ZXLGYG

ZXLGYG Portable Speaker, Crystal Clear Stereo Sound

Specifications

• SPEAKER TYPE: Outdoor
• BRAND: ZXLGYG
• MOUNTING TYPE: Freestanding
• AUDIO OUTPUT MODE: Stereo
• POWER SOURCE: Battery Powered
• SIZE: 4.74.39.6 inch
• BATTERY: 1200mAh
• OUTPUT POWER: 2*3W
• HORN SIZE: 3 inch
• PLAYTIME: about 12 hours

Introduction

With two drivers, the speaker can provide you with clear treble and powerful bass, allowing you to enjoy thrilling music. You can place your phone on the speaker’s built-in phone holder to effortlessly view the lyrics while listening to music. Your party will be more thrilling with the flashing of two stunning LED lights in time to the music. You could take the speaker anyplace you went, including outdoor parties, the beach, the gym, and other places, if it had a carrying handle. The 1200Mah battery can play music for up to 12 hours after being fully charged (depending on the volume)

How to use

You can use the speaker by connecting to Bluetooth/MP3 or USB.

Bluetooth

• Turn the speaker on by pushing the button on.
• You speaker is on and ready to be paired.
• Now go to Settings in your phone.
• Click on the name of the device.
• Now play some music from your phone and you will hear it on the speaker.

MP3

• Insert the SD card into the speaker’s slot and the audio will be automatically played which is in the SD card.
• You can change the song by the controls on the top of the speaker.

**USB**

• Insert the USB into the speaker’s slot and the audio will be automatically played which is in the USB.
• You can change the song by the controls on the top of the speaker.

Frequently Asked Questions

• What does the Bluetooth speaker’s M button do?
  Your speaker’s master power switch is located here. Mode Pinch M. Press to choose between Bluetooth, AUX, and Micro SD.

• What does my speaker’s M button do?
  To go from headphone to AUX mode, press and hold the M button. You may link your speaker to outside media players here.

• What distinguishes a Bluetooth speaker from a wireless speaker?
  Bluetooth and WiFi are the two available wireless technologies. Your home network is connected through WiFi speakers. They often need an outlet because the majority run on AC power. Bluetooth speakers connect straight to a computer or phone.

• How does a speaker function?
  Electrical energy is transformed into mechanical energy by speakers (motion). Air is compressed by the mechanical energy, which then transforms the motion into sound energy or sound pressure level (SPL). A magnetic field is created when an electric current is sent through a coil of wire.

• How does audio on Bluetooth function?
  When coupled with Bluetooth-enabled digital audio equipment, Bluetooth speakers may wirelessly receive digital audio over the Bluetooth protocol. The same as normal speakers, BT speakers take digital audio through BT wireless transmission, convert it to analogue audio, amplify it, and then transform it into sound.

• What radio stations have Bluetooth speakers? How can I locate them?
  Today, several Bluetooth speakers have FM tuners. Pressing the Function button causes the Bluetooth speaker to switch between the AUX, Bluetooth, and FM tuner modes. The Volume up and down buttons may be used to navigate the radio stations after the FM tuner mode has been activated.

• A boombox speaker is what?
  An amplifier and two or more integrated loudspeakers are used to transmit sound. A boombox is a device that can typically play recorded music and receive radio stations (usually cassettes or CDs usually at a high volume). Many versions also include the ability to record audio from the radio and other sources onto cassette cassettes.

• Is Bluetooth audio-wise superior to Wi-Fi?
  Less audio compression is used in Bluetooth advances like AptX, although they are not lossless. On the other hand, WiFi can transmit audio wirelessly while maintaining the integrity of recordings. If you have a recording with the complete spectrum of audio, your speakers will faithfully reproduce that information.

• How can my speakers be made louder?
  Locate the device’s equalization settings by going to your Android phone’s settings and choosing “Sounds and Vibration.” From this point, you may change several settings to obtain a louder or more appropriate sound.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>