HUAWEI CTR-LX3 Smart Phone User Guide

: June 4, 2024
: Huawei

Table of Contents

CTR-LX3 Smart Phone
Safety Information
Disposal and recycling information
FCC Regulatory Compliance
FCC statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CTR-LX3 Smart Phone
User Guide

CTR-LX3
96727484-01

CTR-LX3 Smart Phone

Follow the instructions in the following figures to set up your device.
Single-SIM card:
Dual-SIM card:

Before using the device, familiarize yourself with its basic operations.

To power on your device, press and hold the power button until the screen turns on.
To power off your device, press and hold the power button, and then touch ****the screen.
To restart your device, press and hold the power button, and then touch **** it.
Be careful not to scratch your device or hurt yourself when using the eject pin.
Please use the eject pin that came with your device to set up the device.

For more information about usages and functions, review and download the latest Quick Start Guide and User Guide at https://consumer.huawei.com/latin/support/.

Safety Information

To prevent possible hearing damage, do not listen at a high volume for long periods.
Ideal temperatures: 0°C to 35°C for operating, 20°C to +45°C for storage.
Avoid using the device in a dusty, damp, or dirty place, or near a magnetic field.
When charging, an adapter should be plugged into a socket nearby and easily accessible. Use approved power adapters and chargers.
Unplug the charger from electrical outlets and the device when not in use.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injury. The built-in battery in your device should be serviced by Huawei or an authorized service provider.
Keep the battery away from fire, excessive heat, and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
Ensure that the power adapter meets the requirements of Annex Q of IEC/EN 62368-1 and has been tested and approved according to national or local standards.

For more safety information, see “Safety Information” in the latest Quick Start Guide.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://consumer.huawei.com/en/.
RF Exposure Information
For details about the SAR values, see “RF Exposure Information” in the latest Quick Start Guide downloaded from Huawei’s official website.

For countries that adopt the SAR limit of 2.0 W/kg over 10 grams of tissue: The device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body.
For countries that adopt the SAR limit of 1.6 W/kg over 1 gram of tissue: The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body.

FCC Regulatory Compliance

Body-worn operation
The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using it at the ear is

CTR-LX3 …………………. 0.85 W/kg
And when properly worn on the body is
CTR-LX3…………………. 0.85 W/kg
And when using the Wi-Fi hotspot function is
CTR-LX3…………………………. 0.85 W/kg

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not expressly approved by Huawei Device Co., Ltd. for compliance could void the user’s authority to operate the equipment.
Mexico Compliance (This section is only applicable to Mexico)
The operation of this device is subjected to the following two conditions: (1) This device may not cause harmful interferences; and (2) this device must accept any interferences, including those that may cause an undesired operation.

*The device IMEI can be obtained by dialing #06#.**
To use the FM radio function, please connect wired earphones first.
For information about the IFT certification, visit https://consumer.huawei.com/certification/.