BELLROSS BR-01 cyber skull sapphire User Manual
- June 4, 2024
- BELLROSS
Table of Contents
BELLROSS BR-01 cyber skull sapphire User Manual
GENERAL USAGE
Starting the watch. Once the watch has been stopped (crown in position 0), wind the mechanism by turning the crown in a clockwise direction. After approximately 40 rotations, the watch is fully wound. The power reserve is approximately 50 hours when fully wound.
Setting the time. Pull the crown out to position 1. Set the time by rotating the crown in the required direction.
Movement: hand-wound mechanical. Calibre BR-CAL.209. Power reserve of approximately 50 hours. Functions: hours and minutes. Case: length 43,5 mm, width 45 mm.
Overview
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your
watch. Also, we would recommend that you avoid placing your watch near
electronic devices that may generate large magnetic fields (radio, smartphone,
television, computer, tablet, loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resistance,
push the crown back to position 0. Never operate the crown underwater.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the watch and strap with fresh water. It is also recommended to have the water resistance of your watch checked every two years.
BELL & ROSS INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be
activated at the time of purchase by your approved Bell & Ross point of sale,
and presented every time an operation is performed. You can now access the
digital version of this card and all the information relating to your watch by
scanning the QR code or visiting:
www.bellross.com/warranty.
To ensure a service that meets the brand’s exacting standards, any servicing of your watch must be carried out by the Bell & Ross service centre or a watchmaker approved by Bell & Ross. The warranty does not, however, include:
- Any damage caused by accidents or by inappropriate or improper use of the watch (e.g. violent impacts, crushing, rough handling of the clasp).
- Any damage caused by repair or disassembly operations carried out by a retailer or after-sales service centre not approved by Bell & Ross.
- The consequences of the watch and bracelet/strap ageing and normal wear and tear.