Einhell TC-PW 610 Air Hammer Screwdriverr Instruction Manual

: June 4, 2024
: Einhell

Table of Contents

Einhell TC-PW 610 Air Hammer Screwdriverr
Product Information
Product Usage Instructions
FAQ
Safety regulations
Layout and items supplied
Technical data
Operation
Cleaning, maintenance and ordering of spare parts
Service Information
Warranty certificate
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Einhell TC-PW 610 Air Hammer Screwdriverr

Product Information

Specifications

Model: TC-PW 610
Operating Instructions Languages: German, English, French, Italian, Swedish, Dutch, Spanish, Slovenian, Greek
Art.-Nr: 41.389.60
Date: 12.10.2023

Product Usage Instructions

Read the user manual to reduce the risk of injury.
Check for packaging and transport protections.
Wear necessary protective gear like safety glasses when operating the tool. Follow safety regulations.
Attach or remove the tool using the quick-release mechanism.
Connect the tool to an air supply using a quick coupling (hose not included).
Clean the tool after each use.
Follow maintenance procedures as indicated in the manual.
Order spare parts with the necessary details provided.

FAQ

Q: Where can I find current prices and information for spare parts?
A: Visit www.Einhell-Service.com for up-to-date pricing and information on spare parts.

SYMBOLS

Danger! – Read the operating instructions to reduce the risk of injury
Caution! Wear ear-muffs. The impact of noise can cause hearing damage.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.
Each time before use, oil the compressed air tool via the compressed air coupling.
Direction of rotation
Torque selector

Danger!
When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care.
Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well. We cannot accept any liability for damage or accidents that arise due to a failure to follow these instructions and the safety instructions.

Safety regulations

The corresponding safety information can be found in the enclosed booklet.
Danger!

Read all safety regulations and instructions.
Any errors made in following the safety regulations and instructions may result in an electric shock, fi re and/or serious injury.
Keep all safety regulations and instructions in a safe place for future use.
Protect yourself and your environment from risks and accidents by taking the appropriate precautionary measures.

Layout and items supplied

Layout (Fig. 1-4)

Trigger lever
Switch for setting forward/reverse rotation and the torque
Square driver mount for connector
Nipple
Oil bottle (without oil)
Plug-on attachments (sizes: 8 mm, 10 mm, 11 mm, 13 mm, 17 mm, 19 mm, 21 mm, 22 mm, 24 mm, 27 mm)
Extension attachment

Einhell-TC-PW-610-Air-Hammer-Screwdriverr-FIG-1

Items supplied
Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service centre or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions.

Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport damage.
If possible, please keep the packaging until the end of the guarantee period.

Danger!
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating!

Pneumatic impact driver
Nipple
Oil bottle (without oil)
Plug-on attachments (10 items)
Extension attachment
Original operating instructions
Safety information

Proper use
The impact driver is a handy, pneumatically operated tool designed for DIY applications. It is suitable for fastening and releasing threaded connections.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Remember
Too small a diameter of the hose and too long a hose line will result in loss of power.

Technical data

Max. loosening torque ………………………..610 Nm
Max. torque ………………………………………610 Nm
Working range (max. thread size) ……………. M19
Max. permissible working pressure ……… 6.3 bar
Idling speed ………………………………….7000 min-1
Square drive mount …………….12.7 mm (1/2 inch)
Air consumption ……………………………. 198 l/min.
Recommended hose diameter ………………. 9 mm
Weight …………………………………………………..2 kg

Sound and vibration
Sound and vibration values were measured under EN ISO 15744.

LpA sound pressure level …………………… 94 dB(A)
KpA uncertainty ………………………………………3 dB
LWA sound power level …………………… 105 dB(A)
KWA uncertainty ………………………………………3 dB

Wear ear-muffs.

The impact of noise can cause hearing damage.
Total vibration values (vector sum of three directions) were determined under EN ISO 15744 and EN ISO 28927-2.
Vibration emission value ah = 4.4 m/s2
K uncertainty = 1.5 m/s2
The specified vibration value was established under a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances.
The specified vibration value can be used to compare the equipment with other electric power tools.
The specified vibration value can be used for the initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a minimum

Only use appliances that are in perfect working order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever necessary.
Switch the appliance off when it is not in use.
Wear protective gloves.

