Nexkey Solo Smart Door Lock User Manual

June 5, 2024
Nexkey

Nexkey Solo User Manual

Overview
The Nexkey Solo is the world’s first wireless smart door strike. It takes all the access control intelligence and puts it into the frame of a door.

Lock Compatibility Cylindrical and Mortise without Deadbolt
Frame Compatibility Metal and Wood
Finish 630 Satin Steel
Unlock Credential Nexkey iOS, Android & Apple Watch Apps
Key Management Via Nexkey Mobile Apps and Nexkey Portal
Connectivity Bluetooth LE 5.2 or lower
Bluetooth Range Up to 4.5 meters
Battery Replaceable 2 x 1/2 AA (Lasts for 18 months based on standard high

traffic commercial use)

02NOV21

Included in the Solo Kit:

  • Nexkey Solo
  • Faceplate
  • 2x% AA Batteries
  • Mounting Screws
  • Cut out template

Nexkey Solo Install Instructions (Metal Frame)

Recommended Tools

  1. Dremel Tool w/ metal cutting wheel
  2. Pliers
  3. Metal File
  4. Pencil
  5. Power Drill with phillips head bit
  6. Phillips head screwdriver (#1)
  7. Ruler

Notes:
Door Closer Required With Solo install (to help prevent pre- load) along with the Solo Latch guard recommended if there is significant gap between door and Solo Extended Length Faceplates Plates are available upon request for Wood Frames Extended Length Goof Plates are available upon request Not intended for center-hung doors

Nexkey Solo Install Instructions (Wood Frame)

Recommended Tools

  1. Oscillating Tool with Plunge Cutter
  2. Wood Chisel Set
  3. VIX Drill BIT Set
  4. Valve Paint Marker
  5. Pencil
  6. Ruler
  7. Power Drill with phillips head bit
  8. Phillips head screwdriver (#1)

Notes:
Door Closer Required With Solo install (to help prevent pre-load) along with the Solo Latch guard recommended if there Is significant gap between door and Solo
Extended Length Faceplates Plates are available upon request for Wood Frames Extended Length Goof Plates are available upon request Not intended for center hung doors

Battery Changes

Let s get started

Ready to send those old bulky keys far, far away?
We get it! You’re excited to have Nexkey installed in your space, but now what?
You, as the admin, will receive your smart keys from Nexkey. If you haven’t done so already, download our Nexkey app trom the app store, and set up an account to get access to your smart keychain!
This guide will walk you through the entire Nexkey smart access platform. We hope you enjoy!

Unlock your business nearby or on the go for contractors or guests, share and revoke access, monitor user traffic to your space in real-time, set time restrictions for users, set business hours, and more

Apple App Store
Google Play Store

Nexkey App

set up an account

Unlock Nexkey Solo

FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

– This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals