Goldlion TB-22 Bluetooth Night Light User Manual
- June 5, 2024
- Goldlion
Table of Contents
TB-22 Bluetooth Night Light
**User Manual
User Manual
Bluetooth night light**
Please read this manual carefully before using the product and keep it properly.
Product Introduction
LED music atmosphere lamp, using bionic modeling design, simple and beautiful appearance, warm luminous effect, with music colorful atmosphere lamp, no video flash, clear and comfortable lighting.
Product Features
- Colorful night light
- Stepless dimming
- Modeling simple
- Flicker Free
- Rechargeable
- Bluetooth
Product Parameters
Product Material: ABS
Product Color: white
Rated Voltage：5V *
Product Power: 10W (12X0.5W+4X0.2W/LED module+Bluetooth module1）
Rated Current：2A **
Battery Category：18650 lithium battery
Battery Capacity：2000mAh
Charging Time：≈5 hours
Discharge Time：3~15hours
Light Source： LED
Color Rendering Index（Ra）:＞80
Working Temperature：-5 ~ +45
Luminous Flux：20LM
Version：V5.0 + BR + EDR
PORFILE：A2DP1.0AVRCP1.5AVDTP1.0AVCTP1.4HFP1.5GAVDP1.0
FREQUENCY RESPONSE: 2402-2480MHZ
Noise ratio： ***RL = 4Ω,Po = 1.0w 72dB
Transmitter frequency range：2402-2480MHz
Transmitter modulation：1-78mhz
Product Weight：≈1045g
Product Size：240130259MM
Packing Size：240130*283MM
Product Parts List
LED Desk Lamp 1
User Manual 1
Product Instructions
-
Connect the USB cable to the power adapter, and connect the other end of the product, the charging indicator light is red, charge the product at the same time, after full off.
-
Press by hand for about 1 second, the night light will turn on and turn on a yellow light, and then press to turn off the night light. Long press this button to adjust the brightness of the light when the night light is on. Press for about 1 second, the colorful night light will turn on and turn on the white light. Press down in turn to light yellow light, red light, green light, deep blue light, light blue light, and pink light respectively. After powdery light, press again to enter the color changing mode, then press the cycle night light, long press to turn off the light and memory the light.
-
This product has Bluetooth audio function. Long press the audio switch to turn on the Bluetooth function. The indicator light at the button lights up and the blue light flashes, at this point, you can use the Blu-ray device to search: “TB-22SBTW HIFI”, and search to the point of connection. When the battery is running out, the speaker will make a “ding ding” sound. At this time, please change as soon as possible, short press the music to pause, and then long press to turn off Bluetooth.
Note: when the product cannot be turned on, it may be out of power. Please charge the product for 10 minutes before turning it on. -
This product has an audio port. Connect one end of the audio cable to the audio port and the other end to the computer /MP3/MP4 and other audio devices. Long press the audio switch to open it.
Notes
Warning:
- The product does not have a waterproof function, do not use it in a wet environment.
- Please do not disassemble the product by yourself.
- To avoid danger, do not cover the product.
- Keep children away from the lamp, this product is not a children’s lamp/toy.
- Cut off the power supply quickly in case of an abnormal phenomenon, and contact the seller.
Note:
-
Suitable for safe use in tropical climate conditions.
-
If the battery is improperly replaced, there may be a risk of explosion.
Only replace the battery with the same type or equivalent type. The battery (battery pack or battery combination) should not be exposed to overheating. -
Power adapters that are CCC certified and meet the standard requirements should be purchased.
-
Only suitable for safe use in areas with an altitude below 2000m.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>