OUTSUNNY 842-266 26 in.Wx26 in.H Outdoor Steel Fire Pit Bonfire Instruction Manual

OUTSUNNY 842-266 26 in.Wx26 in.H Outdoor Steel Fire Pit Bonfire

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

ASSEMBLY & INSTRUCTION MANUAL

PARTS LIST

Tools Required: Allen Wrench (Included)

Assembly Instructions

Please check all packing material carefully before discarding, as some parts may be encased in the packing material

Step 1 Attach the Fire Bowl (A) to Base (B) by using Bolts (G) and Nuts (H). Fully tighten all bolts and nuts. Make sure all pieces fit together securely. Affix Lid Ring (D) to the Mesh Lid (C) by screwing the lid ring into the upper hole of the Mesh Lid (C) by using Nut (1).Then place the Mesh Lid (C) into the Fire Bowl (A).

Your fire pit is ready for using

WARNING:

FOR OUTDOOR USE ONLY

FOR YOUR SAFETY:

1. Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.
2. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment.
3.  Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury, or death.

OPERATING INSTRUCTIONS

Lighting

1. make sure there is only a small amount of ash in the bottom of the bowl.
2. place a layer of dry kindling or natural firestarter onto the center of the grate.
3. place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl.
4. use a match to light kindling or firestarter.
5. using hook and heat-resistant gloves, replace the spark guard once the kindling or firestarter is lit.

Extinguishing

1. Allow the fire to burn itself out.
2. DO NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fire pit.

CLEANING AND CARE

Inspecting
This outdoor fire pit should be inspected on a regular basis to ensure product safety and longer product life.

CAUTION: DO NOT attempt to inspect this outdoor fire pit until the fire is completely out.

1. Check handles to make sure they are secure.
2. Check components for any signs of damage or rust.
3. If damage to any components is detected, DO NOT operate until repairs are executed.

Cleaning

This outdoor fire pit should be inspected on a regular basis to ensure product safety and longer product life.
Note: After repeated use, a slight discoloration of the finish may occur.

CAUTION : DO NOT attempt to inspect this outdoor fire pit until the fire is COMPLETELY out.

• DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
•  DO NOT clean any part of this outdoor fire pit in a self-cleaning oven as it may damage the finish.

1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2. For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush.
3. Rinse clean with water.
4. Remove built-up creosote from components with a chimney cleaning product.

Storage

CAUTION: DO NOT move or store this outdoor fire pit until the fire is completely out.

1. Once the fire is out, coals are cold and outdoor fire pit is cool to the touch, remove ashes and properly dispose.
2. Store assembled in a location away from children and pets.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>