SEG 10FT Backlit Trade Show Counter Instruction Manual

SEG 10FT Backlit Trade Show Counter

What’s In The Box

1. Bottom Frame w/LED Stripe (x2)
2. Profile Bar w/Cable (x2)
3. Profile Bar without Cable (x2)
4. Base Plate (x2)
5. Corner Connector (x2)
6. Power Supply w/Device Plugin
7. Counter Top wi/LED Stripe
8. Soft Travel Case
9. Graphic

Assembly Instruction

1. Assemble The Frame
   Assemble the base by connecting the Bottom Frame w/LED Strips to the Frame Feet

2. Assemble The Counter Top
   Connect the countertop w/LED Strip to the top corner brackets.

3. Assemble The Frame
   Install the Side Frame w/Cables, then add the countertop.

4. Install The Graphic
   Instal graphics by firmly pushing the silicone edge into the channel on the from of the frame. Keep tension on the graphic as you go down each side so that there is enough fabric to reach the end

Storage & Care

Store in a cool dry location. Clean the hardware with a damp cloth. Machine wash the graphics in cold water on a gentle cycle. Air dry only. Use a steamer for wrinkles. Never dry-clean.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>