KEENETIC KN-4510 Characteristics Injector PoE Plus Adapter Instruction Manual
- June 1, 2024
- KEENETIC
Table of Contents
KEENETIC KN-4510 Characteristics Injector PoE Plus Adapter
Specifications
- Model: Keenetic PoE+ Adapter (KN-4510)
- Part Number: KN-4510-01-EU
- Description: Gigabit PoE+ Adapter with 30 W Power Supply
Product Information
The Keenetic PoE+ Adapter is a Gigabit PoE+ Adapter that comes with a 30 W power supply. It is designed to provide power and network connectivity to compatible devices through a single Ethernet cable.
Key Features
- PoE LED for status indication
- PoE Network Port for power and data transfer
- LAN Network Port for network connectivity
- Power LED for power status indication
- Power Connector for connecting the power supply
Physical Specifications and Environment Requirements
The Keenetic PoE+ Adapter should be used in a well-ventilated area with ambient temperatures within the specified operating range. Avoid exposing the device to moisture or extreme temperatures.
Package Contents
- Keenetic PoE+ Adapter
- Power Supply
- Quick Start Guide
Ordering Information
Model Name: Keenetic PoE+ Adapter (KN-4510)
Part Number: KN-4510-01-EU
Description: Gigabit PoE+ Adapter with 30 W Power Supply
Product Usage Instructions
- Connect the Power Connector to the Keenetic PoE+ Adapter.
- Connect the LAN Network Port to your network device using an Ethernet cable.
- Connect the PoE Network Port to the compatible device requiring power and network connection using an Ethernet cable.
- Observe the PoE LED and Power LED for status indications.
FAQ
- Q: What should I do if the Power LED is not turning on?
- A: Check the power supply connection and ensure that the adapter is receiving power. If the issue persists, contact customer support for assistance.
- Q: Can I use the Keenetic PoE+ Adapter outdoors?
- A: It is recommended to use the adapter in indoor environments to protect it from exposure to harsh weather conditions.
Parts
- PoE LED
- PoE Network Port
- LAN Network Port
- Power LED
- Power Connector
Key features
- Model number: KN-4510
- Ethernet ports: 2 x 1 Gbps: 1 x RJ-45, 1 x RJ-45 + PoE-out
- PoE power per port: 30 W 802.3af/at (PoE+)
- PoE mode: A: 1,2(+) 3,6(-)
- PoE auto-sensing
- Single-cable Deployment for Wi-Fi Access Points, IP Cameras and IP Phones
- Compliant with IEEE 802.3af/at Standards
- Easy to Install, no Configuration Required
- Status Lights for Convenient Monitoring
- Compact Size with Built-in Power Supply
Troubleshooting and management
- Power LED
- PoE LED(s)
Specifications
Physical specifications and environmental requirements
- Device dimensions excluding antenna, w x d x h: 60 mm x 132 mm x 34 mm
- Device weight: 180 g
- Operating temperature: 0–40 °С
- Operating humidity: 20–95% non-condensing
- Power supply voltage: 100–240 V 50/60 Hz Package contents
- Device
- Power cord
- Quick start guide
Ordering information
Keenetic Limited, 2024. All rights reserved.
Names of products or companies mentioned herein may be the trademarks or service marks of their respective owners. Keenetic Ltd. reserves the right to make changes and improvements to any product without prior notification.