HI-603X GPS Tracker Auto

HI-603X
Easy Manual

HI-603X is a multi-functional and cost-efficient communication platform ideal for all AVL applications. It integrates most recent high sensitivity GPS chipset and quad-band (850/900/1800/1900) GSM communication module with powerful microcontroller into a compact/ lightweight size.
HI-603X is secured in a solid enclosure for simple installation without sweat and hassle. Nevertheless, not only it provides user with real time GPS location and accurate vehicle status all the time on server, but also it allows user to command vehicle remotely by one-click on computer. In a word, HI-603X accomplishes advanced implementation of convenient fleet management, enhanced vehicle safety, simultaneous emergency response, and merchandise/ package transportation, etc… Unlimited advantages are available with HI-603X extensive applications.
Quad band 850/900/1800/1900 MHz GSM system External SiRF Star III high performance GPS receiver External GSM active antennas Advanced communication via SMS/TCP/UDP/HTTP
Program and control the tracker from the OTA (Over the Air) web tracking platform and also USB configurations.
Build in motion sensor for power saving. Support emergency/ over speed/ motion/ power lost alarm. Real time location report on preferred interval and vehicle status monitoring. Premium functions: Fast GPS Fixed/ A-GPS/ Geo- Fencing/ Hands free Kit/ Anti-Theft/ Data Logger function – 30,000 records or more.
Low battery alarm and battery voltage status.
Optional SOS button. Minimum GPRS sending interval 5~10 seconds and interval adjustable.

HI-603X Characteristics
Items Power Supply Backup Battery Normal power consumption Dimension Operating temperature Humidity Frequency GPS Chipset GPS Sensitivity GPS Frequency C/A Code Channels Position Accuracy Velocity Accuracy Time Accuracy Default datum Reacquisition Hot start Warm start Cold start Altitude Limit Velocity Limit Interface

Specifications DC +9V – +28V 550mAh 85mA/h 116mm x 55mm x 24mm -20 to 55 5% to 95% Non-condensing GSM 900/1800/1900Mhz latest GPS SIRF-Star III chipset -159Db L1,1575.42 MHz 1.023MHz chip rate 20 channel all-in-view tracking 10 meters, 2D RMS 0.1 m/s 1 us synchronized to GPS time WGS-84 0.1 sec. , average 1 sec. , average 38sec. , average 42 sec. , average 18,000 meters (60,000 feet) max. 515 meters / second (1000 knots ) max One input and one output

Main unit overview
1. GSM antenna plug 2. SIM card holder 3. Transmission status 4. GSM signal status 5. Power status 6. GPS receiver plug
1. 12V~24V cigarette lighter power in 2. Connected to tapping microphone 3. Mini USB connector for set up 4. Connected to vehicle control wirings 5. Connected to the HI-403BT Bluetooth box

Dimensions LED indicator

Hardware and Accessories
Standard packing
1. HI-603X main unit 2. SIM card tray 3. GPS receiver 4. GSM antenna 5. CD 6. Vehicle control wires 7. Mini USB to USB set up cable 8. Tapping microphone 9. Relay

Getting Started
1. Push in the yellow part with a pen to release the SIM card holder.
2. Place the local SIM card on the holder. (Make sure to disable the SIM card pin code requirement. Do this from your mobile phone.) Close the tray. Note the tray does not quiet sit flush with the unit when closed.
3. Connect the GSM antenna and GPS receiver to HI-603X

Setting up
For the initial set up from the retail box, you will need to use the set up program from the inclusive small CD and perform the set up from your computer.

1. Connect the mini USB to the computer port.
   Connect the HI 603X to the USB cable. The HI-603X will initially show all lites illuminated. See p5
   2. Open the tracker set up program by double clicking on “tracker.exe”

3. Click “Get Parameter”
4. A message will show “Get Finish” and all the trackers current set up will appear. Please double check with your local telecomm service provider to make sure the SIM card APN (Access Point Name) and fill in and program to the tracker.

Initial computer set up reminder:
On factory defaults, the basic set up was done. As soon as you plug in the computer and get parameter, the computer will automatically get and show the tracker imei # on the program. You will double check with your SIM card telecomm service provider for the correspondent APN (Access Point Name) and key in to the APN section (like the below blue block). The APN could be for instances, ” internet “, ” web. Vodafone ” or any name. Also, please double check if the IP and port settings (the below red block) was correctly set up. (for use with Haicom GPRS web tracking: http://www.tracking.haicom.com.tw:8090/Default.aspx ) The above settings are the must to make the tracker to start sending data back to our server and show on the platform. The rest of selections will be set up depend on individual user’s preferences.

X series trackers User guides for USB settings and SMS features
1. USB Settings :
A. Press to get the tracker current settings B. Press to save the settings changed C. Press to download the GPS data logger records D. Press to delete and clean out the GPS logger records. To avoid the records capacity too full (the full capacity is about 257,000 points) and slow down the download time, the records deleting is recommended after download the GPS data logger. E. The Password is for the security purposes and the SMS commands can be used after the password verification. F. Press to re-flash all settings back to defaults G. The tracker’s imei# H. The current firmware version. The file name is based on the data of the generating. I: The parameter settings for different functions:

1. The continue SMS sending time interval to certain preset phones. The setting is recommended to set more than 10 (s), 10 seconds, and set ” 0 ” means switch off this function. 2. The continue GPRS GPS coordinates sending time interval to the server. The setting is recommended to set more than 15 (s), 15 seconds, and set ” 0 ” means switch off this function. 3. The GPS data logger recording time interval. The setting is recommended to set more than 3 (s), 3 seconds, and set ” 0 ” means switch off this function. 4. The geo- fencing setting range (in diameter) The setting is recommended to set more than 500 (m), 500 meters. 5. To temporary disable all the alert functions. The setting is recommended to set less than 300 (s), 300 seconds. During the time, all the alert features will be disabled. 6. The ringing times after the voice tapping function activated. 7. The motion sensor sensitivity. The setting is recommended to set between 21 to 24, The less the number, the higher the sensibility. 8. The speed limit alert function. The alert will shown after the tracker speed higher than the speed ( in kilometer per hour)
J: The on/off settings for the alert functions: 1. Turn on or off for the vehicle anti-thief alarm function 2. Turn on or off for the SOS button alarm function 3. Turn on or off for the geo fencing alarm function. The function here is only for testing and the function will be switched off once the geo fencing function activated (only one time) 4. Turn on or off the alarm when the tracker external power cut off. 5. Turn on or off the alarm when the tracker battery voltage power lower than 3.6V (battery
low) 6. Turn on or off for the motion sensor alarm function. The function here is only for testing and the function will be switched off once the motion sensor function activated (only one time) 7. Turn on or off for the GPS in 3D fixed inform function. The function here is only for testing and the function will be switched off once the GPS 3D fixed function reported (only one time) 8. Turn on or off for the over speed alarm function. The function here is only for testing and the function will be switched off once the over speed function activated (only one time)
K: The settings for the tracker buzzer sound or silent: 1. Buzzer sound or silent every time when the SMS coordinates sending 2. Buzzer sound or silent every time when the GPRS coordinates sending 3. Buzzer sound or silent when the geo fencing alarm sent 4. Buzzer sound or silent when the USB set up completed 5. Buzzer sound or silent after receiving the settings from the web tracking site 6. Buzzer sound or silent after receiving the settings from the phone SMS command

7. Buzzer sound or silent when press the buttons (only available for the HI- 602X and the optional car kit box)
L: Set up the APN (Access Point Name) from the SIM card telecomm service provider
M: Set up the IP/Domain address of the tracking server for the GPRS data to send to 1. Can set up either the IP or the domain name 2. Set up the server receiving data protocol and port (Set TCP if the server protocol is TCP) 3. Set up the server receiving data protocol and port (Set UDP if the server protocol is UDP) 4. Set up the two-way configuration port between the server and the tracker. User can also set as ” 0 ” to disable the GPRS function (under this mode, the SMS and the data logger functions still keep on working) User can also set as ” 1 ” to switch off both the server alarm control function and the two-way configuration function (under this mode, the GPRS coordinates sending functions still keep on working)
N: Set up the telephone numbers which will receive SMS from all the alarm functions activated and the tapping voice (except for the SOS)
O: Set up the telephone numbers which will receive SMS when the SOS alarm functions activated and the tapping voice
P: Set up the telephone numbers which will receive SMS with the continue coordinates and the tapping voice
Q: Set up the sleeping mode and the times: 1. Full power: Keep on sending coordinates none stop. Highest power consumption and no need to set up the times. 2. GPS Off: The tracker GPS function will be switched off (based on the Time To Sleep’ colume time) after the tracker no moved. Under this mode, the tracker still stand by to take the commands from the phone SMS or from the web tracking set up) As soon as the tracker moved again, the GPS function will start to work again. Under this mode, the tracker power consumption will be less. 3. All Off: The tracker all functions, GPS, GSM, etc. will be switched off (based on theTime To Sleep’ colume time) after the tracker no moved. Under this mode, the tracker will not be able to take any commands from the phone SMS or from the web tracking set up) As soon as the tracker moved again, all the functions will start to work again. Under this mode, the tracker power consumption will be lowest. 4. Weak Up: The tracker all functions, GPS, GSM, etc. will be switched off (based on the Time To Sleep’ colume time) regardless of the tracker motion sensor moved or not. Under this mode, the tracker will not be able to take any commands from the phone SMS or from the web tracking set up) After the finish the sleep time (based on theTime To Weak UP’

colume time) the tracker will switched on again to work normal. The automatic sleep and weak up will be cycled continuesly base on the settings. The mode is suitable for the condition that the user only need to know the tracker updated locations in some fix time and let the tracker go sleeping mode (switched off) to save power consumption. The `Time To Sleep’ set up is recommended to set no less than 3 minutes so that the tracker GPS have enough time to let the GPS get 3D fixed. In this way, the tracker can send the updated real time location (GPS 3D fixed location) back to the server.
R: Firmware update: After the firmware updated, delete the GPS log data in the tracker is recommended to make sure the tracker internal memory stay in complete.

Terms Explanations
System Config: 1. IMEI: Tracker imei # 2. Version: Tracker firmware version 3. SMS intervals[s]: Interval of tracker send real time position with Google
map hyperlink via SMS
4. GPRS interval[s]: Interval of tracker send real time position to the server via GPRS
5. LOG interval[s]: Interval of tracker data logging 6. Geofence [m]: Send warning when tracker out of the Geofencing range 7. Alarm Reset[s]: Time of all the security functions temporary disabled 8. Ringing of Call[Times]: Tracker ringing time when user call

SMS Command for X seris

Code Format

Function

100 #0000,100

Request all setting values back

151 #0000,151,0000000000,0000000000,0000000000

Set Security Phone Number.(10 Max.)

152 #0000,152,0000000000,0000000000,0000000000

Set SOS Phone Number (10Max.)

153 #0000,153,0000000000,0000000000,0000000000

Set SMS Phone Number (10 Max.)

154 #0000,154

Get Security Phone Setting

155 #0000,155

Get SOS Phone Setting

156 #0000,156

Get SMS Phone Setting

200 #0000,200,APN,USER,PASS

Set APN

201 #0000,201

Get APN Setting

210 #0000,210,IP,TCP port,UDP port,config port,protocol select

Set IP and Port

0000,210,60.250.68.23,9101,9120,1943,0

211 #0000,211

Get IP and Port Value

250 #0000,250,SMS,GPRS,LOG,Geo,Alarm,Ring,Speed,Sensor

Set Interval and Parameter

0000,250,0,30,0,500,60,0,20,10

251 #0000,251

Get Interval Setting

300 #0000,300,Buglar,SOS,GEO,PWCUT,LBAT,Vir,GPS,OPA

Set Event

0000,300,0,1,0,1,1,0,0,0

301 #0000,301

Get Event Setting

350 #0000,350,SMS_Send,GPRS,GEO,USB,WEB,SMS_Set,KEY Set Buzzer

0000,350,0,0,0,1,1,1,1

351 #0000,351

Get Buzzer Setting

400 #0000,400,Mode,Hour1,Minute1,Second1,Hour2,Minute2,Second2 Set Power Saving Mode

