i-JMB SP-0147 Portable LED Bluetooth Speaker Instruction Manual

June 1, 2024
i-JMB

i-JMB SP-0147 Portable LED Bluetooth Speaker

i-JMB-SP-0147-Portable-LED-Bluetooth-Speaker-PRODUCT

ACCESSORIES

  • Speaker: 1pc
  • Charging cable: 1pc
  • Microphone cable: 1pc
  • AUX cable: 1pc
  • Manual: 1pc
  • Microphone: 1pc

SPECIFICATIONS

  • Speaker: 4 inch * 2
  • Input voltage: DC 5V
  • Output power: 2*10W
  • Connections: Wireless connection, Micro SD/TF, USB, FM, TWS, Aux-input, Microphone-input
  • Battery: rechargeable 2400mAh Li-ion battery
  • Operating range: 10m, without obstacles
  • Frequency response: 100Hz-20KHz
  • Distortion: ≤10%
  • S/N ratio: ≥80dB
  • Multimedia interface ports: Wireless connection, Micro SD/TF, Aux-input, Microphone-input
  • FM frequencies: 87.5-108.0Mhz
  • Charging time: up to 2-3 hours
  • Playtime: up to 4-5 hours (70% volume)

DESCRIPTION

  1. OFF / ON Button
  2. Button for LED lighting. With 9 different functions. Press and hold to turn off the light.
  3. Skip to previous song / Press and hold to decrease the volume.
  4. Play/Pause button with scan function: press and hold to automatically scan the radio frequencies.
  5. Skip to next song / Press and hold to increase volume.
  6. MODE button: Wireless function, FM function, USB/TF function, Aux function. Press and hold for TWS mode via Bluetooth connection.
  7. Mic-Input port
  8. Aux-Input port
  9. USB port
  10. Micro SD(TF) card port
  11. Charging port (DC 5V)

BLUETOOTH CONNECTION

Turn on the speaker and the mobile phone or other devices and search for the name “SP-0147″ to start pairing the two devices. After pairing once, the device will be paired automatically. Turn on the speaker and it will automatically enter the Bluetooth pairing mode. After pairing you can start playing songs. Press the ” ” button to play/pause. Press the button to skip to the previous or next music track.

USB/TF CARD

Insert the USB stick or TF card into the USB/TF port. The speaker will automatically read the music in MP3 format. Press the “ ” button to play/pause. Press the button to skip to the previous or next music track.
Note: The memory size of USB/Micro SD devices that can be supported is up to 32GB.

RADIO

Press and hold the ” ” button to automatically scan the radio frequencies. This function will scan all radio stations and store them in memory. The process may take several minutes and should not be interrupted. Press the “button to skip to the previous or next radio station. Press the “ ” button to turn off the volume.
NOTE: The radio signal and station availability is affected by the conditions in your area.

TWS

Two speakers of the same model can be connected simultaneously to one wireless device. The distance between the 2 speakers must be less than 50cm. First, press and hold the MODE button of either speaker until you hear a unique sound, indicating that the pairing between them is successful. Then, turn on your mobile’s Bluetooth, search and select the device “SP-0147”. Before pairing with the wireless device, make sure the two speakers are connected to each other.

CHARGE

  • Insert the USB cable into the speaker’s charging port and connect to the power supply.
  • The red LED indicator light will turn on once charging begins.
  • The LED light will turn off when the speaker charging is completed.

LED LIGHT STATE

WARRANTY OF WIRELESS ELECTRONIC DEVICES SOLD BY «JUMBO SA”

  • The “JUMBO SA TRADING COMPANY” (head office: Moshato Attiki, 9 Cyprus & Hydra) (hereinafter “The Company”) makes every effort to ensure its products meet the standards of suitability and safety of domestic and Community legislation.
  • In wireless electronic devices which fall within the radio equipment marketing (e.g. H/PC mouse, headphones, bell, etc.) through the stores of the Company, it is provided a warranty period of one (1) year from the date of purchase of the product, resulting from the purchase document (receipt or invoice).
  • In case of a manufacturing fault, found on inspection by the authorised department of the Company during the scheduled procedures, the product will be replaced with the same or with another of the same specifications or refunded.
  • In any case, the consumer has all the rights provided by the regulations in force and more specifically the regulations of sale agreements.
  • The above warranty does not cover damage caused by:
    • Incorrect, inappropriate or contrary to the product instructions, installation, use, maintenance or storage of the product.
    • Voltage power drop, conditions of incorrect operation or product exposure to inappropriate and unsuitable environmental conditions.
    • Natural events, accidental or force majeure events, external influences and interventions of all kinds of the buyer or a third part and/or non-specialized and authorized person.
    • Normal wear of the product due to intended use.
  • The Company has no responsibility for any injury and/or property damage (direct or consequential) that may occur from damage or fault of the product caused by any of the abovementioned events. For more information on product warranty issues, please refer to the website: www.e-jumbo.com

HEREBY, THE MANUFACTURER (SHENZHEN GROUND ENTERPRISES CO, LIMITED, FLOOR 6, BUILDING F, MINGYUEHUADU, GONGHE INDUSTRIAL RD, XIXIANG, BAO AN DISTRICT SHENZHEN, GUANGDONG, CHINA) DECLARES THAT (PORTABLE LED BLUETOOTH SPEAKER, ITEM SP- 0147 ) COMPLIES WITH THE ESSENTIAL REQUIREMENTS AND OTHER RELEVANT PROVISIONS OF DIRECTIVE 2014/53/EU.

SHENZHEN GROUND ENTERPRISES CO, LIMITED

DECLARATION OF CONFORMITY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals