BOSCH ART 24 Grass Trimmer Instruction Manual

: June 5, 2024
: Bosch

Table of Contents

BOSCH ART 24 Grass Trimmer
Safety Notes
Operation
Symbols
Intended Use
Technical Data
Noise/Vibration Information
Declaration of Conformity
Mounting and Operation
Troubleshooting
After-sales Service and Application Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH ART 24 Grass Trimmer

BOSCH-ART-24-Gras-Trimmer-
Product

Safety Notes

Warning! Read these instructions carefully, be familiar with the controls and the proper use of the machine. Please keep the instructions safe for later use! Explanation of symbols

General hazard safety alert.
Pay attention that bystanders are not injured by foreign objects thrown from the machine.
Warning: Keep a safe distance from the machine when operating.
Switch off and remove the plug from mains before adjusting, cleaning, or if the cable is entangled and before leaving the garden product unattended for any period. Keep the supply flexible cord away from the cutting line.
Wear eye and ear protection.
Do not work in the rain or leave the trimmer outdoors whilst it is raining.
Beware of thrown or flying objects to bystanders. Warning: Keep a safe distance from the machine when operating.

Operation

This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety. Children should be supervised to ensure that they do not play with the machine.
Never allow children or people unfamiliar with these instructions to use the trimmer. Local regulations may restrict the age of the operator. When not in use, store the trimmer out of reach of children.
Never operate the trimmer with missing or broken guards or shields or without guards or shields in position.
Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use, disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the trimmer if the cord is damaged or worn.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Keep extension cords away from cutting elements.
Before using the machine and after impact, check for signs of wear or damage and repair if necessary.
Never operate the product when you are tired, ill or under the influence of alcohol, drugs, or medicine.
Always wear long heavy trousers, boots, and gloves. Do not wear loose clothing, jewelry, short trousers, sandals, and newer work barefoot.
Wear safety eye protection and ear defenders when operating the machine.
Keep firm footing and balance. Do not overreach.
Never work with this trimmer while people, especially children or pets are nearby.
The operator or user is responsible for accidents or hazards occurring to other people or their property.
Wait until the cutting head has completely stopped before touching it. The head continues to rotate after the trimmer is switched off, the cutting system can cause injury/damage.
Work only in daylight or in good artificial light.
Avoid operating the trimmer in bad weather conditions especially when there is a risk of lightning.
Operating the trimmer in wet grass decreases the efficiency of performance.
Switch off when transporting the trimmer to and from the area to be worked on.
Switch on the trimmer with hands and feet well away from the rotating line.
Do not put hands or feet near the cutting system.
Never fit metal cutting elements to this trimmer.
Inspect and maintain the trimmer regularly.
Has the trimmer been repaired only by an authorized customer service agent?
Always ensure that the ventilation slots are kept clear of debris.
Take care against injury from the blade fitted for cutting the nylon line length. After the feeding line always returns the trimmer to its horizontal operating position before switching on.
Switch off and remove the plug from the socket:
- whenever you leave the machine unattended for any period
- before replacing the spool
- before cleaning or working on the trimmer
After use, disconnect the machine from the mains and check for damage.
Store the machine in a secure, dry place out of the reach of children. Do not place other objects on top of the machine.
Replace worn or damaged parts for safety.
Ensure replacement parts fitted are Bosch approved.
Do not operate the machine without the trimmer attachment fitted.

Electrical Safety

Warning! Switch off, and remove the plug from the mains before adjusting, cleaning or if the cable is cut, damaged or entangled.
The cutting line continues to rotate for a few seconds after the trimmer is switched off.
Caution – do not touch the rotating cutting line.
Your machine is double insulated for safety and requires no earth connection. The operating voltage is 230 V AC, 50 Hz (for non-EU countries 220 V, 240 V as applicable). Only use ap-proved extension cables. Contact your Bosch Service Centre for details. It is recommended for increased electrical safety to use a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it. For products not sold in GB:
WARNING: For your safety, it is required that the plug attached to the machine is connected with the extension cord. The coupling of the extension cord must be protected against splash water, be made of rubber or coated with rubber. The extension cord must be used with a cable strain relief. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition.
If the supply cord is damaged, it must be replaced by a Bosch Service Centre. Extension cords should only be used if they comply with H05VV-F or H05RN-F types.
Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with an internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a main socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less.

Symbols

BOSCH-ART-24-Gras-Trimmer-FIG-2

The following symbols are important for reading and understanding the operating instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the garden product in a better and safer manner.

Intended Use

The machine is intended for the cutting of grass and weeds (up to 25 cm high) under bushes, as well as on slopes and edges that cannot be reached with the lawn mower. Intended use is related to operation within 0 °C and 40 °C ambient temperature.

Technical Data

BOSCH-ART-24-Gras-Trimmer-FIG-4

Noise/Vibration Information

BOSCH-ART-24-Gras-Trimmer-
FIG-5

Declaration of Conformity

BOSCH-ART-24-Gras-Trimmer-
FIG-6

Equipment category: 33
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008 Technical file (2006/42/EC, 2000/14/EC) at: Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2, Stowmarket, Suffolk IP14 1EY, England

Mounting and Operation

Do not disassemble the guard once connected.
Do not connect the machine to the main socket before it is completely assembled.
The cutting line continues to rotate for a few seconds after the trimmer is switched off. Allow the motor/cutting line to stop rotating before switching “on” again.
Do not rapidly switch off and on.
Remove any grass from the spool cover when changing the line or spool.
Only use Bosch-approved cutting elements. The cutting performance will vary with different cutting elements.
Check the guard screw is fixed tightly before using.
The spool feeds line each time the machine comes to a stop (trigger is released), and the line is cut when the machine is started again.

Troubleshooting

Problem	Possible Cause	Corrective Action
Trimmer fails to operate	Power turned off	Turn power on
Mains socket faulty	Use another socket
Extension cable damaged	Inspect cable, replace if damaged
Trimmer runs intermittently	Extension cable damaged	Inspect cable, replace

After-sales Service and Application Service

www.bosch-garden.com In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the garden product.
Great Britain Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland Origo Ltd. Unit 23 Magna Drive Magna Business Park City West Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888