hager TYFS122 USB Data Interface Instructions
- June 4, 2024
- hager
Table of Contents
USB data interface
TYFS122
Version 5
or higher
6LE007510B /
82400201
User instructions
Function
The USB data interfaces allow a PC or another USB-port-equipped device, to get
in connection with the KNX Bus.
Hereafter, some application software examples needing access to the KNX Bus:
ETS software, visualization software, etc.
Preferably install the TYFS122 in your installation’s VDI box. Should the
installation not include a VDI box, make sure you observe the strong/weak
current separation.
The device must only be installed by a qualified electrician according to the
installation standards applicable in the country.
Conform to TBTS installation rules.
Technical characteristics
| • Supply voltage: | 5 VDC USB port |
|---|---|
| • Dimensions: | 2x 17,5 mm |
| • Protection class: | IP 20 |
| • Operating temperature: | -5 °C ⇒ + 45 °C |
| • Storage temperature: | -25 °C ⇒ + 70 °C |
| • USB-connection: | PC: USB – A |
TYFS122: USB – B
• Max. length USB cable:| 5m
• Transmission protocols:| USB 2.0
• Extended frame management:| 233 bytes
• KNX configuration mode and media:| KNX Data Secure TP + S-mode
Correct Disposal of this product
(Waste Electrical & Electronic Equipment).
(Applicable in the European Union and other European countries with separate
collection systems).
This marking shown on the waste or its literature indicates that it should not
be disposed of with other households’ waste at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this product from other types of waste and
recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this device for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes of disposal.
Usable in all of Europe and in Switzerland
A: USB connector (Typ B)
B: USB cable locker
C: KNX bus connection
Name and content of hazardous substances in products:
| Part name | Hazardous substances |
|---|
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent Chromium
(Cr6)| Polybrominated Biphenyls
(PBB)| Polybrominated
Diphenyl ethers
(PBDE)
Electronic Board| X| 0| 0| 0| 0| 0
This table is prepared in accordance with the provisions of SJ / T 11364
0: indicates that said hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement of GB / T
26572.
X: indicates that said hazardous substance contained in at least one of
the homogeneous materials used for this part is above the limit requirement of
GB / T 26572.
The Regulatory Compliance Mark (RCM) is a trademark owned by the electrical
regulator (Regulatory Authorities (RAs)) and the Australian Communications
Media Authority (ACMA).
China
RoHS logo. Equipment containing certain substances that are forbidden under
the China RoHS directive, but which can be used with complete safety during
the environmental protection use period. This period is indicated by the
number in the logo, expressed in years.
Hager Controls S.A.S.,
33 rue Saint-Nicolas, B.P. 10140,
67703 SAVERNE CEDEX, France
www.hager.com
Hager 02.2022 – 6LE007510B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>