Shenzhen Xinrui Weiye Electronics Co Ltd SA00004-1 Wireless Control Switch Instruction Manual
- June 4, 2024
- Shenzhen Xinrui Weiye Electronics Co Ltd
Table of Contents
Shenzhen Xinrui Weiye Electronics Co Ltd SA00004-1 Wireless Control
Switch
Product Information
Specifications
- Product Model: SA00004-1
- Operating Voltage: DC3V (one 2032 button battery)
- Operating Current: Less than 20mA when transmitting
- Operating Frequency: 433.92MHz
- Operating Temperature: -30°C to 70°C
- Operation Life: >10000 times
- Standby Current: Less than 1A
- Size: 61.5mm x 29mm x 12mm
Product Usage Instructions
- Ensure the remote control is powered by a single 2032 button battery with a DC voltage of 3V.
- Maintain the operating current below 20mA when transmitting signals to the device.
- Operate the remote within an effective range of 433.92MHz frequency.
- Keep the remote within the temperature range of -30°C to 70°C for optimal performance.
- The remote has an operation life of more than 10,000 times, providing long-lasting usage.
- During standby mode, ensure the remote consumes less than 1A of current to preserve battery life.
- The compact size of the remote (61.5mm x 29mm x 12mm) allows for easy handling and storage.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the remote control response time is slow?
A: If you experience slow response time, try replacing the battery with a new one to ensure optimal performance. -
Q: Can I use rechargeable batteries with the remote control?
A: It is recommended to use a single 2032 button battery with a DC voltage of 3V for best results. Rechargeable batteries may not provide consistent performance. -
Q: What is the maximum range of the remote control?
A: The effective range of the remote control is dependent on environmental factors, but it typically operates within a range of up to 30 meters.
Pictures of objects
Parameters
- Product Model: SA00004-1
- Operating voltage: DC3V (one 2032 button battery)
- Operating current: less than 20mA when transmitting
- Operating frequency: 433.92MHz
- Operating Temperature:- 30℃～70℃
- operation life: >10000times
- Standby current: less than 1μA
- Size: 61.5mm29mm12mm
- Remote control response time: <5ms
Instructions for operation
- Press the ON button, the indicator light is red, send signal, open the machine, release to stop sending.
- Press the OFF key, the indicator light is red, send signal, close the machine, release to stop sending.
- When the emission indicator light is slightly bright, it indicates that the battery voltage is low, and it is necessary to replace a new battery.
Application production scene:
- wireless mouse.
- remote control toys.
- Smart furniture. , etc.
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>