Cloudbird Innovations A1002 Smart Optical Earwax Removal User Manual

June 5, 2024
Cloudbird Innovations

Cloudbird Innovations A1002 Smart Optical Earwax Removal User Manual

Product Overview

What’s in the Box:

  • Smart Optimal Earwax Removal
    What's in the Box

  • Disposable Ear Scoop

  • Disposable Ear Fins

  • Ear Massage Kit

  • USB-C Charging Cable

  • Cleaning Tool

  • User Manual

Product Anatomy

Product Anatomy

LED Indication

Status light Status
Flashing blue Standby/ Charging
Solid blue Connect to the phone / Fully charged
Flashing red Low power
Off Power off

Getting Started

Download the App

Download the Cloudbird app from the App Store (iOS devices) or Google Play (Android devices).

Put on the ear pick

Put on the ear pick

Use the gentle, flexible scoop to spoon out earwax or ear debris. The scoop is small enough for even the smallest ear canals.

The ear fin is perfect for safely scratching that irritating ear itch while exfoliating the skin cells of the outer ear canal.

Turn on your earwax removal

Turn on your earwax removal

Remove the device cover, and wait for the lens supplementary light to turn on.
Follow the in-app instructions to complete the Wi-Fi connection. You then will be able to control the earwax removal via this app.

Direction

Direction

For Cleaning the “ENTRANCE ONLY” to the Ear Canal and the
Outer Ear.

 Do Not Enter the Ear Canal beyond the indicated stop-line in the illustration.

When using earwax removal for the firs1 time, use them LIGHTLY & as SOFTLY as possible until Familiar with Their Use! Use the “Spoon End” to “Gently” Scoop Earwax or Ear Debris from the Entrance only to the Ear Canal and the outer surfaces of the ear.

The opposite flexible “Finned End” can be used to Scrape Clean Exfoliate the outer skin surfaces of the ear & when needed deliver and Relief from Ear Itching ! After one-time use, dispose of properly. For an Added “Feeling of comfort” Dip In Warm Water Before Use.

Note: Even though this product has been designed to be more flexible and collapsible than the common cotton swab, if misused this product is not injury free. Directions and warnings must be observed!

Warning

  • Do Not Enter the Ear Canal beyond the indicated stop-line in the illustration.
  • People with Sensitive Ears should use Caution.
  • As with all common cotton Swabs observe the following: If a present Ear Condition Exists , Do Not Use this or any other like product and seek medical attention. (Use of this or any other like product may aggravate a present condition.)
  • Use “alone”to prevent injury by accidental bumping from others. Use only in a Secure-Safe Non-Moving environment
  • If pain or discomfon results, discontinue use. Misuse of this or any cotton swab product could cause serious injury whiCh could include pain, infection or loss of hearing. Use only as directed.
  • This product is for one time use. Any attempt to use this product more than one time may result in serious damage to the ear and may result in the need for medical care if the product becomes damaged or breaks due to excessive cleaning or overuse.
  • Keep out of reach of children.

Ear Massage Kit

Crane feather

Massage the outer ear and relieve the nerve system by spinning the crane feather.

Goose feather

Massage the ear canal and relieve the nerve system by spinning the goose feather.

Horsetail hair

Stimulate the eardrum by spinning the horsetail hair.

Note: Clean the feathers by medicinal alcohol or water after use.

Specifications

P«xluct Name Sman Optical Earwax Removal
Model e5
Network standard IEEE 802.11b/g/n
Antenna Internal antenna
Working frequency 24GM
Image transmission rate 30fps
Image sensor CMOS
Working temperature 0°C — 40 °C
Battery 185mAh
Charging time 50 minutes
Input parameters 5V 0.3A
Rated power 1.5W
Lens diameter 3.5mm
Optimum focal length 1.5—2cm

Manufacturer

Cloudbird Innovations Limited

Ram1602B, Taohuayuan Science and Technology Innovation Park,
Bao’an District, Shenzhen, China

Notice

This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obliged to take back your old appliance for disposal at least free of charge.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement

Your Smart Optical Ear Wax Removal is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for Smart Optical Ear Wax Removal employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/ kg. Tests for SAR are conducted with the Smart Optical Ear Wax Removal transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the Smart Optical Ear Wax Removal while operating can be well below the maximum value. This is because the Smart Optical Ear Wax Removal is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a Smart Optical Ear Wax Removal model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model Smart Optical Ear Wax Removal when tested for use at the ear is 0.029 W/Kg and when worn on the body, as described in this user guide, is 0.029W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: 2A676-A1002. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.

CE Statement

  1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
  2. The product shall only be connected to a USB interface of version USB2.0
  3. Operation temperature: 0-40°C
  4. The device complies with RF specifications when the device used at 0.5cm from your body
  5. USB Input:
    Input: DC5V, 0.3A
    Max power
    WiFi: 9.68dBm
    WiFi: 2412MHz-2472MHz,
    WIFI can be used in Europe without restriction.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals