TELLUR PBC203 20000mAh Compact Power Bank User Guide
- June 5, 2024
- Tellur
Table of Contents
TELLUR PBC203 20000mAh Compact Power Bank
INTRODUCTION
Thank you, for choosing Tellur! Please read this user manual carefully before using the product and keep it safe for future references. Please note! Damages caused by misuse of the product wil not be covered by the product’s warranty.
Technical parameters
Product appearance
Technical specifications
- Battery: Li-polymer
- Capacity: 20000mAh/74Wh (3.7V)
- Micro USB Input: 5V/2.1A
- Type-C Input: 5V/2.1A
- Type-C Output: 5V/2.1A
- USB port 1 Output: 5V/2.1A
- USB port 2 Output: 5V/2.1A
- Total Output: 5V/2.1A
- Dimensions: 151x68x29.5mm
- Weight: 410g
- Protection functions: Short circuit, overcharging, overcharging, overcurrent
- Features: Battery level LED indicator
- Available colors: Black
- Compatibility: Universal
- Package includes: 1 x 20000mAh power bank
- 1 x USB – Micro-USB cable, 26cm, 1 x Manual
Power display light
Indicator light:
Indicator light: There are 4 lights on the device to show the capacity.
- LED flashing
- LED switch off
- LED lighting
The power bank will check and show the percentage of capacity when power on. 4 lights stand for: 25 50 75 100 (%)
Charging instructions
Charge the power bank
- Connect the cable USB port to the charging device and th other end to the Micro USB or Type-C input connector of power bank.
- After connecting, the power bank is automatically charge and the current power level on the battery status indicator flashes. When the battery is fully charged, the status indicator light will be on.
Charge digital equipment
- Check whether the charging voltage of the digital devicematches the discharging voltage of the power bank.
- Select one matching charging cable, connect one end to the power bank output interface, the other end to the digital device, power bank will automatically recognize to charge digital device.
Cautions
- Please note that the external battery can achieve the best performance only after two to three times the full charg cycles.
- To extend the performance of the polymer battery, please, extend the charging time by up to 1-2 hours in the first thre charge cycles.
- Please do not attempt to disassemble or modify the product.
- Please avoid physical damage to the product.
- Please avoid using this product in the following environments: high temperature, low temperature, lo pressure, humidity, dust, strong magnetic field, and long-term
- exposure to sunlight. We recommend using up t an altitude of 3000 meters, 0°C to 35°C and humidity 5-95%.
- This product should not be exposed to drip and splashing with water.
- Please, use a charging cable, specific to the product.
- Please, comply with relevant local environmenta regulations to remove the product and accessories.
- Please, contact your local retailer or customer service center if you have any questions.
Tips
- If you do not use the power bank for a long time, we recommend you to fully charge the battery then placed it the dry environment with temperature range from 5 – 35 °C, please avoid to directly expose the product in sunlight.
- Please fully discharge then perform full recharging if you have not used the power bank for more than three weeks or the battery life of the product becomes shorter.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment.