HE01 WXD Smart Tag

Specifications

• Dimensions: 75mm x 60mm
• Model: WXD Smart Tag
• Battery: 1 CR2032 Lithium battery

Description of Parts

• Function button
• Battery cover

Key Features

The WXD Smart Tag helps you keep track of your valuable items by
easily locating them using the Find My App.

Safety Instructions

Avoid exposing the device to excessive heat sources such as
direct sunlight or fire. Keep the device away from children and
dispose of used batteries immediately.

Battery Replacement

To replace the battery:

1. Use a flat-head screwdriver to pry apart the front and rear
   covers.

2. Replace the CR2032 button battery with the correct polarity
   (negative side down, positive side up).

3. Put the front cover back on and press to tighten both
   covers.

Instructions for Use

Switch on/off the unit

Switch on: Short press the function button once
to turn on the device with a ringtone indication.

Switch off: Long press the function button for
three seconds until two beeps are heard to power off the
device.

Add your item to the Find My App

1. Open the Find My App on your supported Apple device.

2. Allow notifications from the App.

3. Select Items at the bottom, then tap Add Item.

4. Select Other Supported Item and wait for the Smart Tag to
   appear.

5. Follow the on-screen instructions to connect and set up your
   item.

6. Your item’s last known location will be displayed on the
   map.

Lost Mode

If your item is lost, you can enable Lost Mode to lock it and
prevent pairing with a new device. You can also set a message for
the finder.

Rename Item

You can rename your connected item through the Find My App for
easier identification.

About the Find My App

The Find My app helps you track your Apple devices and items
like the Smart Tag. It ensures privacy and easy location tracking
even when offline.

FAQ

How can I prevent my device from being used for malicious

tracking?

Important tips:

• When pairing with Find My app, ensure stable network
  connection.

• If pairing fails, try changing network settings or resetting
  the item.

• Do not remove the item while Lost Mode is enabled to prevent
  unauthorized pairing.

75MM

60MM
WXD
Smart Tag
(KEEP TRACK OF YOUR VALUABLE ITEMS)
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE

Getting Started
· Remove the product from the packaging. · Please retain all packaging after you have checked and counted all
the parts and the contents against the parts list.
Package Contents
· Smart Tag · CR2032 battery (preinstalled in the product) · Instruction Manual
Key Features
· Smart Tag device · Uses Apple Find My App to locate your device · Locate from iPhone, iPad, iPod Touch or Mac computer · Simply attach the device to your keys, wallet, purse and you can start
locating it remotely from your App · Replaceable battery (button cell battery included) · Siri compatible
Safety Instructions
· Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
· Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent damage to the unit.
· Do not use the unit if it has been dropped or damaged in any way. · Repairs to electrical equipment should only be performed by a qualified
electrician. Improper repairs may place the user at serious risk. · Do not use the unit with wet hands. · Do not put objects into any of the openings. · Keep the unit free from dust, lint etc. · Do not use this unit for anything other than its intended use. · Keep the unit out of reach of children. · This appliance is not a toy. · Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.

Specifications
· Bluetooth version: Bluetooth 5.2 · Size (without the chain): Length 1.68 inches (42.7mm), Width 1.90
inches (48.3mm) and Height 0.264 inches (6.7mm) · Suitable for: Keys, Wallet, Purse or other belongings · Battery: CR2032 battery · Standby time: About 6-8 months · Net weight (with the battery inside): ~0.3 oz (~8.5g) · App Name: Find My
Description of Parts

Function button

Battery cover

Battery Replacement
This item includes the battery (1 CR2032 Lithium battery); when battery is drained, replace battery as below:
1. Use a flat-head screwdriver to pry apart the front and rear covers.

2. Replace the new CR2032 button battery according to the polarity
indicated (negative side down, positive side up). 3. Put the front cover back on and press with your fingers to tighten
the front and rear covers.

WARNING
This product contains a Button Cell Battery. A swallowed Button Cell Battery can cause internal chemical burns leading to death in as little as two hours. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Do not mix with used or other types of batteries.
Instructions for Use Switch on/off the unit Switch on: short press your device’s function button once to turn on, it should have ringtones indication, indicating it is powered on.
Switch off: long press the function button three seconds until two beeps are heard, indicating your device is powered off.
Add your item to the Find My App
1. Open “Find My” App on your supported iPhone, iPad, iPod Touch or Mac computer.
2. Allow notifications from the App. 3. Select “Items” at the bottom, then tap “Add
Item”.

4.Select “Other Supported Item” 5.It will pop-up “Searching Items”

6.Make sure your Item Locator is close to your phone. Wait … until you see “Smart Tag “, then, tap ” Connect”.

8.When “This Item Is Linked to Your Apple ID” is pop-up, tap “Agree”

7.Follow the pop-up to add a name, and select an emoji for your connected item, then click “Continue”.

9.Click “Finish” to finish your item set-up.

Function Introduction · Find Items – Click “Play Sound” to make your
Item Locator beep when it is nearby. · Find your Item Locator’s location ­ Your
Item Locator’s last known location will appear on the map as emoji you choose during set-up, tap “Directions” to navigate to the last known location.
Function Introduction · Enable the “Notify When Found” toggle,
when your Item location is seen by another “Find My” enabled device, you will receive a notification of its updated location. · Enable the “Notify When Left Behind” toggle, you will receive a notification when you leave your Item Locator behind and it is no longer in range of your device.
Note: “Notify When Found” can only be activated when your Item Locator is out of range.

