TELLUR TLL151201 Fast Wireless Car Charger and Motorized Mount User Manual
- June 4, 2024
- Tellur
Table of Contents
Fast wireless car charger & motorized mount
TLL151201- User manual
INTO YOUR FUTURE
Thank you for choosing us!
Please read this user manual carefully before using the product.
Product specifications:
Input current: 9V / 1.67A, 5V/2A
Input port: USB Type-C
Cable length: 1m
Output power: Adaptive, 5W / 7.5W /10W [max 1.2A] Output current:
9V/1.2A,5V/1.5A
Protections: FOD[ Foreign Object Detection), Over Voltage, Over Current, Over
Temperature (808)
Material: ABS
Mounting: Air vent, Dashboard, Windshield
Available colors: Black
Product compatibilities: Fast charging is supported by:
iPhone 8/8 Plus/X/XS/XS Max/XR
Samsung $9/S9+/S8/S8+/S7/S7 edge/Note8/Note?/Noted
Standard wireless charging for all Qi-enabled devices
Note: Min. QC2.0 fast charger adapter required for fast wireless charging (not included)
Package includes:
1 x Wireless car charger & automatic mount
1x 1m Type-C Cable
1x Air Vent Mount
1 x Suction holder
Product dimensions: 126 x 70 x 21mm
Product weight: 100gr
Compatible devices:
All mobile phones without Qi standard will require an additional receiver (not
included)
Product overview
Installation steps
1. Air vent installation
Follow the arrows to install 4 parts| Adjust the screw cap to the best active status
2. Connect the wireless charger to the car adapter using the cable included
Min. QC2.0 fast charger adapter required for fast wireless charging (not included]
3. Press the button of the clip to fix it in the air vent, adjust the angle and tighten the fixed nut.
4. Place the smartphone
5. Take off the smartphone
Touch the on/off button on the left side, and the clips will automatically
open and you can ‘ take your phone out.
Notes
- Do not disassemble or throw into fire or water, to avoid causing a short circuit.
- Do not use the wireless charger in severely hot, humid, or corrosive environments.
- Do not place too close to objects with a magnetic stripe or chip (ID card, bank cards, etc.) to avoid demagnetization.
- Please keep a distance at least of 20 cm between implantable medical devices [pacemakers, implantable devices, etc.) and the wireless charger, to avoid potential interference.
- This product is not a toy, please keep it away from children to avoid unnecessary accidents.
The images from this manual are sketch maps, used for illustrating the instructions. The packet includes a wireless charger, power cable, and user’s manual. Disposal and recycling information The crossed-out wheeled bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries
ABN Systems International
Str. Marinariler, or.?9
Sector 1, Bucuresti, Ramanio
004,021,293, 09.95
officefatellur.com
officefdabnsystems.ra
wary. te lurcam
Declaration of conformity
We, ABN SYSTEMS INTERNATIONAL S.R.L., Bucharest, Sector 1, Marinarilor street,
nr. 31, as a producer, we declare on own responsibility that the product
below:
Product Description Brand Product code
Wireless car charger Tellur TLL151201
and motorized mount WCCM, black
It does not endanger life, health, or work safety, does not have a negative
impact on the environment and corresponds to the standards stated in the
manufacturer’s declaration of conformity.
The product is in compliance with the following standards and / or other
normative documents:
RED – 2014/53/EU
Applied standards:
EN 62311:2008
EN 62368-1:2006+A11:2009
A1:2010+A12:20114A2:2013
EN 301 489-1 V2.1.1 .,
EN 301 489-3 V2.1.1
EN 303 417 V1.1.1
RoHS – 2011/65/EU
The product bears CE mark, applied in 2018
Name: George Barbu Place and date: Bucharest
Function: General 20-12-2018 CH
manager Signed: }
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.