
2400-2483.5MHz(1-13): OFDM: 19.97dBm(99.3mW); CCK: 19.73dBm(93.9mW)
5150-5250MHz (36-48): 22.98dBm(198mW)
5250-5350MHz (52-64): 22.99dBm(199mW)
5470-5725MHz (100-140): 29.98dBm(995mW)
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range.
The adapter shall be installed near the equipment and shall be easily
accessible.
Safety Notices
- Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
- Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
- DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
- DO NOT place or drop objects on top and do not shove any foreign objects into the product.
- DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
- DO NOT cover the vents on the product to prevent the system from getting overheated.
- DO NOT use damaged power cords, accessories, or other peripherals.
- If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
- To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
- DO NOT mount this equipment higher than 2 meters.
References
- ASUS Global
- 華碩永續網站, 華碩永續目標
- ASUS Global
- ASUS Global
- Supporto ufficiale | ASUS Italia
- ASUS WiFi Routers|WiFi Routers|ASUS Global
- ZenWiFi WiFi Systems|Whole Home Mesh WiFi System|ASUS Global
- RT-AX86 Series(RT-AX86U/RT-AX86S)
- RT-AX86 Series(RT-AX86U/RT-AX86S)
- Official Support | ASUS Global
- Official Support | ASUS Global
- Radio equipment list (REL)
- 403 Forbidden
- ASUS Global
- ASUS WiFi Routers|WiFi Routers|ASUS Global
- All series|WiFi 6|ASUS Global
- RT-AX86 Series(RT-AX86U/RT-AX86S)
- RT-AX86 Series(RT-AX86U/RT-AX86S)
- Official Support | ASUS Global
- Official Support | ASUS Global
- 403 Forbidden
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>