ROAN Sol Lux Choco-Rose Gold Instruction Manual

ROAN Sol Lux Choco-Rose Gold

WARNINGS : IMPORTANT!
READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE

1. Never leave your child unattended.
2. Ensure that all the locking devices are engaged before use.
3. To avoid injuries, make sure the child is kept at a distance when the product is being unfolded or folded.
4. Do not allow the child to play with the product.
5. Use the harness when the child starts to sit by itself.
6. The seat unit is not intended for children aged below 6 months.
7. Always use the harness system.
8. Check if the fixing mechanisms of the carrycot, stroller, and the car seat are properly fixed before use.
9. This product is not intended for running or rollerblading.
10. This product is intended for children who cannot sit unattended, change positions or move on hands and knees. Maximum weight of the child: 9kg (concerns carrycot)
11. Always secure the brake when the stroller is parked.
12. The maximum load of the basket is 3 kg.
13. The maximum load of the bag is 2 kg.
14. Any load on the handles, backrest or sides of the stroller may influence its stability.
15. Use only original parts, approved by the manufacturer.
16. Do not use the stroller on steps.
17. This product is intended for children since birth up to 4 years of age or a maximum weight 22 kg.

WARRANTY TERMS AND CONDITIONS

1. P.P.UH ROAN grants a 12-month warranty for the purchased product starting from the purchase date.

2. Any complaints shall be reported to the sale point, where the product was purchased.

3. Warranty card must be presented to admit the complaint.

4. Physical defects of the product detected during the warranty period should be removed free of charge within 14 days of the product delivery through the agency of the seller to P.P.U.H. ROAN.

5. Repairs are carried out by P.P.U.H. ROAN or the service provider indicatedby the seller.

6. The warranty does not cover, damages caused by the user damages due to failure to follow recommendations, warnings, and limitations included in the user manual and on the product components naturally wearing off components, such as, tyres, inner tube, tyre thread, materials used on handles, structure and colour of fabrics, ma­terials exposed to abrasions, bushing in tyres, and printings damages resulting from failure to follow maintenance conditions, e.g.,
   corrosion, change of the upholstery colour or colour of plastic elements due to long term exposure to sunrays or too low temperatures, any looseness, noises such as squeaking/creaking, damages to mechanisms due to dirt damages caused by repairs carried out by unauthorized persons vibrations of the wheels on uneven surfaces is a normal phenomenon for this type of construction. To minimize vibrations, use blockades on the wheels for straight ride. damages and grime resulting from improper packaging of the product during shipment by courier company (in the case of mail ordering). The product must be packed into an original cardboard or its substitute adjusted to the size of the product so there is no unnecessary loose space, and so that no component sticks out or make buldge in the packaging.

7. Warranty period is extended by the time of repair.

8. Manner of repair is determined by the party granting the warranty.

9. Product under the complaint should be provided clean.

10. The warranty covers the territory of the European Union.

11. The warranty covers the territory of the country in which the stroller was bought.

MAINTENANCE

1. The product requires periodic maintenance.
2. Metal elements of the stroller may be cleaned with a wet cloth and use of a mild cleaning agent to prevent corrosion. Dry after cleaning.
3. The upholstery of the stroller may be cleaned with a wet cloth and use of a mild cleaning agent. After cleaning, dry the upholstery hanging it in the place where it is not exposed to sunrays for a long time, or leave it unfolded in a well-ventilated area.
4. Do not wash the elements of the upholstery in the washing machine or do not whirl it mechanically.
5. Do not use bleach. Use only mild cleaning agents.
6. Do not expose the product to sunrays for a long time as the upholstery and plastic components may be damaged.
7. Movable components should be periodically maintained with use of agents such as WD-40.
8. Check regularly location of the safety belts and other adjustable elements.
9. Do not use grease in places to which sand may enter. Check regular location of the safety belts and other adjustable elements.
10. Avoid contact with salty water (sea water, sea breeze, road salt) as it may cause corrosion.

