GA Plumbing I8 Wi-Fi Underfloor Heating Thermostat User Manual

GA Plumbing I8 Wi-Fi Underfloor Heating Thermostat

Specifications

• Product Model: I8 Thermostat
• Thermostat Types:
  • GA Plumbing 3A
  • GB Electric Heating 16A
  • GC Linkage, Gas Boiler 3A
  • GE Water Heating 3A + Linkage, Gas Boiler 3A

Product Usage Instructions

Installation Procedure

1. Connect the power supply box according to the wiring diagram.
2. Push the panel up and take down the panel.
3. Install the fixed plate of the thermostat in the electrical connection box with screws.
4. Make the panel buckle to the fixed plate and push it down.

Operating Instruction

1. Power on/off: Long press the M button for 5 seconds to turn on/off the thermostat.
2. Press the M button to switch between manual and automatic modes.
3. Long press the M button and key to enter the clock setting, press the M button to switch Settings Item, press and the d key to adjust the value of each parameter.
4. Press and for 5 seconds to add or cancel the child lock.
5. WIFI link: Long press the button for 5 seconds to enable a WIFI connection.

Advanced Options

• When POWER OFF, press the M key and the key for 5 seconds to enter the advanced option setting.
• Press M to enter the next option, press and to adjust, and long press M to exit the option.

Frequently Asked Questions

Q: Can I use this thermostat for gas boilers?

A: Yes, this thermostat supports gas boilers with compatible models. Refer to the product model specifications for more details.

Q: How do I switch between manual and automatic modes?

A: Press the M button on the thermostat to switch between manual and automatic modes.

Q: How do I set up a WIFI connection on the thermostat?

A: Long press the designated button for WIFI connection setup as per the operating instructions provided.

Dear customer,

• Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference.
• Pay particular attention to the safety instructions.
• If you have any questions or comments about the device, please contact the customer line.
• ✉www.alza.co.uk/kontakt
• ✆ +44 (0)203 514 4411
• Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Welcome

Thank you for your trust and support. By adopting higher-end technology and more perfect technology, your new thermostat will provide you with the right temperature environment every day in the future, making your life more comfortable and your living environment more stylish and beautiful. For detailed instructions on the installation and use of this thermostat, please read this manual carefully.
Please contact a professional to install the thermostat for you and install and use the product to the extent permitted by law.

Application

• An intelligent digital temperature controller is a floor heating system suitable for room temperature control and household temperature control.
• It controls the operating state of the floor heating equipment by comparing the ambient temperature with the set temperature, which improves comfort and achieves energy saving.
• This digital temperature controller adopts microcomputer control technology and is equipped with full-screen display touch buttons, which is elegant in design and easy to use.
• The thermostat has manual automatic, programmable and state memory functions.

Product packaging

• Thermostat host x 1
• Qualification certificate x 1
• Sensing line (optional) x 1
• Manual x 1
• Screw x 1

Product Model

• GA Plumbing 3A
• GB Electric Heating 16A
• GC linkage, gas boiler 3A
• GE Water heating 3A + linkage, gas boiler 3A

User Notes

1. Please read this manual carefully. Improper operation may damage the product or cause dangerous conditions.
2. The installation personnel must be well-trained and experienced service technicians.
3. After installation, please read this manual carefully and operate the product according to the instructions.

Caution: Risk of electric shock or equipment damage.

Wiring Diagram

Note: GA for water heating; GB for electric heating; GC for gas boiler; GE Water heating 3A + linkage, gas boiler 3A

Installation procedure

This product is installed with a standard 86 control switch (in compliance with European regulations)

1. Connect the power supply box according to the wiring diagram.
2. Push the panel up and take down the panel.
3. Install the fixed plate of the thermostat in the electrical connection box with screws.
4. Make the panel buckle to the fixed plate and push it down.

Description of display & Icon

Operating Instruction

1. Power on/off: Long press M for 5 seconds on/off the thermostat.
2. Press the M key to switch between manual and automatic modes.
3. Long press the M key and key to enter the clock setting, press the M key to switch Settings Item, press and the d key to adjust the value of each parameter.
   • Note: the time of the WIFI model will automatically get internet time.
4. Press for 5 seconds to add or cancel the child lock.
5. WIFI link: When the thermostat is on, long press the button for 5 seconds and the thermostat display will come out. Now the WIFI icon flashes, at this time the thermostat into the state of code.

