cobuilder KKplus s2 Sheets Endless User Guide
- June 4, 2024
- cobuilder
Table of Contents
cobuilder KKplus s2 Sheets Endless
Specifications
- Manufacturer: Kaimann GmbH
- Product Trade Name: Kaiflex KK plus sheet
- Product ID: (In case of numerous, use Appendix 1)
Product Usage Instructions
-
Step 1: Preparation
Ensure that you have the necessary tools and equipment ready for installation. -
Step 2 : Installation
Follow the installation guidelines provided in the product manual to correctly install the product. -
Step 3 : Testing
After installation, perform any required tests to ensure the product functions as intended. -
Step 4 : Maintenance
Regularly check and maintain the product according to the maintenance instructions to prolong its lifespan.
FAQ
-
Q: What should I do if the emissions from the product exceed the limits?
A: If the emissions exceed the limits, contact the manufacturer for guidance on the next steps to take. -
Q: Are there specific storage requirements for this product?
A: Store the product in a dry and cool environment away from direct sunlight to maintain its quality.
BREEAM-NOR v6.0 Self-declaration Hea 02 Indoor air quality – emission level
Other products
Requirements as per the latest updated version of BREEAM-NOR v6.0 which can be
found on https://byggalliansen.no/.
Self-declaration that the named construction product complies with the emission level for indoor air quality in BREEAM-NOR v6.0 in accordance with Hea 02 performed on the object
- MANUFACTURER:
- Kaimann GmbH
- PRODUCT TRADE NAME
- Kaiflex KKplus s2 sheet
- PRODUCT ID : (In case of numerous, use Appendix 1)
- see appendix 1
This form must be filled out and signed by a legally responsible person for
the construction product manufacturer, if the product is within the given
emission limits of the current standard.
The declaration applies to the following products
- Wood-based products (including wood flooring)
- Flooring materials (including floor levelling compounds)
- Ceiling, wall, and acoustic and thermal insulation materials
- Interior adhesives and sealants (including flooring adhesives)
Documentation which can serve as basis for the self-declaration could be emission tests and/or test reports which prove that the product fulfills the standards, and the emission limits the manual requires. If in doubt, the manufacturer must consult with their own internal and external experts. Providing incorrect and deceptive information can have legal consequences. The filled-out form should be signed by a legally responsible person for the manufacturer.
- It is confirmed that emissions from the product do not surpass the limit given in Table Hea 02-01
- It is confirmed that emissions from the product do not surpass the limit given in Table Hea 02-02
This form is developed by Skanska, NCC, Peab and Hent, etc. It is freely distributed via Cobuilder. Users of the form are solely responsible for ensuring that the version and contents of the form are correct. Skanska, NCC, Peab, Hent or Cobuilder AS cannot be held responsible for any possible errors. Filled-out forms are not an official approval from Skanska, NCC, Peab, Hent or Cobuilder.
- The supporting documents must be easily accessible in the case of a possible inspection by an auditor.
- This form is developed by Skanska, NCC, Peab and Hent, etc. It is freely distributed via Cobuiider. Users of the form are solely responsible for ensuring that the version and contents of the form are correct. Skanska, NCC, Peab, Hent or Cobuilder AS cannot be held responsible for any possible errors. Filied-out forms are not an official approval from Skanska, NCC, Peab, Hent or Cobuilder.
- The supporting documents must be easily accessible in the case of a possible inspection by an auditor.