ZEBRONICS ZEB-PixaPlay 11 Portable LED Projector User Manual
- June 4, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-PixaPlay 11 Portable LED Projector User Manual
Dear Customer,
Thank you for purchasing the ZEB-Pixaplay 11 LED Projector. Please read
the user manual carefully before usage & save it for future reference.
Note:
- To provide a stable power supply, kindly use the cable provided (DC19V, 2.5A) with the product and connect to a AC 100-240V, 50/60Hz power source.
- Avoid the self disassembly of the product as it results in the failure of Warranty.
- Avoid looking directly at the projector lens while it is active.
- Make sure that the projector’s air vents are not blocked while in use. The device must be kept in a well insulated surrounding for proper functioning.
- It is recommended to power OFF the projector after a continuous usage of 6 hours.
- Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
- In case of enquiry regarding the projector, email us at enquiry@zebronics.com or contact us at 044 4000 0004.
Features
- Home Theater Projectors for Movies, TV & Gaming etc..
- Projector comes with mSD, AV IN, AUX OUT, USB, HDMI.
- Built in Speaker
- Remote Control
- Compact Design
Specification
- Screen size: 112-381cm
- Native Resolution: 1280 x 720P
Max. Supported
- Resolution: 1920 x 1080P (Max)
- Display Technology: LED
- Lifespan: 30,000H
- Brightness: 1500 lumens
- Contrast ratio: 1000:1
- Projection Distance: 1.5m – 5.6m
- Port Interface: mSDAV IN, AUX OUT, USB, HDMI
- Video file format: 3GP, AVI, DIVX, H264, MOV, Mp4, MPEG1, MPEG2, MKV, VOB
- Input Voltage: DC19V, 2.5A
- Product Dimension (WxDxH): 147 x102 x25mm
- Net.weight: 142
*When the Micro USB port is used as input using a 5V Adapter/Power bank, the output will be lower. Please use the provided Adapter for optimal results.
Package Contents
- Projector: 1 Unit
- Remote Control: 1
- Unit PowerAdapter: 1
- Unit AV cable: 1
- Unit HDMI Cable: 1 Unit
Product Description
Remote Control
*NOTE:
- To avoid power shortage, please do not mixed use the old and new battery.
- To avoid battery leakage corrosion, if do not use remote control fora longtime, please take the battery out.
Projector Connection
-
U disk or Portable External Hard Drive slot
-
HDMI input slot
-
AV input slot
-
Earphone slot
-
Micro SD (TF) card slot
*Coould connect multi-device and applications.
Setting Up the Projector
- Connect the power cord to the projector and turn it ON, You’ll be indicated with the white color LED near power button.
- Before turning ON, make sure to place it in a flat surface for a proper projection then Press the power button / turn it on by using the remote.
- Align the projector as shown in the image below to ensure proper projection.
|
|
---|---|---
Incorrect installation
The images left-right small| Correct installation
The images is rectangular| Incorrect installation
The images right-left small
Focus Adjustment
Once the projector turns ON, wait till it gets loaded. After boot-up adjust the focus knob in the projector until the images/video gets stabilized.
USB & SD Card Interface
Connect the USB Drive/mSDwith the content to the projector. Select “Media” the
content in the USB drive should be present inside the media
(Images/Videos/Music).
HDMI, AV & AUX Interface
- Once the HDMI / AV is connected to the projector, you will need to select the specific signal source as the input. After connected the content played from the source will be streamed on the projector.
- Connect the AUX for the external sound source
Picture Settings
Open the home page -“Setting”. In the Picture Setting, you can set up the
projection mode, image scaling, aspect ratio and picture mode of the
projector.
System Settings
Open the home page – “Setting”. In the System Setting, you can set up the OSD
language, software update, factory restore and auto sleep of the projector.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>