basIP BА-08BD Entrance Panel User Manual
- June 5, 2024
- basIP
Table of Contents
basIP BА-08BD Entrance Panel
Main features
- Panel type: Multi button.
- Camera: 1/4”, adjustable camera angle by 15°.
- Angle: 90° (horizontal).
- Resolution: 1.3 Мp.
- Output video: Half HD (1280 × 720), H.264 Main Profile.
- Night backlight: 6 LEDs.
- Light sensitivity: 0,01 Lux.
- Protection class: IP65.
- IK-code: IK07.
- Working temperature: -40 — +65 °С.
- Power consumption: 5,5 W, in standby — 2,5 W.
- Power supply: +12 V DC, PoE.
- Body: Aluminum.
- Colors: Silver.
- Dimensions for installation: 142 × 245 × 55 mm.
- Size of the panel: 156 × 270 × 50 mm.
- Installation: Flush, surface with BR-BA bracket.
ENTRANCE PANEL
Device description
BAS-IP BA-08BD is 8-button panel incorporating cutting-edge technical features
and stunning design. The BA-08BD supports contactless cards, the new BAS-IP
UKEY application, as well as has a built-in camera, which provides video
output in 720p. resolution. This panel is exceptionally durable, for its
protection class is IP65.
Appearance
- Backlight.
- Loudspeaker.
- Camera.
- Keypad.
- Concierge.
- Reader
Completness check of the product
Before installation of the outdoor panel, it is necessary to check that it is
complete and all components are available.
Outdoor panel kit includes:
- Outdoor panel 1 pc
- Manual 1 pc
- Flush mount bracket 1 pc
- Set of wires with connectors for connection of power supply, V
- lock, and additional modules 1 pc
- Sealing plug 1 pc
- Wrench set screws 1 pc
Electrical connection
After verifying the device’s completeness, you can switch to the outdoor panel connection.
For connection you will need:
An Ethernet UTP CAT5 or higher cable connected to a network switch /
router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard. Power supply at +12 V, 2 amps, if there
is no PoE. You can connect any type of electromechanical or electromagnetic
lock for which the switched current does not exceed 5 Amps.
- Connection scheme of electromechanical lock using external power supply for panel and the lock.
- Connection scheme of electromagnetic lock using external power supply for panel and the lock.
Mechanical mounting
Before installation of the outdoor panel it is necessary to provide a hole or a recess into a wall with dimensions 144×247×56 mm (for flush mount) dimensions of the bracket (mounting box) = 142×245×55 mm. It is also necessary to provide supply of a power cable, additional modules and the local network.
Attention : the hole at the bottom is designed to drain the water. Do not intentionally close it. Also it is necessary to make a drain for water at the bottom of the niche which will serve to divert water out.
Outdoor Panel
Flush Bracket
Warranty
- The warranty card number
- Model name
- Serial number
- Seller name
With following stated terms of warranty is familiar, functional test was performed in my presence: Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from the date of
sale.
- Transportation of product must be in its original packaging or supplied one by the seller.
- The product is accepted in warranty repair only with a properly filled warranty card and the presence of intact stickers or labels.
- The product is accepted for examination in accordance with the cases provided by law, only in the original packaging, in a full complete set, appearance corresponding to the new equipment and presence of all relevant properly filled documents.
- This warranty is in addition to the constitutional and other consumer rights and in no way restrict them.
Terms of warranty
- The warranty card must indicate the name of the model, serial number, purchase date, name of the seller, seller company stamp and the customer’s signature.
- Delivery to the warranty repair is carried out by the buyer himself. Warranty repairs carried out only during the warranty period specified in the warranty card.
- The service center is committed to do everything possible to carry out the repair warranty products, up to 24 working days. The period spent on the restoration of product functionality is added to the warranty period.