Worallymy F1 True Wireless Stereo Earphone User Guide

Worallymy F1 True Wireless Stereo Earphone

Wireless 5.0More compatible

Compatible with Apple IOS and Android smartphones

One-button control

Easy pairing connection

1. The earphones taken out of the package and placed in the charging compartmen .tThe earphone is charged and activated,blue light on

2. The earphone is taken out from the charging compartment, the LR earphone ashens Blue/Red, the R side fiashes and the L side light is off, that means the pairing is successful.

3. Open the phone wireless Search wireless name:F1 Click Connect
   Note :lf the left and right earphones are not connected within 5 minutes, the earphone will automatically shut down, if you need to use them,pleass restart them

4. After the headset is used,put it directly into the charging box and the headset turns off.
   To use the headset again, simply remove the headset from the charging box.

5. The headset will automatically complete the binaural pairing and connect the phone.

Charging schematic

Charging box

• When charging: White light flashing
• Full power: white light is always on
• Charging time: about 1 hour
• Charge the earphone in the charging compartment.
• The blue light is on.
• The earphone is fully charged and the light goes out.
• The charging compartment tislow and the blue light flashes out.

Headset

When charging:the blue light is always on Full power: the blue light is off
Charging time: about 1 hour

Note :When charging the product charging box, please use our standard charging cable,5V/1A charger. Special Note: Do not use more than 5V/1A fast charge charger, so as not to damage the charging box!

Wear schematic

**Product specifications

**

• Product Name: F1
• Wireless connection name: F1
• Wireless version:.50
• Prwer lnput: DC 5V
• Headset Battery capacity: 3.7V/40mAh
• Call/ play time: about 5 hours(Hours) Charging time: about 60 minute(Min) Charge box battey capacity: 3.7V/ 300 mAh Support agreement: HSP / HFP / A2DP / AVRCP Sensitivity: 1205dB
• Frequency response range 20:-20000Hz Impedance: 32 Ω
  FCC ID: 2A7NUBWGH0701

FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
① this device may not cause harmful interference,and
② this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  Changes or modifications not expresslyapproved by the party responsible for compliance could void the user’s authority tooperate the equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>