0000,400,1,0,5,0,0,0,0

401 #0000,401

Get Power Saving Mode Setting

01 #0000,01,Pass,Pass

Set Password

0000,01,0000,0000

10 #0000,10

Get GPS Data

11 #0000,11,Phone Number

Talking Permitted

12 #0000,12,1

Relay #1 On/Off

13 #0000,13,1

Relay #2 On/Off

14 #0000,14

Tracker Reset

15 #0000,15

Inform Tracker send TX000 to Server

16 #0000,16,1

Set GEO Fencing Activate

17 #0000,17,1

Set GPS Fixed Alarm Activate

18 #0000,18,1

Set Moving Alarm Activate

19 #0000,19,1

Set Over Speed Alarm Activate

EXAMPLE#0000,210,60.250.68.23,9101,9120,1943,0 # SMS initial code 0000 password (default is 0000) 210 Initial command code 60.250.68.23,9101,9120,1943,0 Varies parameters
Fill in ” * ” between the comma when the above parameters unchanged. Fill in nothing between the comma to empty the data (originally there are some parameters in between, such as the APN, USER and the PASS) Different parameters will divided by comma: ” ”
Explanations to the initial command code:
151 (Set Security Phone Number)
Fill in maximum 10 phone numbers
152 (Set SOS Phone Number)
Fill in maximum 10 phone numbers
153 (Set SMS Phone Number)
Fill in maximum 10 phone numbers
200 (Set APN)
APNGPRS Access Point Name of the SIM card (check with your telecomm service provider for the exact APN USERAPN user name PASSAPN password
210 (Set IP and Port)
IPThe server IP address which the tracker will send to (Domain name also OK) TCP portThe destinate server TCP port UDP portThe destinate server UDP port Config portSet up the two-way configuration port between the server and the tracker. User can also set as ” 0 ” to disable the two way configuration function. Protocol selectSelect the communication protocol between the tracker and server 0 TCP1 UDP
250 (Set Interval and Parameter)
SMS: The continue SMS sending time interval to certain preset phones. The setting is recommended to set more than 10 (s), 10 seconds.

GPRS: The continue GPRS GPS coordinates sending time interval to the server. The setting is recommended to set more than 15 (s), 15 seconds. LOG: The GPS data logger recording time interval. The setting is recommended to set more than 3 (s), 3 seconds. Geo: The geo-fencing setting range (in diameter) The setting is recommended to set more than 500 (m), 500 meters. Alarm: To temporary disable all the alert functions. The setting is recommended to set less than 300 (s), 300 seconds. During the time, all the alert features will be disabled. Ring: The ringing times after the voice tapping function activated. Speed: The speed limit alert function. The alert will shown after the tracker speed higher than the speed ( in Km/h kilometer per hour) Sensor: The motion sensor sensitivity. The setting is recommended to set between 21 to 24, the less the number, the higher the sensibility.
300 (Set Event)
Buglar: Enable or disable ( 1 enable, 0 disable ) to send SMS when the vehicle anti-thief alarm function activated SOS: Enable or disable ( 1 enable, 0 disable ) to send SMS when the SOS button pressed GEO: Enable or disable ( 1 enable, 0 disable ) to send SMS when the geofence triggered ( for test only) PWCUT: Enable or disable ( 1 enable, 0 disable ) to send SMS when the tracker external power source was cut. LBAT: Enable or disable ( 1 enable, 0 disable ) to send SMS when the tracker internal battery low (less than 3.6V) Vir: Enable or disable ( 1 enable, 0 disable ) to send SMS when the tracker moved ( for test only) GPS: Enable or disable ( 1 enable, 0 disable ) to send SMS when the GPS fixed ( for test only) OPA: Enable or disable ( 1 enable, 0 disable ) to send SMS when the car speed over setting ( for test only)
350 (Set Buzzer)
SMS Send: Buzzer sound or silent ( 1 enable, 0 disable ) every time when the SMS coordinates sending GPRS: Buzzer sound or silent ( 1 enable, 0 disable ) every time when the GPRS coordinates sending GEO: Buzzer sound or silent ( 1 enable, 0 disable ) when the geo fencing alarm sent USB: Buzzer sound or silent ( 1 enable, 0 disable ) when the USB set up completed WEB: Buzzer sound or silent ( 1 enable, 0 disable ) after receiving the settings from