UNFOLDING THE STROLLER

To unfold the stroller, place it flat on the ground (fig. 1), then move the stroller folding security mechanism (fig. 2) and pull the handle up with a decisive movement (fig. 3) until the stroller folding mecha­nisms are locked in place (fig. 4).

ASSEMBLY AND DISASSEMBLY OF REAR WHEELS

To assemble the rear wheels, first insert the half shafts into the rear brake bar (fig. 5) until they are locked in place (fig. 6). Then insert the wheels on the half shafts until you hear a clicking sound. To dis­assemble the rear wheels, press the button in the central part of the wheel (fig. 7) and disassemble the wheel. Then press the button located below the brake bar (fig. 8) to remove the half shaft.

ASSEMBLY OF FRONT SWIVELLING WHEELS

Insert front set of the wheel onto the hub (fig. 9) until it is locked in place (you will hear a clear click sound, (fig. 10). Make sure the wheel is properly secured. Repeat the steps for the second wheel. Front wheels are equipped in a locking mechanism that can lock them to ride forward only. To lock the wheel, turn the ring of the locking mechanism outside (symbol of the locked padlock, (fig. 11 ).

DISASSEMBLY OF FRONT SWIVELLING WHEELS

Press the button of the wheel locking mechanism (fig. 12) and slide the wheel off the hub (fig. 13). Repeat the steps for the second wheel.

HANDLE HEIGHT ADJUSTMENT

The stroller’s handle is adjustable. To change its height, press round buttons on both sides of the handle and then adjust it to the desired height (fig. 14).

PARKING BRAKE

The pram is equipped with a rear parking brake. To engage the brake, press its lever down (fig. 15). In order to disengage it, lift the lever. NOTE! Before starting to push the pram, make sure that the brake has been disengaged.

NOTE!

• Always engage the safety brake, when you leave the pram on an inclined surface.
• The brake is not designed for slowing down. It should be engaged after the pram has been stopped completely.
• The pram is not designed for running.

ASSEMBLY AND DISASSEMBLY OF THE CARRYCOT

• To assemble the carrycot, press it down against the frame of the stroller so that the adapters on both sides of the carrycot lock in the adapters located on the stroller frame (fig. 16, 17). They will be automatically locked.
• To disassemble the canrycot, pull the handles located on the adapters of the carrycot (fig. 18).
• The carrycot can be folded flat. To fold the carrycot, move two zippers located below the carrycot to its central part (fig. 19, 20). To unfold the carrycot, lift the handle used to canry the carrycot with a decisive move (fig. 21, 22), then move the zippers located below the carrycot to the outside (fig. 23).

NOTE! Before use, make sure the carrycot is properly assembled.

ASSEMBLING AND DISASSEMBLING THE SEAT

The seat should be assembled and disassembled the same way as for the bassinet (see ASSEMBLING AND DISASSEMBLING THE BASSINET) (fig. 24, 25, 26). The seat may be assembled with its front and back facing the movement direction.

NOTE! Before starting to use the pram make sure that the seat has been assembled correctly.

FOOTREST ADJUSTMENT

The seat unit is equipped with the footrest adjustable in two planes. To change the height of the footrest, press round buttons on both sides of the footrest (fig. 27). To change the length of the footrest, carefully tilt the upper part of the footrest (fig. 28) and move it to the required position (fig. 29).

ASSEMBLY/DISASSEMBLY OF THE BUMPER BAR

The seat is equipped in the safety bumper bar. To assemble the bumper bar, slide its attaching mechanism to the assembly openings on both sides of the seat unit (fig. 30). To disassemble the bumper bar, press buttons on both sides of the bumper bar (fig. 31) and pull it up. NOTE! Always use the seat unit with the bumper bar.

CANOPY OF THE SEAT UNIT

Seat unit is equipped in the canopy. To assemble the canopy, slide its attaching mechanism to the assembly opening on both sides of the seat unit (fig. 32). To disassemble the canopy press red buttons and take it off the openings (fig. 33).

