YHDAA M300D Barcode Scanner User Guide
- June 4, 2024
- YHDAA
Table of Contents
- YHDAA M300D Barcode Scanner
- End Mark
- Buzzer Setup
- Trigger Mode
- Capital & Lowercase Setup
- Duplicate Barcode Upload Setup
- Invoice Function
- Interface setup
- Serial Port Setup
- Language Setup
- Add Prefix
- Add Suffix
- Delete Characters
- Appendix 1: Parameter Code
- ASCII
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
YHDAA M300D Barcode Scanner
Restore Defaults
If the scanner can not work normally, Pls scan “Restore Defaults
End Mark
Buzzer Setup
Trigger Mode
Capital & Lowercase Setup
Duplicate Barcode Upload Setup
Duplicate
Detection time setting
- Please refer to Appendix 1: Parameter Code
- For example , to set the recoding delay time to 10s (10000ms), you need to scan “Duplicate Detection-ON”-“Duplicate
- Detection time: settings”-Parameter Code “1”-“0”-“0”-“0 “-” 0″-“Save settings” PS: Setting range 1-3600000ms
Invoice Function
Interface setup
Serial Port Setup
Language Setup
Add Prefix
Add Prefix
E.g. The bar code content is “123456789”, add X and Y before the bar
code(Check ASCII Barcode Table, X=58, Y=59), and” XY123456789” will be shown.
Please scan the following code in order: “Display Prefix-ON”>”Add
Prefix”>Parameter Code”5″,”8″,”5″,”9″>”Save settings”
Add Suffix
Delete Characters
The number of digits deleted
E.g. The bar code content is “123456789”, if you want to set the scanner
to delete the number 1, ”23456789” will be shown.
Please scan the following code in order: “Delete Characters-ON”>”Before
Barcode”>” The number of digits deleted”>”Parameter Code “1”>”Save settings
Appendix 1: Parameter Code
ASCII
| He | De | Description | He | De | Description | He | De | Description |
|---|---|---|---|---|---|---|---|---|
| 00 | 0 | NUL | 2B | 43 | + | 56 | 86 | V |
| 01 | 1 | SOH | 2C | 44 | , | 57 | 87 | W |
| 02 | 2 | STX | 2D | 45 | — | 58 | 88 | X |
| 03 | 3 | ETX | 2E | 46 | 。 | 59 | 89 | Y |
| 04 | 4 | EOT | 2F | 47 | / | 5A | 90 | Z |
| 05 | 5 | ENQ | 30 | 48 | 0 | 5B | 91 | [ |
| 06 | 6 | ACK | 31 | 49 | 1 | 5C | 92 | \ |
| 07 | 7 | BEL | 32 | 50 | 2 | 5D | 93 | ] |
| 08 | 8 | BS(Backspa | 33 | 51 | 3 | 5E | 94 | ^ |
| 09 | 9 | HT(Tab) | 34 | 52 | 4 | 5F | 95 | _ |
| 0A | 10 | LF(CTRL J) | 35 | 53 | 5 | 60 | 96 | ` |
| 0B | 11 | VT(CTRLK) | 36 | 54 | 6 | 61 | 97 | a |
| 0C | 12 | FF(CTRLL) | 37 | 55 | 7 | 62 | 98 | b |
| 0D | 13 | CR(Enter) | 38 | 56 | 8 | 63 | 99 | c |
| 0E | 14 | SO(CTRL N) | 39 | 57 | 9 | 64 | 10 | d |
| 0F | 15 | SI(CTRLO) | 3A | 58 | : | 65 | 10 | e |
| 10 | 16 | DLE(CTRLP | 3B | 59 | ; | 66 | 10 | f |
| 11 | 17 | DC1(CTRL | 3C | 60 | < | 67 | 10 | g |
| 12 | 18 | DC2(CTRL | 3D | 61 | = | 68 | 10 | h |
| 13 | 19 | DC3(CTRL | 3E | 62 | > | 69 | 10 | i |
| 14 | 20 | DC4(CTRLT | 3F | 63 | ? | 6A | 10 | j |
| 15 | 21 | NAK(CTRL | 40 | 64 | @ | 6B | 10 | k |
| 16 | 22 | SYN(CTRL | 41 | 65 | A | 6C | 10 | l |
| 17 | 23 | ETB(CTRL | 42 | 66 | B | 6D | 10 | m |
| 18 | 24 | CAN(CTRL | 43 | 67 | C | 6E | 11 | n |
| 19 | 25 | EM(CTRL Y) | 44 | 68 | D | 6F | 11 | o |
| 1A | 26 | SUB(CTRL | 45 | 69 | E | 70 | 11 | p |
| 1B | 27 | ESC(ESC) | 46 | 70 | F | 71 | 11 | q |
| 1C | 28 | FS(CTRL \) | 47 | 71 | G | 72 | 11 | r |
| 1D | 29 | GS(CTRL ]) | 48 | 72 | H | 73 | 11 | s |
| 1E | 30 | RS(CTRL ^) | 49 | 73 | I | 74 | 11 | t |
| 1F | 31 | US(CTRL_) | 4A | 74 | J | 75 | 11 | u |
| 20 | 32 | (space) | 4B | 75 | K | 76 | 11 | v |
| 21 | 33 | ！ | 4C | 76 | L | 77 | 11 | w |
| 22 | 34 | “ | 4D | 77 | M | 78 | 12 | x |
| 23 | 35 | # | 4E | 78 | N | 79 | 12 | y |
| 24 | 36 | $ | 4F | 79 | O | 7A | 12 | z |
| 25 | 37 | % | 50 | 80 | P | 7B | 12 | { |
| 26 | 38 | & | 51 | 81 | Q | 7C | 12 | |
| 27 | 39 | ‘ | 52 | 82 | R | 7D | 12 | } |
| 28 | 40 | ( | 53 | 83 | S | 7E | 12 | ~ |
| 29 | 41 | ) | 54 | 84 | T | 7F | 12 | DEL |
| 2A | 42 | * | 55 | 85 | U |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>