the web tracking site SMS Set: Buzzer sound or silent ( 1 enable, 0 disable ) after receiving the settings from the phone SMS command KEY: Buzzer sound or silent ( 1 enable, 0 disable ) when press the buttons (only available for the HI-602X and HI-603)
400 (Set Power Saving Mode)
ModeSet up the sleeping mode: 0 Full power1 GPS off2 all off3 fixed on/off time
Hour1Time setting, hours Minute1Time setting, minutes Second1Time setting, second ( please consult the above USB setting guides “Time To Sleep” Q ) Hour2Time setting, hours Minute2Time setting, minutes Second2Time setting, second ( please consult the above USB setting guides “Time To Weak Up” Q )
01 (Set Password)
PassSet up the new password (needed to be 4 digits) PassKey in once again the new password (the set up can only success when this 4 digits are identical to the above 4 digits)
10 (Get GPS Data)
Request the current GPS coordinates from the tracker
11 (Talking Permitted)
Allow some specific phone to do the phone tapping and the request will only available one time and user will set another command when once again need such function. For instances, the telephone number, 0937777777, was not fill in the list of the preset telephone numbers (like, the SCU, SOS, SMS from the USB column) When need to do the tapping, send SMS command #0000,11, 0937777777 to the tracker and the user can use the phone 0937777777 to do the tapping once.
12 (Relay #1 On/Off)
1 cut off relay0 recover the relay to normal
13 (Relay #2 On/Off)
1 cut off relay0 recover the relay to normal
14 (System Reset)
Request the tracker re-flesh all settings

15 (Inform Tracker send TX000 to Server)
Request the tracker and the server to perform the two ways synchronize communications (In order to let the tracker and the server to do the two way settings and information exchanges, they must stay in connection status. But, under some circumstances, the tracker is not connected to the server, such as under GPS off mode (sleeping mode) although the GSM is active but the tracker do not stay connect with the server. With this command, the tracker will immediately take the server command and react. If not, the tracker will also proactively connect to the server within 3 minutes)

16 (Set GEO Fencing Activate)
Activate GeoFencing alarm send back1 enable , 0
for one time and will set up once again when need it.

disable The function only available

17 (Set GPS Fix Alarm Activate)
Activate GPS in 3D fixed message send back1 enable , 0
available for one time and will set up once again when need it.

disable The function only

18 (Set Moving Alarm Activate)
Activate motion sensor alarm send back1 enable , 0
for one time and will set up once again when need it.

disable The function only available

19 (Set Over Speed Alarm Activate)
Activate over speed alarm send back1 enable , 0
one time and will set up once again when need it.

disable The function only available for

The tracker will automatically send SMS message notice that the above settings and control executed successfully.

SMS GPS coordinates send back guides:
EXAMPLE: $T120808R1,GPS,A,N,24″59’58.26,E,121″29’21.65,000030.0,182.57,120808,074222*(0124971 23456789),http://maps.google.com/maps?q=24.999518,121.489352

Explanations:

$

SMS initial code

T120808R1 Firmware version

GPS

SMS message type (please consult the below SMS message type list)

A

GPS fixed status (A in 3D fixed ,V not fixed yet)

N,24″59’58.26,E,121″29’21.65

Coordinates (Format: degree” minute’ second)

000030.0 Speed ( Sea mile)

182.57

Direction angle ( degree)

