PUREMIC S2 Karaoke Speaker System User Manual

S2 Karaoke Speaker System
User Manual

Please read this Manual carefully before using it.

Safety Information

Aputure AL-MW Waterproof Location L...

Aputure AL-MW Waterproof Location Light Review | 4K

Thank you so much for purchasing the Puremic S2 karaoke speaker system. Before using Puranic S2, please read this manual carefully. Pay attention to the safety of use, and correctly operated to avoid unnecessary losses.
Warning:

1. In case of smoke or another abnormal state of the machine, please pull out the power plug immediately and contact the seller for repair to avoid fire and other hazards.
2. If there is water flow in the machine, please cut off the power supply of the machine and contact the seller for repair to avoid electric shock and other dangers.
3. In case of foreign matter falling into the machine, please cut off the power supply of the machine and contact the seller for repair. Never disassemble or reassemble the machine without authorization, otherwise, the components of the machine will be damaged or there will be the danger of electric shock.

Matters Needing Attention

1. Do not place heavy objects on the top of the machine or on the power cord.
2. Do not use it at a high volume for a long time, because such a listening environment will irritate your ears, or even hurt your hearing.
3. Do not forcibly operate the switch, controller, or connection line of the machine to avoid machine failure.
4. Read the operation manual carefully to avoid misoperations.
5. Do not use pesticides, alcohol, paint thinner, or similar chemical solvents to clean the machine, otherwise, it may cause peeling or mix on the surface of the chassis turbid corrosion, please wipe with a clean dry cloth.
6. If you do not use the machine for a long time, please remove the AC power plug.
7. This speaker should not be subjected to water droplets or splashes. The machine should not be placed on objects such as vases filled with liquid, otherwise, water and other liquids careless spills may damage the machine.
8. Avoid placing cosmetics, potions, insecticides, etc. on Speaker, otherwise, water and other liquids may damage the cover or make inflammable and explosive articles causing damage to the machine when heated.
9. Avoid forcibly pulling the bending power cord and other components. To move the unit, unplug the power supply first.
10. The disconnecting device of this product is the power plug. The easy operation should be maintained.

Warranty Information

1-year Limited Warranty for Manufacturer’s Defects.
During the warranty period, the parts necessary will be provided free of charge to make the product capable of being operated for its ordinary purpose. This warranty does not include transport, delivery, or handling charges incurred in the transportation to and from the seller.
Limitations of the Warranty
This warranty is effective only for the ORIGINALLY PURCHASE and not for resale.
Therefore under circumstances, rights under this warranty are not assignable.
This warranty will not apply to any failure due to any of the following:

1. Improper maintenance or repair, including the installation of parts or accessories that do not conform to the quality and specifications of the original parts.
2. Misuse, abuse, neglect, and improper installation.
3. Usage of wrong electrical supply/voltage.
4. Usage is not in accordance with the instruction manual.
5. Accidental or intentional damages.
6. Corrosion rust or stains.
7. Normal wear and tear.
8. Breakdowns caused by other appliances.
9. Damages due to unsuitable packaging and /or shipment method.
10. Damages due to natural disasters or acts of war or public disturbances.
11. Repairs or alterations by an unauthorized agency.

Packing List

Microphone Key Description

Indicator Light Description

Speaker Functions

Connection Ports

1. AC power (100-220V– 50/60Hz)
2. Source selection button
3. Optical connection, HDMI (ARC), 3.5mm Aux connection, Coaxial connection
4. Service port (for servicing only)
5. USB-A connection (for firmware updates and servicing only)
6. Microphone pairing button
7. Speaker reset button

How To Use

Via Bluetooth
Press the Bluetooth button on the speaker, use TV/PHONE to search for “Puremic S2” and connect. For Phone connecting, you also can put your phone close to the speaker NFC area for connecting.
Via Cable Connect
(Except HDMI cable, other cables are not included)
Use cables like Optical, HDMI(ARC), 3.5mm  AUX, and Coaxial to connect with TV/Phone. Press the SOURCE button to switch the input mode.

Microphone Charging
Power on the speaker Puremic S2, and place the microphone into the dock for charging.
A flashing green light indicates the microphone is charging. A solid green light indicates the microphone is fully charged. After a while, the indicator light will turn off.

S2 Speaker Parameters

3.0″ treble unit x 2
The speaker power| 120W
Frequency response range| 45~20K Hz
The input parameters| 100-220V~ 50/60Hz
The speaker impedance| 10Ω
The communication distance| 10m
(open and barrier-free environment)
Product size| 450×220×220mm

S2 Microphone Parameters

lithium battery
Working current| 68mA
The input specifications| 5V **** 1A
Pick up way| Moving coil
Directivity| Heart shape
Sensitivity| -52dB±3dB
Output impedance| 600Ω
Signal /Noise ratio| ≥75dB
Frequency response| 50Hz～14KHz
Transmission power| 12dBm
Communication| 10m
(open and barrier-free environment)
Products Size| 173mm×φ38.8mm

Troubleshooting

If the power indicator light of the microphone is not on, ensure the microphone battery is charged.

The microphone does not emit sound

1. Check if the microphone or speaker volume is not at the lowest.
2. Check if the microphone is turned on (the indicator light should be solid blue).
3. If the indicator light is not blue, try to pair the microphone with the speaker again.

The microphone can’t be charged

1. Check if the speaker is powered on.
2. Check if there are any foreign objects in the dock.
3. Test the microphone charging in another dock to determine if it’s a microphone or dock issue, then request assistance from the seller.

Speaker does not emit sounds

1. Check if the speaker is powered on.
2. Check if the speaker volume is not at the lowest.

For more information please visit our INS & Facebook accounts.

FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID: 2A7ZR-PWMAZ-Q2 (Microphone)
FCC ID: 2A7ZR-S2B01 (Speaker)

https://www.facebook.com/Puremickaraoke

Shanghai Loostone Information Technology Co., Ltd.
Songjiang Stj Park, Shanghai,
China
www.loostone.com

References

• 上海炉石信息科技有限公司

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>