PolskiLED Pixel-1 Timed Lighting Controller Instruction Manual
- June 1, 2024
- PolskiLED
Table of Contents
Products Parameters
PRODUCT NAME
Pixel Stair Lighting Controller
VOLTAGE
DC12V-24V
APPLICATION
Control Stair LED Strips
SUPPORT IC
WS2811.WS2818.5M16703.TM1903
FUNCTION
Adjust Pixel Qty/Delay Time/Brightness/Speed/Color
MODEL NUMBER
Pixel-1
MAX PIXEL QTY
512
MATERIALS
ABS
Product Details
Installation Diagram
Day Light Sensors
Day light sensors OFF Day light sensors ON
PIR sensor work both day and night 6 Levels Lux Setting
The Daylight sensor does not need to be placed visibly near the steps, but it should be able to detect light and dusk.
The sensor has 7 indicator lights. When you switch off the sensor by pressing the button (the control light at ‘OFF’ will turn blue), the lighting will be switched on in the daytime as well as in the evening.
When you press the button again, you switch the sensor on to the desired setting.
| lx Press | the sensor is switched off |
|---|---|
| 2x Press | 5 Lux – the sensor will switch on when it is quite dark |
| 3x Press | 15 Lux |
| 4x Press | 30 Lux |
| 5x Press | 50 Lux |
| 6x Press | 100 Lux |
| 7x Press | 150 Lux – the sensor will switch on when it is light |
How to Use
Brightness
Brightness have 99 levels, short press to add 1 level brightness
Digital display: HHO1 – HH99
| HHO1 | 2% Brightness |
|---|---|
| HHO2 | 3% Brightness |
| HHO3 | 4% Brightness |
| HH99 | 100% Brightness |
Time Delay
Time delay have 99 levels. short press to add 1 level time delay
Digital display: LL01 – LL99
| LL01 | 4S |
|---|---|
| LL02 | 6S |
| LL03 | 8S |
| LL99 | 200S |
Speed
Speed have 99 levels. short press to adjust speed Digital display: EE01 – EE99
| EE01 | 150ms fastest speed |
|---|---|
| EE02 | 175ms |
| EE03 | 200ms |
| EE99 | 2600ms slowest speed |
Setting
Long press “Setting” to set Brightness, Time Delay, Speed, RGB or Single Color, Pixel Qty and Color
Short press “Setting” to enter next setting
After finished all setting, long press “Setting” to save all setting
A.RGB and Single Color
If you connect Single Color Pixel LED Strip to controller, choose “CH-1”
If you connect RGB Pixel LED Strip to controller, choose “CH-3”
B. Brightness
Use”+” “-” to adjust brightness
C. Time Delay
Use”+” “-“to adjust time delay
D. Speed
Use”+” “-“to adjust speed
Please note “EE01” is fastest speed, “EE99” is slowest speed, if you want
faster speed, press “-“. If you want slower speed, press “+”
E. Pixel Qty
Set the Pixel Qty based on your strip
CC01 1 Pixel
C512 512Pixels
Use”+” “-“to adjust the qty of pixels
F. Color
You connect RGB Pixel LED Strip, you can choose the color of the strip
PP01 the first color
PP64 the last color Use “+” “-” to choose color
Sensor installation method
Application Scenario
Product List
