Cuisinart Deluxe Two Burner Gas Grill [GAS0256AS, GAS0256ASO] User Manual
- June 2, 2024
- Cuisinart
Table of Contents
Cuisinart Deluxe Two Burner Gas Grill [GAS0256AS, GAS0256ASO] User Manual
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT.
The following tools are required to assemble this Cuisinart 2 Burner Gas Grill:
- Phillips Screwdriver
PARTS LIST:
- 1 Right Front Leg
- 1 Front Panel (3 parts)
- 1 Left Front Leg
- 2 Side Panels
- 1 Cart Base
- 1 Right Rear Leg
- 1 Left Rear Leg
- 2 Heat Tents
- 1 Tank Holder
- 1 Grease Tray
- 1 Grease Cup
- 2 Cooking Grates
- 1 Warming Rack
- 1 Right Side Table
- 1 Left Side Table
- 1 Grill Body
- 4 Casters
- 2 Right Side Table Brackets
- 2 Left Side Table Brackets
Note : Most hardware is pre-attached to the grill. You may need to loosen some screws partially while others may need to be removed in order to assemble parts. The screws that you remove will be re-used so don’t misplace this hardware.
Extra screws are included in a small bag with the owners manual.
Step 1
- Remove 4 screws
- Attach FRONT PANEL (2) parts
- Install 4 screws
Step 2
- Loosen 10 screws
- Attach FRONT LEGS (1) and (3)
- Tighten 10 screws on FRONT LEGS (1) and (3)
Step 3
- Loosen 4 screws
- Attach SIDE PANELS (4)
- Tighten 4 screws on SIDE PANELS
Step 4
- Remove 4 screws from FRONT LEGS (1) and (3)
Step 5
- Remove 4 screws from CART BASE
Step 6
- Attach TANK HOLDER (9) to CART BASE (5) with 4 screws (Removed from Step 5)
Step 7
- Attach CART BASE (5) to FRONT LEGS (1) and (3)
- Tighten 4 screws on CART BASE (5) (Removed from Step 4)
Step 8
- Remove 4 screws from REAR LEGS (6) and (7)
Step 9
- Loosen 4 screws
- Attach SIDE PANELS (4) to REAR LEGS (6) and (7)
- Tighten 4 screws on SIDE PANELS (4)
![Cuisinart Deluxe Two Burner Gas Grill - Loosen 4 screws - Attach SIDE PANELS
- Tighten 4 screws](https://manuals.plus/wp-content/uploads/2020/12/Pasted- into-Cuisinart-Deluxe-Two-Burner-Gas-Grill-GAS0256AS-GAS0256ASO-User- Manual-14.png)
Step 10
- Attach CART BASE (5) to REAR LEGS (6) and (7)
- Tighten 4 screws (Removed from Step 8)
Step 11
- Lock CASTERS (17)
- Attach CASTERS (17) to legs
Step 12
- Loosen 6 screws on all 4 legs
- Rotate FRONT CART BRACKETS upwards and tighten screws
- Slide REAR CART BRACKETS upwards and tighten screws
Step 13
- Remove 14 screws
Step 14
- Set GRILL BODY (16) on cart (Use two people)
Step 15
- Tighten 3 screws (Removed in Step 13)
Step 16
- Tighten 3 screws (Removed in Step 13)
Step 17
- Attach RIGHT SIDE TABLE BRACKETS (18) and LEFT SIDE TABLE BRACKETS (19) to GRILL BODY (16)
- Tighten 8 screws (Removed in Step 13)
Step 18
- Remove 4 screws from SIDE TABLE BRACKETS (18) and (19)
- Attach LEFT SIDE TABLE (15) on post and replace screws through slotted hole
Step 19
- Attach RIGHT SIDE TABLE (14) on post and replace screws through slotted hole
Step 20
- Remove 2 screws on GREASE TRAY (10)
- Move handle to outside attach with 2 screws
Step 21
- Insert GREASE TRAY (10) and GREASE CUP (11)
Step 22
- Loosen screw on HOSE HOOK and rotate horizontal
- Place hose into HOSE HOOK
- Tighten screw
Step 23
- Install HEAT TENTS (8), COOKING GRATES (12) and WARMING RACK (13)
Model GAS0256AS Assembled
©2019 The Boltz Group LLC Carrollton, Texas 75006 U.S.A.
Cuisinart Deluxe Two Burner Gas Grill [GAS0256AS, GAS0256ASO] User Manual –
Optimized PDF
Cuisinart Deluxe Two Burner Gas Grill [GAS0256AS, GAS0256ASO] User Manual –
Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>