RESTRAINT SYSTEM

The seat is equipped with a 5-point restraint System (fig. 34).11 should be used from the moment a baby Starts to sit by itself. Unfasten the belts, by releasing the forks from the central buckle, seat the baby, adjust the length of the belts so that they fit closely to the baby’s body, without oppressing it, and then fasten the forks of all the belts to the central buckle.

NOTE! Always use the restraint System, if the baby can sit by itself.

ADJUSTING THE BACKREST

The seat is equipped with a four-step adjustment of the backrest angle. To lower the backrest, pull up the plastic lever in the rear part of the backrest (fig. 35), and then set the correct position. To lift the backrest, it is enough to push it upwards until the correct position is achieved. It will get locked automatically (fig. 36).

• BAG
  The pram comes with a practical bag. It attaches to the pram handle using plastic carabiners at designated points above the handle height adjustment (fig. 37). The bag also comes with an additional shoulder strap and a practical baby changer.

• RAIN FOIL
  The pram is provided with a rain foil equipped with an air hole at the baby’s face height. To assemble it, put one end under the footrest or underthe bassinet rear, and pull the other end onto the canopy (fig. 38). The foil is suitable both for the deep and stroller Version.

• MOSQUITO NET
  The stroller is equipped with a practicable mosquito net. To assemble the mosquito net, fasten it by fasteners to the canopy of the carrycot (fig. 39) and then stretch it over the carrycot and the canopy.

• CANOPY AND HANDLE FOR THE CARRYCOT
  The carrycot is equipped in the canopy. Its frame functions as a handle to carry the carrycot (the handle can be used to carry the carrycot itself, not the entire stroller). It is not permitted to carry the carrycot with the baby inside.

NOTE! Before lifting the carrycot, position the handle on the canopy vertically (vertically to the ground). The canopy is equipped in its height adjustment mechanism. To position the canopy in a desired position, press round buttons located on its base (fig. 40, 41 ).

ASSEMBLY AND DISASSEMBLY OF THE CAR SEAT WITH ADAPTER

To assemble the car seat for group aged O+, first assemble the adapters. Insert each adapter properly to the right and left pocket until you hear a clear clicking sound (fig. 42, 43). Next, insert the car seat on the adapters until you hear a clear clicking sound (fig. 44) To disassemble the car seat, press two buttons below the toy bar of the car seat (fig. 45) and lift the car seat up. To disassemble the adapters move the handle located inside the adapter and lift it up (fig. 46).

• SUSPENSION STIFFNESS ADJUSTMENT
  The stroller is equipped with a suspension stiffness adjustment mechanism. To change the suspension into a soft mode, move the handle below the brake bar up (fig. 47). To change it into stiff suspension, move the handle down (fig. 48 ).

• FOLDING THE FRAME
  To fold the frame, press the round button on the right side of the guide bar (fig. 49) and pull the plastic lever on both sides of the stroller (fig. 50). When folding the frame, move the bottom of the basket up (fig. 51 ). It will facilitate folding the stroller and proper positioning of the wheels.

• FOLDING THE FRAME WITH THE SEAT UNIT
  The frame can be folded together with the seat unit. It is possible only if the seat is facing backwards. To use this function, tilt the backrest maximally forward to the seat unit (fig. 52) and fold the footrest maximally under the seat unit (the footrest must touch the bottom of the seat unit. Additionally, the upper part of the footrest must be maximally slid in) (fig. 53). Next, press round buttons on the stroller handle and fold it (fig. 54). Proceed as described in the part

• “ FOLDING THE FRAME” SUNSHADE
  The stroller is equipped with a sunshade that fits to the carrycot. To assemble the sunshade use the zipper on both sides of the canopy (fig. 55), and then place two handles on the sunshade to the bad assembly place (fig. 56).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>