Caution!
Residual risks
Even if you use this electric power tool under instructions, certain residual risks cannot be ruled out. The following hazards may arise in connection with the equipment’s construction and layout:

Lung damage if no suitable protective dust mask is used.
Damage to hearing if no suitable ear protection is used.
Health damage is caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and maintained.

Before starting the equipment

Before you connect the equipment to the power supply make sure that the data on the rating plate are identical to those of the supply voltage.
Disconnect the compressed air supply before performing any cleaning, adjusting and maintenance work.

Air supply

Via a compressed air source with a pressure setting function, e.g. a compressor. Before starting up, please also read the section on care and maintenance.

Performance values of the compressor

The compressor used should have a tank volume of at least 50 litres.

Setting values for work with the suction spray gun

Set a maximum working pressure of 6.3 bar at your compressed air supply.

Remember

Wear the necessary protective clothing, in particular safety goggles, when working with the screwdriver.
Pay attention to the safety regulations.

Lubricating the tool
Each time before starting and during prolonged operation:

Insert 3-5 drops of special compressed air oil into the compressed air connection (5) (not included in delivery)
Let the equipment run briefly so that any surplus oil is blown out.

Inserting/removing a tool

Fit the required drive socket insert by pushing onto the square drive mount (3).
Remove the drive socket insert by pulling it off the square drive mount (3).

Operation

Connecting to a compressed air supply

Connect the nipple (5) to the quick-lock coupling of a compressed air hose (the hose is not supplied).
Note the maximum permissible operating pressure of the equipment.

Rotational direction switch/ torque switch

You can select counter-clockwise or clockwise rotation and the torque using the rotational direction switch (2).

Low torque
Medium torque
High torque

Important!
To avoid gear damage, make sure that the tool has come to a complete stop before you change the direction of rotation.

Working with the impact driver Loosening

Set the direction of the rotational direction switch (2) to counter-clockwise.
Mount a drive socket insert on the impact driver (see point 5.2).
Place the impact driver on the screw/nut and press the trigger lever (1).
If the screws/nuts are very tight or if they are rusted, use a tyre wrench or torque wrench to slightly loosen them.

Tightening

Warning! Use the impact driver only for loosening screws/nuts. If you want to use the impact driver to tighten screws and nuts, you must also use a torque limiter which is designed for this purpose. If not, the screw connection may be damaged. The torque limiter is available from your dealer. It is not included in the scope of this delivery.
Prior to tightening, carefully insert the screw/ nut into the threads.
Screws/nuts with special torque specifications (for example provided by the vehicle manufacturer in the automotive sector) must be tightened only with a suitable torque limiter.

Danger!
Screws/nuts must be finish-tightened with a torque wrench which is set to the torque specified by the manufacturer and then they must be checked!

Cleaning, maintenance and ordering of spare parts

Disconnect the compressed air supply from the equipment before performing any cleaning work.

Cleaning

Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure.
We recommend cleaning the equipment immediately each time after use.
Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents; these may be aggressive to the plastic parts in the equipment.
Ensure that no water can get into the interior of the equipment.

Maintenance Warning!

Disconnect the equipment from the compressed air supply before you carry out any maintenance or cleaning work.
Compliance with the maintenance instructions listed here will help this quality product provide you with long service life and trouble-free operation.

Regular lubrication is essential for your equipment to work properly for a prolonged time.
Regularly check the speed and the vibration level by simply observing the tool.
Note: Use environmentally friendly compressed air oil if you want to operate the equipment outside the workshop.
The following lubrication options are available:

Lubrication by mist oiler
Connect a mist oiler between the compressed air source and the equipment (not supplied, available at retail stores)

By hand
Each time before using the compressed air tool insert 3-5 drops of special compressed air oil into the compressed air connection. If the compressed air tool has not been used for several days you must insert 5-10 drops of special compressed air oil into the compressed air connection before switching on. Store your compressed air tool only in a dry room.

Other maintenance
There are no other parts inside the equipment which require maintenance.

Excluded from the guarantee are

Wear parts
Damage cause by too much operating pressure.
Damage caused by non-conditioned compressed air.
Damage caused by improper use or unauthorized intervention.

Ordering replacement parts
Please quote the following data when ordering replacement parts:

Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required For our latest prices and information please go to www.Einhell-Service.com

Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection centre for proper disposal. If you do not know the whereabouts of such a collection point, you should ask your local council offices.

Storage
Store the equipment and accessories in a dark and dry place at above-freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original packaging. The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of Einhell Germany AG.
Subject to technical changes

Service Information

We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Category	Example
Wear parts*	Connector
Consumables*	Plug-on attachments, extension
Missing parts

Not necessarily included in the scope of delivery!

