ZACHVO HDP20006A Adjustable Pendant Light Installation Guide
- June 5, 2024
- ZACHVO
Table of Contents
ZACHVO HDP20006A Adjustable Pendant Light
HOW TO USE
INSTALLATION INSTRUCTION
- Electrical appliances must only be connected by competent persons.
- Before commencing installation work disconnect the mains cable from the power supply, removing the fuse or turning switch to OFF”!
- Do not attach lamps to surfaces which are damp, freshly painted, otherwise eletrically conductive.
- Use the subjection system according to the wei ght of the lamp.
- Be sure to al ways use the correct type of bulb. (See information on the label)
- Cleaning is limited to the outer surfaces, shades or protect ive glass, reflectors and covers.
- Do not touch the bulb wi th bare hands. Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.
- If the light is with crystal or glass, please follow below steps. Check the packed bags with numbers then open them. Hang the crystals to the right places according
NOTES
- The symbol indicates that the lamp has an earth terminal. (The earth wire yellow and green )must be connected to the terminal indicated by the symbol.
- Protect ion class This lamp is doubly insulated and must not be connected to and earth wire.
- The symbol-0. 5ME “indicates that the lamp head must be at least ‘0. 5 from the lighted surface.
- The symbol “indicates that luminaire is suitable for use on normally flammable surface.
- The symbol” indicates that luminaire is only suitable for use indoors.
- The below is how fitting wire connect to household circuit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>