120808

GPS time (UTC)

074222

GPS time (UTC)

012497000242432

Tracker imei#

http://maps.google.com/maps?q=24.999518,121.489352 The hyperlink URL to the map Click

the link to see the map

SMS message type:

GPS

Upon request with command 10, the tracker will keep on sending (SMS interval)

the

GPS coordinates back via SMS

BUR

Burglar Alarm activated

BATLOW

Battery power low (less then 3.6V) alarm

POWCUT

Tracker external power cut off alarm

SOS

The SOS button press

GPS_OK

GPS 3Dfixed report

GEO

Geo Fencing activated

VIA

Vibration Alarm activated

OSA

Over Speed Alarm activated

• Update new firmware
  1. Decompress the files. 2. Run the TRACKER program
  3. Plug the tracker to the computer USB port 4. Press the GET PARAMETER and see the current settings 5. Press the UPDATE 6. Open the firmware (2 files)
  7. Show the below message and click OK

8. The firmware start loading 9. The below message shown and press OK

1. Initial registration from the GPRS web tracking platform: http://www.tracking.haicom.com.tw:8090/
2. New user; please register before login.

3. The tracker imei # is shown on the bottom of the sticker: 4. After login, select the ” Manage ” for Add New Tracker

• Program tracker from Haicom GPRS web tracking web site 1. Make sure the tracker connected to the GSM network and start sending back
  the data 2. On the Manage/Device Settings section, select the tracker and press Load
  3. Change the prefer settings

4. Press Setup and will show: Device information update successfully

How to generate the detail report print out with address
1. Select the preferred from and to date and click ” Search ” 2. Click ” Download ” and the csv file will be saved as Excel file 3. Click ” Address Transfer.zip ” for the transfer program

1. Click ” Address Transfer program icon to run the program ” 2. Select the csv Excel file 3. Click ” Transfer Address (3) ” 4. After the translate program running, the ” Translate successful ! ” message will appeared. In the mean time, there will extra Excel file with (Address) saved on your desktop. Open the file, you will see the retail reports, with Date/time/long./lat./detail address data like below example shown.

The example of the detail report printout
HI-603X installation video guides
How to connect and install Haicom Tracker

How to connect and install HI-603X

How to calculate the historical total travel distance:
1. Click the preferred start point 2. Click the start point icon

3. Click the preferred end point 4. Click the end point icon
5. Click the Distance icon to get the total traveled distance

How to send command from the GPRS tracking platform:
1. Click Manage -> Command Send:
2. Click to send commands from the platform: Status Open (0) means the relay is stay connection. To cut the relay (cut off the ignition, oil pump, power, etc.), select Close (1)

3. Click the Select to see the command sending status:

Set up GeoFencing function steps:
Basically, there are two ways to set up the geo fence function and both ways are independent to each other. For instance, if you set up the geo fence alarm on the map radius, the trigger will only report to the tracking site. If you set up the geo fence function from the Manage -> Device Setting, from the SMS or from the computer set up program, it will only report the alarm to the phone (and not to the tracking site) 1. Set up geo fence radius on the tracking site: 1. Move the mouse cursor to the preferred geo fencing point and double click it.
The red bubble will appeared:
2. Key in the preferred geo fencing radius range (in km) and click Set. After the clicking, the blue circle will appeared on the map. User can select to get the geo fencing alarm when the tracker enter or leave the radius range.

3. Make sure click ” Yes ” on the Enable section so that the geo fencing function will work.
Then, click Setup to complete the procedures. In the mean time, the Update Time will show the time that you set up and show Update Successful on the side:
2. Set up geo fence from the Device Settings: User can use different ways to set up the geo fence functions: a. On the GPRS tracking site, go Manage and Device Setting and press “load”:
Set up the geo fence range, say 500 meters radius, the tracker will report to the preset phones while the feature triggered.

b. Connect the tracker to your computer and set up geo fence from the set up program:
c. The geo fence will triggered only once and user will set up again from the SMS command to activate the alarm once again:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>