Advanced Options

• When POWER OFF, press the M key and the key for 5 seconds to enter the advanced option setting.
• Press M to enter the next option, press and to adjust, and long press M to exit the height Level option.

1| Temperature compensation| The default value of the calibration room temperature is -2°C. Press the up and down keys to adjust. The adjustable range is 9.9°C to -9.9°C.
---|---|---
2| Sensor selection| The temperature sensor is selected as IN by default. Press the up and down keys to adjust as IN respectively, indicating that the internal.
3| Modify the temperature limit| The default temperature limit value is 35°C. Press the up and down keys to adjust the range from 5°C to 60°C.
4| Temperature difference start| The default temperature difference is set to 1°C.

Press the up and down keys to adjust the range to 1-10 degrees.

5| Antifreeze function| Set the default anti-freeze function to OFF, display OFF, and press the up key to turn on the anti-freeze and display ON.
6| Holiday option and turn off weekly programming (apologetic)| Set the default rest day as double OFF. Press the up and down keys to adjust it to double OFF (1-5) single OFF (1-6), no OFF (1-7) and turn off week programming (OFF).
7| Primary and secondary reverse selection| Set the default main and auxiliary reversal to 0. Press the up and down keys to adjust 0 to turn off the main and auxiliary reversal. 01 means auxiliary reverse, 02 means auxiliary reverse, 03 means main and auxiliary reverse, shutdown and antifreeze are not on, stop output
8| Passive linkage output delay time (apologetic)| Set the default passive linkage delay time to 0. Press the up and down keys to adjust the range of 0-5 minutes.
---|---|---
9| Set upper-temperature limit| The default value of the set temperature upper limit is 60°C and the adjustment range is 35-95°C by pressing the up and down keys.
10| Restore Factory Defaults| Set to restore the factory default setting to display “-“ Press the up button to adjust the display “—”, press the enter button to restore the factory settings.

Technical Data

• Temperature sensor NTC
• Temperature accuracy ±1°C
• Power consumption <1W
• Voltage AC 95 ~ 230V 60Hz
• Load current 3A/16A
• Temperature setting 5~60°C

About WIFI connection

• Before using the WIFI thermostat for the first, you should set the WIFI signal and configuration through your smartphone or tablet to allow communication between your connected devices.
• WIFI Link: For the Bluetooth thermostat, please turn on the Mobile phone Bluetooth.

1. Download the APP search for “Tyua” in the App market or scan below QR code below to download.

2. Register Account if you don’t have an APP account yet, you can choose to register or log in via SMS verification code. Click “Create a new account”, and you will enter the Tuya Smart Platform Privacy Policy page. After you click Agree, you will officially
   enter the mobile phone registration page.

   • The system automatically determines the current country/region. You can also select the country/region manually. After entering your mobile phone number or email address, click “get verification code”. Enter the received verification code, then enter the password, and click “Finish” to register successfully.

3. Add device Click “add device” or “+” on the top right of the APP homepage to enter the “add device” page. Currently, there are two ways to manually add a device and search device.

   • Find the thermostat product (WIFI model) in the device list. In the specified network mode, the indicator flashes (slowly flashes) and then clicks the confirm button on the page.
   • Select the device’s work area to connect to the WIFI of the internet and enter the WIFI password. Click “ok” to enter the matching network process.
   • If the default mode distribution network is selected, the distribution process APP is shown in Figure 1 below, and the distribution network successfully displays the interface shown in Figure 2.
   • The name of the device can be changed or the location of the room can be selected.
   • If the distribution network fails, the APP will display the page shown in the figure below. You can choose to add or view the help again.
   • Note: if the connection fails, please confirm whether the temperature control device has entered the code-matching state, refer to item 6 of the operation manual.

4. Display of temperature controller APP interface.

Warranty Conditions

• A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment complies with the essential requirements and other relevant provisions of EU directives.

WEEE

This product must not be disposed of as normal household waste under the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product.
Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines under national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>