BOSE LBS00001B2 Lexie Hearing Aids User Guide
- June 3, 2024
- Bose
Table of Contents
Lexie Hearing Aids
Powered by Bose
LBS00001B2 Lexie Hearing Aids
User Guide
Lexie Hearing Aids
We’re here to help.
For help,
call 779-212-7334 and speak to a Lexie
Expert ™ or go to
lexiehearing.com/us/support
What you need:
Step 1:
Identify the two ends of the receiver wire.
Step 2:
On the hearing aids, find the old receiver wire that has the same color speaker as the new cable (red or blue).
Step 3:
Firmly pull the old receiver wire until it detaches from the hearing aid body.
Note : You may have to pull harder than expected.
Step 4:
Align the clear plastic end of the new receiver wire with the port on the hearing aid body so the red or blue marks line up.
Step 5:
Insert the receiver wire into the hearing aid body until you hear or feel a click.
Step 6:
Get a dome for the new receiver wire. Either pick your size from a dome kit (available separately) or firmly pull the dome off of the old receiver wire.
Step 7:
On the new receiver wire, align the opening of the dome with the receiver and slide the dome onto the receiver.
Step 8:
Gently tug the dome to make sure it’s securely fastened.
Note : This helps prevent the dome from falling off in your ear canal.
Copyright © 2016-2022
heard IP (Pty) Ltd.
44-0010-03, REV1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>