Shenzhen huayitai Technology Co Ltd Z6 Wireless Speaker Instruction Manual

Shenzhen huayitai Technology Co Ltd Z6 Wireless Speaker Instruction Manual

Before operating this unit, please read this manual carefully and keep it for future reference.

Product Features

1. Support Wireless music playback
2. Support Wireless reconnection function
3. Support lighting control of different colors
4. Support TF card, U disk, FM
5. Support TF card capacity not exceeding 32G

Specifications

1. Product parameters:
2. Maximum output power: 5W*2
3. Product size: about L200XW115XH82mm
4. Rated voltage DC 3. 7V
5. Wireless frequency 2.4GHz
6. Charging voltage DV-5V 1A
7. Charging time 3±0.5 hours
8. Audio playback time at moderate volume is about 6 hours Audio

Charge:

1. The Mrico USB interface is connected to an external 5V/1A charger. When charging, the red indicator light will light up at the MIC hole.
2. This machine has a built-in rechargeable ion battery, please charge it before use.
   Note: When the device is turned off, it takes about 3 hours to fully charge, and when it is in working mode, it takes about 6 hours to fully charge. (When fully charged, the MIC hole position still displays red)

Function Overview

FCC WARNING

This device complies with part 15 Of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, inducing interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference ill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of following remeasures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>