WOOC 2498549 Bicycle Wall Hook Instruction Manual
- June 3, 2024
- WOOC
Table of Contents
WOOC
2498549 Bicycle Wall Hook
Instruction Manual
2498549 Bicycle Wall Hook
http://www.conrad.com/downloads
Installation Instructions
Bicycle wall hook
Item no: 2498549
Intended use
The product is a bicycle wall holder/hook. Use the product to hold or hang
bicycles. Do not use the product to hang other objects than bicycles or for
physical exercise. The product must be installed permanently on a suitable
surface.
If you install the product outdoors, it must be protected from water, rain,
and snow.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product. Read the installation instructions carefully and store them in a safe
place. Make this product available to third parties only together with the
installation instructions. All company names and product names are trademarks
of their respective owners. All rights reserved.
Delivery contents
- Wall hook
- Wall protector with adhesive tape
- 4x Screws and dowels
- Installation instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the
information carefully.
The symbol warns of dangerous voltage that can lead to personal injury by
electric shock. Read the information carefully.
Safety instructions
Read the installation instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children
- If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorized repair center.
5.2 Handling
- Sharp edges can result in cuts. Wear protective gloves while handling or installing the product.
- Moving parts can trap body parts. Keep fingers and other body parts away from moving parts.
5.3 User requirements
- The installation requires specialist knowledge. If the product is installed incorrectly, it can fall down and cause serious personal injuries. Instruct a specialist to install the product if you do not have the necessary knowledge.
- It may be difficult to hold and install the product at the same time. The product can fall down and cause injury. Ask a second person for help with the installation.
5.4 Drilling
- When penetrating the surface (for example drilling or inserting fasteners), make sure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock! Check for concealed wires and pipes before drilling or inserting fasteners.
5.5 Installation location and surface
- The product protrudes from the installation location. Passers-by may bump against the product and injure themselves. Select an installation location that reduces the risk of accidents.
- Unsuitable installation surfaces can cause the product to fall down and result in serious personal injury. Select an installation surface that can permanently withstand the combined weight of the product and the load.
5.6 Installation materials
- Wrong installation materials can cause the product to fall down and result in injury. Select installation materials including screws, wall plugs, bolts, and studs that are suitable for the installation surface and that can withstand the combined forces of leveraging effect, the weight of the product, and load.
5.7 Do not overload
- Overloading can cause the product to fall down or break and cause injury. Never exceed the maximum permissible load given in the product specifications.
5.8 Check for loose components
- Screws and bolts can become loose over time. The product can fall down and cause injury. Check all screw fastenings at least every 3 months and tighten them if loose.
Usage
Technical data
Wheel width……………………………… max. 55 mm
Loading……………………………………. max. 16 kg (bicycle hangs) max. 25 kg (bicycle touches
the ground)
Dimensions (W x H x D) (approx.) . 170 x 350 x 65 mm
Weight (approx.) ………………………. 425 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited. This publication reflects the technical status at the
time of printing.
Copyright by Conrad Electronic SE.
*2498549_V1_0222_jh_mi_en pj-id: 9007199685009035-1 i/o: I2/O1 edtl-id: en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>