In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com.
Please ensure that you provide a precise description of the problem and answer the following questions in all cases:

Did the equipment work at all or was it defective from the beginning?
Did you notice anything (symptom or defect) prior to the failure?
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.

Warranty certificate

Dear Customer,
All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that this equipment develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the service number shown. Please note the following terms under which guarantee claims can be made:

These guarantee terms apply solely to consumers, i.e. natural persons, who do not want to use this pro-duct in connection with either their commercial or other self-employed activities. These guarantee terms regulate additional guarantee services which the undermentioned manufacturer promises to buyers of its new products in addition to their statutory rights of guarantee.Your statutory rights of guarantee are not aﬀected by this guarantee. Our guarantee is free of charge to you.
The guarantee services cover only defects due to material or manufacturing faults on the new product which you have bought in the European Union from the undermentioned manufacturer and are limited to either the rectiﬁ cation of said defects or the replacement of the product, whichever we prefer. Please note that only equipment under the brand name “Professional” has been designed for use in commercial, trade or professional applications. For all other products the guarantee is invalidated if the equipment is used within the guarantee period in commercial, trade or industrial applications or for other equivalent activities.
Our guarantee does not cover:
- Damage to the equipment caused by failure to comply with the installation/assembly instructions or by unprofessional installation; damage caused by failure to comply with the operating instructions (e.g. connection to the wrong mains voltage or current type); damage caused by failure to comply with the maintenance and safety regulations; damage caused by exposing the equipment to abnormal environ-mental conditions; damage resulting from poor care and maintenance.
- Damage to the equipment caused by misuse or incorrect applications (e.g. overloading the equipment or using non-approved attachments or accessories); damage caused by foreign bodies (e.g. sand, stones, dust, ….) getting inside the equipment. Damage in transit; damage caused by force or external influences (e.g. by dropping the equipment).
- Damage to the equipment or parts of the equipment which is owed to use-related, normal or otherwise natural wear. For example, batteries and battery packs are manufactured with a cycle limit for design-related reasons. Wear is negatively influenced in particular by load demands and charging speeds as well as exposure to heat, cold, vibration and impact.
The guarantee is valid for a period of 2 years starting from the purchase date of the equipment. Guarantee claims must be submitted before the end of the guarantee period and within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guaran-tee period remains applicable to the equipment even if repairs are carried out or parts are replaced. In such cases, the work performed or parts ﬁ tted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or for any replacement parts ﬁ tted. This also applies if on-site service is used.
To assert your guarantee claim, register the defective equipment at: www.Einhell-Service.com. You will need to provide proof of purchase of the new item of equipment. Equipment returned without such proof or without a rating plate are excluded from the guarantee services because of the lack of traceability. If the defect is covered by our guarantee, then either the item in question will be repaired immediately and retur-ned to you or we will send you a new replacement.
If you have taken the equipment with you to a diﬀ erent EU country than where you bought it, we will arran-ge for a local service partner to provide the guarantee services. If you take the equipment outside the EU, the guarantee will not apply.

Of course, we are also happy to oﬀ er a chargeable repair service for any defects which are not covered or no longer covered by the scope of this guarantee. To take advantage of this service, please send the equipment to our service address. We draw attention to the restrictions of this guarantee concerning wear parts, consumab-les and missing parts as presented in the service information included in this operating manual.
Warrantor/ Service
Einhell UK Ltd, Unit 10, 1st Floor, Champion‘s Business Park, Arrowe Brook Road, Upton, Wirral, CH49 0UQ

Declaration of conformity: We declare conformity in accordance with the EU directive and standards for article

*Druckluft-Schlagschrauber (Pn) TC-PW 610 (Einhell)**

Einhell-TC-PW-610-Air-Hammer-Screwdriverr-FIG-13

Standard references: EN ISO 11148-6

Einhell-TC-PW-610-Air-Hammer-Screwdriverr-FIG-14

Declaration of conformity

We, Einhell UK Ltd

Champions Business Park, First Floor Unit 10, Arrowe Brook Rd, Upton, Wirral CH49 0AB, United Kingdom declare the conformity to UK standards and legislation was assessed for:

Impact Wrench (Pneumatic) TC-PW 610 Set (Einhell)

Einhell-TC-PW-610-Air-Hammer-Screwdriverr-FIG-15