LOYFUN M300 Party Wireless Speaker User Manual

June 5, 2024
LOYFUN

LOYFUN M300 Party Wireless Speaker

LOYFUN-M300-Party-Wireless-Speaker-Product

Packing List

LOYFUN-M300-Party-Wireless-Speaker-fig-1

  1. M300 Party5peaker
  2. Type-C Cable
  3. Strap
  4. User Manual

Specification

LOYFUN-M300-Party-Wireless-Speaker-fig-14

Diagram

LOYFUN-M300-Party-Wireless-Speaker-fig-2

Powering On/Off

Press and hold for 2 seconds to power on/off
Check it once to change the model.

Charging

LOYFUN-M300-Party-Wireless-Speaker-fig-4

  • Use a certified C-type cable and charger (5V/2A) to prevent any damage.
  • Please fully charge before the first time you use it, to prolong the lifespan of the built-in battery.
  • Do not charge for extended periods after full charge.
  • Red light on when charging, red light off when fully charged

Connecting a Microphone

LOYFUN-M300-Party-Wireless-Speaker-fig-5

  • Plug in 6.5mm Microphone interface to the speaker

How to use your speaker

Wireless Connection

  1. Long pressing the power button for 2 seconds
  2. Pair the M300 speaker with your device LOYFUN-M300-Party-Wireless-Speaker-fig-6

Wireless Disconnection

  • Press and hold for 2 seconds to close the connection to your device
  • Or close the connection on your phone

TF/USB Model

  • Insert TF/USB card into the port
  • Press the button for l second to change the playback model. Max support TF card 32GB/USB. Hotkey LOYFUN-M300-Party-Wireless-Speaker-fig-9

Hotkey

  • Press volume’+’ or’-‘ for 2s, then can skip to the next previous song.

TWS Wireless Pairing

  1. Turn on two M300 speakers.
  2. Disconnect all devices with M300 Speakers.
  3. Single Click the TWS button ‘(TWS)’ on the one of speakers into TWS Pairing Mode LOYFUN-M300-Party-Wireless-Speaker-fig-11
  4. TWS Pairing will be auto-finished after “Beep”.
  5. Click the Device name “M300” to pair on.
  6. Please Pay Attention! When the host and slave TWS are paired, you need to insert the host’s TF card or USB to play songs synchronously between the host and the slave.

Alexa Connection

  1. Disconnect the wireless speaker with all devices.
  2. Put your wireless device in pairing mode.
  3. Open the Alexa app, click the “Settings”
  4. Click Echo Dot device name.
  5. Click the “Wireless”.
  6. Click the speaker name “M300” to pair the wireless speaker with Alexa.

How to change the RGB light

  • Click the light button to change the RGB light model
  • There are five lighting models, you can choose what you like
  • The sixth lighting model is that close the RGB light

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LOYFUN User Manuals

Related Manuals