Lost Mode
· When your item is lost under “Lost Mode”, tap the “Enable” tab, a screen calling Lost
· Mode will pop up, tab “Continue”. You can enter your phone number or email address and tap “Next”.
· You may enter a message that will be shared with the person that finds your item. Tap “Activate” to enable “Lost Mode”.
Note: · When “Lost Mode” is enabled, “Notification
When Found” is automatically enabled. · When “Lost Mode” is enabled, your Item is
locked and cannot be paired to a new device.
Rename Item
· Name of the item can be renamed.
Rename Item
· Make sure “Lost Mode” is disabled and click “Remove Item”. After selecting the option, the system will pop up “Remove Item?” and click “Remove” to remove the device.
· The Item is now reset and ready to pair to a new device.

System Requirements and Compatibility · Apple ID · iPhone and iPod touch models with iOS 14.5 or later. · iPad models with iPadOS 14.5 or later.
About the Find My App The Find My app makes it easy to keep track of your Apple devices-even if they are offline. You can also locate items using Smart Tag or Find My technology. Plus, you can keep up with friends and family. And your privacy is protected every step of the way. Links: https://www.apple.com/icloud/find-my/
Learn More · This item can be located by its owner using the Find my app.
For more information, follow the instructions below. · Locate the button on the front of the device. · Press the button twice. You will hear a confirmation sound. · Tap “Continue On Website” for more information including
any Lost Mode message from the owner.
How to Disable · Locate the button on the front of the device. · Long press the function button three seconds until two beeps
are heard. This will stop sharing the location of this item.
Factory Reset · Press the button 4 times rapidly and then hold it a fifth time
until you hear a ringing chime. · A reset operation is required to enable the device to enter the
pairing state again (synchronization of Find My also requires simultaneous unbinding) and rebind the new Apple ID account.

How can I prevent my device from being used
for malicious tracking
When someone else’s device mixes with your belongings, and tracks it over a period of time, you will be reminded in below two ways: · If you have an iPhone, iPad, or iPod touch etc Apple device, you will get alerts on your Apple device. This feature is available on iOS or iPadOS 14.5 version or above. · If someone else’s device finds its way into your stuff, your iPhone will notice it is traveling with you and send you an alert. After a while, if you still have not find it, the item will start playing a sound to let you know where it is.
Important tips:
When pairing a device with Find My app, the phone will link to the Apple server. Pairing may fail because of network problems. The following action is recommended. a. Change the phone’s network, such as switching between WiFi and mobile. The first pairing may take a long time, please wait patiently. b. Reset your item. c. When “Lost Mode” is enabled, DO NOT REMOVE ITEM in the APP. Your Item Locator will be locked and cannot be paired to a new device.
Apple, Apple Watch, iPad, iPadOS, iPod touch, Mac, and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Care and maintenance
Read the following recommendations before using the unit. Following these you will be able to enjoy the product for many years. · Don’t expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected. · Don’t use abrasive cleaning solvents to clean the unit. · Don’t expose the unit to extremely high or low temperature as this will

shorten the life of electronic devices, destroy the battery or distort certain plastic parts. · Don’t dispose of the unit in fire as it will result in an explosion. · Don’t expose the unit to contact with sharp objects as this will cause scratches and damage. · Don’t let the unit fall down onto the floor. The internal circuit might get damaged. · Don’t attempt to disassemble the unit as it may get damaged if you are not professional.
FCC Instructions
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the product and receiver. – Connect the product into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Limited Warranty
This manufacturer’s product warranty extends to the original consumer purchaser of the product. Neither the retailer nor any other company involved in the sale or promotion of this product is a co-warrantor of this manufacturer warranty.
WARRANTY DURATION: All materials and workmanship are warranted to the original consumer purchaser for a period of ninety (90) days from the original purchase date.
WARRANTY COVERAGE: This product is warranted against defective materials or workmanship. This warranty is void if the product has been damaged by accident, in shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs by unauthorized personnel or other causes not arising out of defects in materials or workmanship. This warranty doesn’t cover the following which may be supplied with this product, including but not limited to; LCD Screens, glass parts, lenses, bulbs etc. This warranty is effective only if the product is purchased and operated in USA and Canada, and does not extend to any units which have been used in violation of written instructions furnished by manufacturer or to units which have been altered or modified or, to damaged products or parts thereof which have had the serial number removed, altered, defaced or rendered illegible.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume for manufacturer any other liability in connection with the sale of our products. There shall be no claims for defects or failure under any theory of tort, contractor commercial law including but not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of contract. Under no circumstances will Manufacturer’s / Distributor’s maximum liability exceed the retail value of the product.

WARRANTY PERFORMANCE: During the above 90 day warranty period, a product with a defect will be either repaired or replaced with a reconditioned comparable model (at manufacturer’s option). The repaired or replacement product will be in warranty for the balance of the 90 day warranty period and an additional one-month period. No charge will be applicable for such repair or replacement.
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a precautionary measure, carefully package the product for shipment, and insure it with the carrier. Be sure to enclose the following details with the product: your full name, return address and daytime phone number, a note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D. shipments cannot be accepted.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluatec to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.

References

• iCloud+ - Find My - Apple

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>