Smartdisplayer Technology BobeePass Smart Card User Manual

Technology BobeePass Smart Card
User Manual

Doc. Num.: SD006_SP_0005
Version: V10
BobeePass
Effective Date: 2022/05/16
BobeePass User Manual
This document is the exclusive property of SmartDisplayer and shall not be reproduced or copied or transformed to any other format without prior permission of SmartDisplayer.

BobeePass Card

1.1. Card Front Side:

The NFC function has not been enabled.
Button:
It’s used to power on/off BobeePass and change function.
Its operation flow is “Power on BobeePass with NFC interface”, “Switch to BLE interface”, then “Power off BobeePass”.
Green Color LED:
It indicates NFC interface status during operation.

Blue Color LED:
It indicates BLE interface status during operation.

This document is the exclusive property of SmartDisplayer and shall not be reproduced or copied or transformed to any other format without prior permission of SmartDisplayer.
1.2. Card Back Side

BobeePass Device ID:
“BobeePass ” with 6 digits suffixed number is printed on card backside to indicate BobeePass device ID. It would be used during BLE interface operation.
Passkey:
BLE passkey is print card back side during BLE pairing operation request.

BLE Pairing

2.1. Power on BobeePass and change to BLE interface.
2.2. Connect to BobeePass on a mobile device (PC, smartphone, etc.).
2.3. Input 6 digits BobeePass BLE passkey which you can find it from the card’s back side.

BLE Interface Registration Flow

3.1. Sign in to your account in a mobile device.
3.2. Add in your account.
3.3. Power on BobeePass and change to BLE interface.
3.4. Flow website/software/APP instruction to complete registration.

BLE Interface Login Flow

4.1. Sign in to your account in a mobile device.
4.2. Power on BobeePass and change to BLE interface.
4.3. Flow website/software/APP instruction to complete login.

FCC ID: 2ADPT-BOBEEPASS

FCC Statement:

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This document is the exclusive property of SmartDisplayer and shall not be reproduced or copied or transformed to any other format without prior permission of SmartDisplayer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>